Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of brick tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified and as directed by Engineer-in-charge. |
| 2 | Demolition mud in roofs, any thickness, including plastering and leaping etc including removing rubbish upto 500 mtr from the site complete all as specified and as directed by Engineer-in-charge |
| 3 | M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in roof padding, roof kerbs or mud stops, bed blocks, back filling in chowkhats, benching etc including necessary form work complete all as specified and directed. |
| 4 | Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work, complete all as specified and directed. |
| 5 | M&L for Rendering 10 mm thick cement mortar 1:4 mixed with integral water proofing compound as per manufacturer instruction over the padding concrete while still the concrete is still green,complete all as specified and as directed by Engineer-in-charge |
| 6 | M&L for water proofing treatment to roof surface includingparapet wall and sunkun portion comprising with the following course of treatment/ specifications form bottom to top:-(a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing.Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer\"s instructions.(ii) A minimum overlap shall be 75mm length wise and 100 mm width wise ofpolymeric membranes respectively and sealed all overlaps and joints as manufacturer\"s instructions. |
| 7 | M&L for two coat of aluminium paint over APP membrane complete all as specified and as directed by Engineer-in-charge |
| 8 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc complete all as specified and directed. |
| 9 | M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radiuscomplete all as Specified and Directed. |
| 10 | All as per srl item No 09 here-in-before but using old bricks retrieved from dismantling under ser item 08 here-in-before including cleaning and removal of mortar from old bricks etc complete all as specified and directed. |
| 11 | Taking down cement plaster on brick walls of any description includingracking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 12 | M&L for Rendering 12 mm thickin cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M & L Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, using WPC, surfaces finished even and smooth without using extra cement complete all as specified & directed. |
| 14 | M&L for Rendering 5 mm thick cement plaster on ceiling surfaces in cement mortar 1:3 finished fair and evenwithout using extra cement complete all as specified |
| 15 | M & L for complete removal of old existing treatmentover Celling and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as directed. |
| 16 | M&L for preparing newly plastered surfaces of wall and applying 2 coats of distemper oil emulsionover 2mm thick wall care putty of any shade on walls surfaces, complete all as specified and directed. |
| 17 | M&L for Preparation of new plastered surfaces of ceiling & applying two coats of distemper oil emulsion over 2mm thick wall care putty, complete all as specified and directed |
| 18 | M&L for complete removal of existing treatment on surfaces of walls apply two coat of distempering of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification using paint roller technology and providing2mm thick wall care putty and sanding the surface to prepare the surface even and smoothcomplete all as Specified and Directed. |
| 19 | M & L for applying two coats of white wash on old Ceiling surface including preparation of surface complete all as Specified and Directed. |
| 20 | Material & LabourPreparationation newplastered surface for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over2 mm thick wall care putty over new surfaces complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces. |
| 21 | M&L for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over2mm thick cement base putty and sanding the surface to prepare the surface even and smooth complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces. |
| 22 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site to store or otherwise as directed complete all as specified and directed. |
| 23 | All as per srl item No 22 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each ccomplete all as specified and directed. |
| 24 | Taking down shutters only of any description exc 1 sqm and not exc 2 sqm each including removing from site to store or otherwise as directed complete all as specified and directed. |
| 25 | S&F Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mmincluding one shop coat of red oxide primer, complete all as specified and directed. |
| 26 | M & L Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified & directed. |
| 27 | S&F 30 mm thick, flush shutter, solid core construction, with particle board core and plywood face panel, commercial type both sides complete all as specified and directed. |
| 28 | S&F 35 mm thick, 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etcfor doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed. |
| 29 | S&FFactory made box type steel window with side hung shutter including pintol hinges& 2 Nos150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified including making good jambs portion by providing plaster in CM 1:4 and finishes as per existingcomplete all as Specified and Directed. |
