|
| 1 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the-Engineer-in-charge within a distance of 60 m (200ft.) as per PWD S.No. 692 (GST will be paid extra as applicable but including labour cess) |
| 2 | Dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 m. as per PWD S.NO. 694 (GST will be paid extra as applicable but including labour cess) |
| 3 | Earth work in excavation of foundation of structure as per drawing and technincal specification including setting out construction fo shoring and bracing, removal of stumps and others deleterious matter, dressing of sites and bottom and back filling with approved material. As per MoRTH Specification 304 & Sr. No. 12.01 I(B) (GST will be paid extra as applicable but including labour cess) |
| 4 | Construction of embankment with material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with Cartage Earth as per Technical Specification Clause 301.5 & Mord SL No 3.4 (GST will be paid extra as applicable but including labour cess) (Cartage Earth) |
| 5 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader/Tractor mounted appropriate equipment on prepaire suface mixing by mix in place method with rotavator at OMC, and compacting with smooth roller to achieve the desired density, complete as per clause 401 & MoRD Sr. No. 4.1 B (GST will be paid extra as applicable but including labour cess) |
| 6 | Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheeled road roller 80-100 kN as per Technical Specification Clause 412 and MoRD Sr. No. 4.18 (GST will be paid extra as applicable but including labour cess) |
| 7 | Prividing and laying RCC Hume Pipe NP-3 1000mm dia including Collars/spigot and Sockets type joints, confirming to BIS Specification as per S.I. 458:203 Chapter-1 Sr. No. 60(C) (GST will be paid extra as applicable but including labour cess) |
| 8 | CTSB- Providing, Laying and spreading Material on a prepared sub grade, adding cement (OPC) @ 2% by weight to the spread material, manully, mixing in place with rotavator and compaction with the road roller at OMC to achive the desired unconfined compressive strength and to from a layar sub-base. (GST will be paid extra as applicable but including labour cess) |
| 9 | CTB- Providing, Laying and spreading Material on a prepared sub-base, adding cement (OPC) @ 4% by weight to the spread material, manully, mixing in place with rotavator and compaction with the road roller at OMC to achive the desired unconfined compressive strength and to from a layar base. (GST will be paid extra as applicable but including labour cess) |
| 10 | Tack Coat- Providing and applying tack coat with bitumen VG- 10 grade using pressure distributor at the rate of 0.35 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom. As per T.S.C. 503 & MORD specification Sr N0-5.2(IV). (GST will be paid extra as applicable but including labour cess & Bitumen. |
| 11 | Premix Carpet- Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm and 11.2 mm aggregates (Dala quarry) either using VG-10 grade bitumen to required line grade and level to serve as wearing coarse on a previously prepared base by manual means including mixing in a sutabule mixol laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades. as per T.S.C. 508. & MORD specification Sr No-5.9 (GST will be paid extra as applicable but including labour cess & Bitumen. |
| 12 | Seal Coat type C- Providing and laying seal coat by manual means with VG- 10 grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per T.S.C. 510 & MORD specification Sr. N0-5.12 (GST will be paid extra as applicable but including labour cess & Bitumen. |
| 13 | Boulder Apron Laid dry without Wire Crates Providing and laying of boulder apron on river bed for protection against scour with stone boulders weighing not less than 40kg each complete as per drawing and technical specification 2503 & MoRTH Sr. No. 16.01 (Including labour cess but GST will be paid extra as applicable) |
| 14 | Providing and laying filter Material under neath pitching in slopes complete as per drawing and Technical specifications 2504 & MoRTH Sr No. 16.05 (Including labour cess but GST will be paid extra as applicable) |
| 15 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications 2504 & MoRTH Sr No. 16.04 (Including labour cess but GST will be paid extra as applicable) |
| 16 | Providing and constructing one span service road to reach island location from one pier location to another pier location as per MoRTH Specification 1200 & Sr. No. 12.09 C (Including labour cess but GST will be paid extra as applicable) |
| 17 | Providing and Constructing Temporary Island 16 m diameter for Construction of Well Foundation for 5.0 m dia. Well. as per MoRTH Specification 1200 & Sr. No. 12.09 A (Including labour cess but GST will be paid extra as applicable) |
| 18 | Providing and laying cutting edge of miled steel for well Foundation complete as per drg. And tech.Sps. as per MoRTH Specification 1200 & 1900 and Sr. No. 12.10 (Including labour cess but GST will be paid extra as applicable) |
| 19 | Plain/Reinforced Cement Concrete in Well Curve complete as per Drawing and Technical Specifications. M-30 as per MoRTH Specification 1500, 1700, 2200 & Sr. No. 12.11A (iii) (Including labour cess but GST will be paid extra as applicable) |
| 20 | Plain/Reinforced Cement Concrete in Well Steining complete as per Drawing and Technical Specifications. M-30 as per MoRTH Specification 1500, 1700, 2200 & Sr. No. 12.11B (vi) (Including labour cess but GST will be paid extra as applicable) |