| 30 | S&FFactory made box type steel window with side hung shutter including pintol hinges& 2 Nos150 mm MS tower bolts on each shutter complete without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified ,including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as Specified and Directed. |
| 31 | S&F Factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drg No CEJZ/TD-1019/08 & CEJZ/TD-1020/08” |
| 32 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as Specified and Directed. |
| 33 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheetrainforced with MS square tube complete all as specified and directed. |
| 34 | M & Lsolid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site complete all as Specified and Directed. in clause 8 B.2.1 of MES schedule Part-II (2004). |
| 35 | S&F 18mmthick Celuka plywood of grade 1 quality, one side prelaminated plain plain and other side plain white colour fixed with screws, solvent cement/adhesive to make cupborad shutters /shelves including dismatnling of boarding , any description , fixed inany position with nails, complete all as specified and directed. |
| 36 | Dismantling timber scantling unframed work as in fillets, rails, posts, rafters, purlins,etc under 40 Sq.cm in section complete all as specified and directed. |
| 37 | M&L in repair for Plain fillets of 2nd class hard wood, square or rectangular or triangular in section, clean sawn, secured with nails and brads area n exc 3 Sq cmcomplete all as directed |
| 38 | M & L Painting to new wooden or wood based surfaces of any description, over 10cm width or girth in two coats with synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified & directed. |
| 39 | M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed |
| 40 | S & F PTMT butt hings, 100 mm long , fixed with steel screws with brass/bronze hinge pincomplete all as specified and directed. |
| 41 | S&F Aluminiumbow handle 150 mm long and fixed with steel screws complete all as specified and directed. |
| 42 | S & F Aluminium tower bolts, 150 mm long and fixed with steel screws complete all as specified & directed. |
| 43 | S & F Sliding door bolts of mild steel, 300mm long, stove enameled black with bright bolt not less than 12mm dia with & including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed. |
| 44 | S&F Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and directed. |
| 45 | S&F in repair 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed. |
| 46 | S&F150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed. |
| 47 | S&F 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified and directed. |
| 48 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 49 | S & F Plain sheet glass 3mm thick, ordinary quality and glazing, fixed with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as Specified and Directed. |
| 50 | S&F Mild steel curtain rod powder coated with fixing side brackets,end cups,rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and directed. |
| 51 | Demolition of un reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 52 | Demolition of cement concreteof any description and in any position in roofs/ floors/ Beams/ Chajja etc not otherwise specially provide for any thickness complete all as Specified and Directed. |
| 53 | M & L for pcc (1:3:6) type C2 (20mm graded stone aggregate) 50mm thick as in plinth protection including joints and the same filled with bitumen mastic (01 Part of bitumen and 03 Part of sand) complete all as specified and as directed. |
| 54 | M&L 25 mm thick cement concrete (1:2:4) type B-1 using (20 mm gradedcrushed stone aggregate) as in sub base of flooring, surface finished rough to receive floor topping complete all as specified and directed. |
| 55 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid bedded , dry and pointed etc, complete all as specified and directed. |
| 56 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. |
| 57 | M & L sand filling under floors or in foundations including watering and consolidationcomplete all as directed by Engineer-in-charge . |
| 58 | Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor topping, 75 mm thick, complete all as specified and directed. |
| 59 | M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement andpigment over sand cushioning complete all as specified and directed.Note :- The colour of tiles Red/Yellow approve by Engr -in -charge. |
| 60 | M & L sand filling under floors or in foundations including watering and consolidationcomplete all as directed by Engieer-in-charge . |
| 61 | Dismantling floor hearth or wall/stone tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 62 | M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified and directed. |
| 63 | M & L for joint less coloured Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cm(1:4), complete all as specified and directed. |
| 64 | M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular), primium qualityon vertical surfaces such as in skirting/ dado etc area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and directed. |
| 65 | Glazeded ceramic coloured (colour & shade as approved) tile 350x250x6 to 7 mm/450x300x6to7mm thick on vertical surface on walls orsuch as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified and directed. |
| 66 | Demolition of Stone slabs and tiles of any description or thickness in floors, apronslaid ,beded and pointed in any morter complete all as specified and directed. |
| 67 | M&L for Machine cut kota stone slab 18 to 20 mm thick as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry over& including screed bed of 20 mm thick in cement mortar (1:6) and pointed incement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and directed. |
| 68 | M&L for Machine cut kota stone slab 20-25 mm thick as in skirting,dado of length not less than 500 mm each unit, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed incement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and directed. |
| 69 | M&L for Granite(holes for gas pipe) tiles18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick plaster as in back coat CM 1:4complete including making circular gas pipe hole, moulding at corners and polishing type all as specified and directed. |
| 70 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed. |
| 71 | All as per item No 70 here-in-before but 20 mm bore tubing, complete all as specified and directed. |
| 72 | M&L for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixedto walls and celling or laid in floor, complete all as specified and directed. |
| 73 | All as per item No 72 here-in-before but 20 mm bore tubing, complete all as specified and directed. |
| 74 | Fixing only, after cleaning old steel water tubing, 15 mm bore and connections in new or old position using new fittings complete all as specified and directed. (pipes obtained from item 70 to be reused). |
| 75 | All as per item No 74 here-in-before but 20 mm bore (pipes obtained from item 71 to be reused), complete all as specified and directed. |
| 76 | S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 77 | S & F in repair Bib tap ofcast copper alloy chromium plated, 15mm bore,with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as Specified and Directed. |
| 78 | S&F in repair stop valves, fancy type, CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed, complete all as specified and directed. |
| 79 | S&F in repair piller taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed, complete all as specified and directed. |
| 80 | S&F in repair stop valves/angle cock, fancy type cast copper alloy,screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 81 | S & F CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs complete all as Specified and Directed. |
| 82 | S & F in repair PVC waste pipe of 32 mm dia for Wash Hand basin/Urinals etc complete all as specified & directed. |
| 83 | S & F PVC connection 15 mm size PTMT nuts of length 450 mm fixed all as per speified complete all as Specified and Directed. |
| 84 | S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipeand including dismantaling all as specified in SSR Part-Icomplete all as specified & directed. |
| 85 | Supply & Fix in repairs Squatting pan orrissa pattern vitreous china white of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore sand cast cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints etc complete all as Specified and Directed. |
| 86 | S & F Low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories and connecting to water pipe and EWC etc and fixed in repairscomplete all as Specified and Directed. |
| 87 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers andastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 88 | S & F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as Specified and Directed. |
| 89 | S&Fin repair 125 mmchromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union, complete all as specified and directed. |
| 90 | S & F Looking mirror of selected quality beveled edge glass of size 600x450 mm and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as in repairs, complete all as Specified and Directed. |
| 91 | S&F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified and directed. |
| 92 | S & F corner glass shelves 300 mm radius 8 mm thick as per sample radius for bathroom, fixed on suitable support of brass chromium plated clips complete all as specified and directed. (Make: Prayag, Somany, Cera). |
| 93 | S&F Stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs, in repair complete all as specified and directed. |
| 94 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 95 | S&F Mild steel framed work of Fe-410-0 or Fe-310-0 (Fe-290 Gde-E-165) as in doors or gate of angle or other section with gusset plates,rails, braces etc and fixing complete all as specified and directed. |
| 96 | Taking down eaves gutter and rain water pipes any size or pattern including all fitting heads shoes bends swan - necks etc all specified and directed. |
| 97 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches, complete all as specified and directed. |
| 98 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches, complete all as specified and directed. |
| 99 | S&F 110 mm dia PVC ( rain water ) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed. |
| 100 | S&F 75mm dia PVC (SWR) bends any radius, complete all as specified and directed. |
| 101 | PVC (SWR) bend (any radius), 110mm bore, diminishing pieces or tapers (larger bore measured) jointed in cement mortar, complete all as Specified and Directed. |