| 21 | Plain/Reinforced Cement Concrete in Well Foundation complete as per Drawing and Technical Specifications. False Steining M-15 as per MoRTH Specification 1500, 1700, 2200 & Sr. No. 12.11B (i) (Including labour cess but GST will be paid extra as applicable) |
| 22 | Plain/Reinforced cment cone , in well found,compl, as per drawing and technical. C.Bottom Plugging M-25 as per MoRTH Specification 1500, 1700, 2200 & Sr. No. 12.11C (ii) (Including labour cess but GST will be paid extra as applicable) |
| 23 | Plain/Reinforced Cement Concrete in Well Foundation complete as per Drawing and Technical Specifications. Intermediate plug M-20 as per MoRTH Specification 1500, 1700, 2200 & Sr. No. 12.11D (i) (Including labour cess but GST will be paid extra as applicable) |
| 24 | Plain/Reinforced Cement Concrete in Well Foundation complete as per Drawing and Technical Specifications. well cap M-30 as per MoRTH Specification 1500, 1700, 2200 & Sr. No. 12.11F (iii) Case-I (Including labour cess but GST will be paid extra as applicable) |
| 25 | Sinking of 5.0 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level. upto 3.00 mtr depth as per MoRTH Specification 1200 & Sr. No. 12.12A (Including labour cess but GST will be paid extra as applicable) |
| 26 | Sinking of 5.0 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level. Beyound 3.00 mtr to 10 mrt depth as per MoRTH Specification 1200 & Sr. No. 12.12A (Including labour cess but GST will be paid extra as applicable) |
| 27 | Sinking of 5.0 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level. 10.00 mtr to 20 mrt depth as per MoRTH Specification 1200 & Sr. No. 12.12A (Including labour cess but GST will be paid extra as applicable) |
| 28 | Supplying, fitting and placing uncoated HYSD bar reinforcement in Foundation complete as per drawing and technical specifications as per MoRTH Specification 1600 & Sr. No. 12.42 (Including labour cess but GST will be paid extra as applicable) |
| 29 | Sand filling in Wells complete as per Drawing and technical specification as per MoRTH Specification 1207 & Sr. No. 12.21 (Including labour cess but GST will be paid extra as applicable) |
| 30 | Plain/Reinforced Cement Concrete in Sub-Structure complete as per Drawing and Technical Specifications. Grade M-30 as per MoRTH Specification 1500, 1700 & 2200 & Sr. No. 13.05 G Case-I (Including labour cess but GST will be paid extra as applicable) |
| 31 | Supplying, fitting and placing uncoated HYSD bar reinforcement in Sub Structure complete as per drawing and technical specifications as per MoRTH Specification 1600, 2200 & Sr. No. 13.06 (Including labour cess but GST will be paid extra as applicable) |
| 32 | Supplaying, fiting and Fixing in position true to line and level elastomeric bearing conforming to be as per IRC 83 part II section IX Clause 2005 of MoRT & H Specification compl. as per. Drawing and technical. 500mmx320mmx84mm as per MoRTH Specification 2000 & 2200 Sr. No. 13.16 (Including labour cess but GST will be paid extra as applicable) |
| 33 | Furnishing and Placing Reinforced cement concrete in super-structure as per drawing and Technical Specification. RCC/PSC Grade M40 for Beam, Deck Slab etc in Super Structure. as per MoRTH Specification 1500, 1700 & 1600 Sr. No. 14.01 E (ii) (Including labour cess but GST will be paid extra as applicable) |
| 34 | Furnishing and placing Cement concrete wearing coat M-30 Grade including reinforcement in super structure complete as per drawing and technical specification. as per MoRTH Specification 2702 Sr. No. 14.04 (Including labour cess but GST will be paid extra as applicable) |
| 35 | Plain Cement Concrete M15 Grade leveling course below approach slab complete as per Drawing and Technical Specifications. PCC Grade M-15 as per MoRTH Specification 2700 Sr. No. 14.10 (Including labour cess but GST will be paid extra as applicable) |
| 36 | RCC approch slab including reinforcement and formwork complete as per drawing and technical specification. 1) RCC Grade M-30 as per MoRTH Specification 1500, 1700 & 2704 Sr. No. 14.11 (Including labour cess but GST will be paid extra as applicable) |
| 37 | Construction of RCC railing of M 30 grade in -situ with 20mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500,centre to centre spacing between vertical post not to exceed 2000 mm leaving adequate space as per MoRTH Specification 2703, 1500, 1600 & 1700 Sr. No. 14.07 (Including labour cess but GST will be paid extra as applicable) |
| 38 | Supplying fitting and placing HYSD bar reinforcement.in Super Strcture complete as per drawing and technical specifications as per MoRTH Specification 1600 Sr. No. 14.02 (Including labour cess but GST will be paid extra as applicable) |
| 39 | Drainage Spouts complete as per drawing and Technical specification. as per MoRTH Specification 2705 Sr. No. 14.09 (Including labour cess but GST will be paid extra as applicable) |
| 40 | Providing & applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease effloresecence and applying paint @ 1 litre for two sqm. as per MoRTH Specification 800 Sr. No. 14.16 (Including labour cess but GST will be paid extra as applicable) |
| 41 | Back filling behind abutment wing wall & Returnwall Complete as per drawing & technical specification as per MoRTH Specification 710.1.4 OF IRC:78 & 22 Sr. No. 15.23 (Including labour cess but GST will be paid extra as applicable) |
| 42 | Strip Seal Expansion Joint Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer\"s instructions for installation.as per MoRTH Specification 2607 & Sr. No. 14.21 (Including labour cess but GST will be paid extra as applicable) Please Enable Macros to View BoQ information |