| 102 | S&F 75mm dia Junction single (Single or double T) equal or unequal, complete all as specified and directed. |
| 103 | S&F 110 mm diajunction single ( Single or double T) or unequal, complete all as specified and directed. |
| 104 | M&L PVC (SWR) floortrap 75 mm, plain withPVC gratingincluding jointing with solvent cementetc., complete all as specified and directed. |
| 105 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement etc including taking down cement plaster on brick or concrete surfaces on wall/ ceilling/ stone/ block etc including racking out joint, hacking for key, scrubbing down with water etc and preparing new plastered surfaces and applying two coats of cement base paint over a coat ofalkali resistant primer on surfaces of walls with paint roller complete all as specified anddirected by Engineer-in-Charge |
| 106 | M&L for rendering 12 mm thick in CM 1:6 over brick /concrete surfaces finished even and smooth without using extra cement etc including taking down cement plaster on brick or concrete surfaces on wall/ ceilling/ stone/ block etc including racking out joint, hacking for key, scrubbing down with water etc and and preparing new plastered surfaces and applying two coats of oil bound distemper painton surfaces of walls with paint roller over 2mmwall care putty complete all as specified anddirected by Engineer-in-Charge |
| 107 | M&L for rendering 5 mm thick in CM 1:3 on ceillng, finished even and smooth etc including taking down cement plaster on brick or concrete surfaces on wall/ceilling etc including racking out joint, hacking for key, scrubbing down with water etc and preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified anddirected by Engineer-in-Charge |
| 108 | M & L for Painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as Specified and Directed. |
| 109 | S&FPTMT handle 125 mm long fixed with steel Screw complete all specified and directed. |
| 110 | S&F PTMT tower bolt , 150 mm long and fixed with steel screw completeall as specified and directed. |
| 111 | S&F in repair Water storage tanks 1000 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank complete all as Specified and Directed. |
| 112 | S & F Ball valve of PVC, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as Specified and Directed. |
| 113 | S & F 15mm bore GI tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases, pinning in making good facing where required and pointing in cement mortar 1:3 to ends or edges for concealed water tubing used in brick wall and incl taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as Specified and Directed. |
| 114 | All as per item above 113 herein before but 20 mm bore tubing complete all as Specified and Directed. |
| 115 | Supply & Fix in repairs Urinal, bowl type or half stall pattern, vitreous china (White), of size 465 x 365 x 265 mm incl connections to flush pipe with grating, union for discharge pipe, spreader & 32 mm dia PVC waste pipe upto floor trap complete all as Specified and Directed. |
| 116 | S & F in repair Vitreous China wash down water closet pan (pedestral pattern), White (excluding fixing bolts, flushing cistern and flush pipe), with plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as Specified and Directed. |
| 117 | S & F Shelf of PTMT fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 300 gms) complete all as Specified and Directed. |
| 118 | S & F Towel rail 450 mm long of PTMT fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 170 gms)complete all as Specified and Directed. |
| 119 | Dismantling CI pipe/PVC pipe alongwith fittings of 110mm dia, below or above ground level, jointed in cement mortar and taking outcomplete all as Specified and Directed. |
| 120 | PVC (SWR), floor trap,110mm bore, Plain with grating including jointing with solvent cement complete all as Specified and Directed. |
| 121 | M&LBrick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls complete all as Specified and Directed. |
| 122 | M & L rendering 10mm plaster in CM(1:3) finished even and smooth with using extra cement on vertical surfaceof sunken portion wall and floor with water proofing compound (in case of re placement of bottom layer tile) complete all as specified and directed. (WPC shall be measured separately) |
| 123 | S&F GI pipes 40 mm bore including fixing to walls as in spouts of sunken portion complete all as Specified and Directed. |
| 124 | M & L Cement concrete (1:5:10),type E-2 using 40mm graded stone aggregate in foundation filling or above floor and mass concrete complete all as specified and directed. |
| 125 | S & F as in repair PTMT shower Rose swivel type 25 mm sizepipe(minimum wt 40 gram) complete all as specified and directed. |
| 126 | S&F providing precast cement concrete louvres and jalies type B0 1:2:4 (12.5 mm graded aggregate) set in 1:4 mortar, 40mm thick(measured solid), including all mouldings but excluding frame complete all as Specified and Directed. |
| 127 | M & Lfor applying two coat of Cement base paintover old surface of walls including preparation of surfaces complete all as Specified and Directed. |
| 128 | M & L for applying two coat of white wash over old surface of walls including preparation of surfaces complete all as specified & directed. |
| 129 | M&L for reinforcement cement concrete B-1, 1:2:4 (20 mm gradedaggregate)Nominal mix for Slabs supported on walls,beams and lintle in floors,roofs, landings, balconies,canopies, deck slabs,parapet,chajjas andthe like,( upto 3rd floor) complete all as specified and directed. |
| 130 | Use and waste of Formwork to soffits of suspended slabson flat ,such as roof slabs, floor slabs, landings,chajjas & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat height(upto 3rd floor)complete all as specified and directed. |
| 131 | Use and waste ofFormwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls,chajaas floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide height(upto 3rd floor) complete all as specified and directed. |
| 132 | M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as specified and directed. |
| 133 | As per item No 132 but 6mm to 8mm dia complete all as specified and directed. |
| 134 | M & L for Preparation of old treated steel surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as Specified and Directed. |
| 135 | M & L for Preparation of old treated wooden surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as Specified and Directed. |
| 136 | Hacking out old broken glass n. exe 1.5 SQM (any thickness size, quality of description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as Specified and Directed. |
| 137 | M&L for Cement base paint in two coats over a coat of cement wash on newly plastered surfaces of walls including preparation of surfaces complete all as specified & directed. |
| 138 | M & L for White wash in three coats on newly plastered surfaces of wall including preparation of surfaces complete all as specified & directed. |
| 139 | M & L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in bed blocks of hold fasts, coping etc including necessary form work complete all as specified & directed. |
| 140 | S & FPressed handle of mild steel, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified & directed. |
| 141 | S & F Barrel tower bolts of mild steel, stove enameled black, with bright bolt, 200 mm long and fixed with steel screws complete all as specified & directed. |
| 142 | S & F Mild steel, fixed type ventilaters with side hunge shutters including projecting type hinges with steel handle and steel peg stay, complete with sash bars, dovetailed or welded as complete all as specified & directed. |
| 143 | S & F butt hinges, 100 mm long of mild steel, medium weight, cold rolled complete all as specified & directed. |
| 144 | S&F in repair gunmetal gate valve of 15 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified & directed. |
| 145 | S & F Towel rail 450 mm long of Brass Chromium plated 20 mm dia fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 170 gms) complete all as specified & directed. |
| 146 | S & F Waste fittings/ Coupling 32 mm bore, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair complete all as specified and directed. |
| 147 | Demolition of cement concrete in any position and pavings exc 15cm thickness complete all as specified & directed. |
| 148 | S&F PVC (SWR) pipes 75mm bore including fixing to walls as in spouts of sunken portion complete all as specified & directed. |
| 149 | Supply only integral water proofing compound complete all as specified & directed. |
| 150 | Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified & directed. |
| 151 | Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB\"s (single phase or three phase) of any capacity all as specified and directed. |
| 152 | Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified |
| 153 | M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copperconductor, multi stranded of size 1.5 sqmm, single core,in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends, reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks (for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC FRLS insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Pointcontrolled by one single pole one way switch. |
| 154 | All as per item No. 153 here-in-before but One 5 amps socket outlet independentcontrolled by one single pole 5 Amp switch, complete all as specified & directed. |
| 155 | All as per item No. 153 here-in-before but One socket outlet on the sameboard controlled by one single pole one way switch, complete all as specified & directed. |
| 156 | All as per item No. 153 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC FRLS insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC FRLS insulated, unsheathed,stranded copper conductor cable, complete all as specified & directed. |
| 157 | All as per item No. 153 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC FRLS insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC FRLS insulated, unsheathed,stranded copper conductor cable, complete all as specified & directed. |
| 158 | S&F 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 159 | S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 160 | S&F 6 Amps Socket 2 in 1, Urea backpiece (IP20), white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 161 | S&F Socket outlet, UNI, 2 in one10 Amps & 20 Amps, white in colour, duly ISI marked, complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 162 | S&F Bell push flush, type 6 amp single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 163 | S&F Door Bell, AC, 230 volts, single pole, white in colour, duly ISI marked, complete all as specified & directed. Make- Anchor/ Cona/ Plaza. |
| 164 | S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals dulyISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 165 | S&F batten holder, 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza. |
| 166 | S&F rotary stepped type electronic fan regulator compatible for BLDC for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked, complete all as specified & directed.Make- Anchor/ Cona/ Plaza. |
| 167 | Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified & directed. |
| 168 | S&F LED bulb of 9/10 watts B-22 CDL 3 star 6500K, complete all as specified & directed. |
| 169 | Supply and fixing LED street light fitting toughened glass 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp incl suitable size MS/ GI bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. |
| 170 | S&F Factory made three phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 4 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail suitable for use on 240/415V, 50Hz supply, VTPN DB, partly immersed in wall, including of MCCB 4 pole adjustable thermal & fixed magnetic type 100 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified & directed. |
| 171 | S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified & directed. |
| 172 | S&F MCB SPN, 40A - 63Amps, 240 volts, \"C\" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning, complete all as specified & directed. |
| 173 | S&F MCB SP, 6A-32 Amps, 240 volts, \"B\" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning, complete all as specified & directed. |
| 174 | Supply & Fixing in repair MCB single pole (SPN) 240 volts, 40 Amps, 10 KA \"B\" Series, complete all as specified & directed. |
| 175 | Supply & FixingMCB, Single Pole and neutral 240 V, 32 Amps 10 KA \"B\" series complete all as specified & directed. |
| 176 | S&F exhaust fan heavy duty copper winding with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified & directed. |
| 177 | S&F exhaust fan PVC duty with louvers complete of sweep size 250mm, 1200 RPM, single phase, with bolts, nuts and washers, including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified & directed. |
| 178 | Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed. |
| 179 | M & L for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC FRLS insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC FRLS insulated copper conductor single core, one run of PVC conduit shall be measured as single run) |
| 180 | Earthing complete with galvanized steel plate elecrode of size60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate,excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009), complete all as specified & directed. |
| 181 | S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, flat or circular, PVCFRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified & directed. |
| 182 | Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan, for laying of cable and getting out, complete all as specified & directed. |
| 183 | M&L Dry and clean fine sand for cable cushioningto underground cable protection, complete all as specified & directed. (Excavation and earth work measuredseparately). Note- Punned down thickness shall be measured. |
| 184 | S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable, complete all as specified & directed. (Excavation and earth work measured separately. |
| 185 | Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified & directed. |
| 186 | Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point, complete all as specified & directed. |
| 187 | S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc including taking down, complete all as specified & directed. |
| 188 | Supply, fixing connecting and testing energy efficient (BEE 5 Star rated) electricwater heater vertical storage type of 25 Ltrs capacity with stainless Steel inner tank, brass assembly, pressure release valve, heating element 1500/2000 W including all other accessories with high quality external finishes single phase with working Voltage 240 volts, 50 Hz, ISI marked complete all as specified and directed. Note: The cost of fixing of geysers includingNRV, stud/ nuts/fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface is deemed to be included in the unit rate quoted. |
| 189 | Supply and fix Galvanised iron steel tubing medium grade of size 20mm complete including cutting of existing pipe line for jointing with all fittings such as bend, tee, reducer, elbow and union of require size including fastners, bolts, washers, laid on wall and making good to the disturbed surface after making hole, complete all as specified and directed. |
| 190 | Supply and fix Galvanised iron steel tubing medium grade of size 15mm complete with all fittings such as bend, tee, reducer, elbow and union of require size including fastners, bolts, washers, laid on wall and making good to the disturbed surface after making hole, complete all as specified and directed. |
| 191 | Supbly and fixing PVC connection 15mm size with brass nuts of length 600 mm forHot/cold water supply complete all as specified and directed. |
| 192 | Supply and fixng Sheet metal enclosure with socket plug Top and MCBs single pole and neutral enclosure with a two pin and eath plug socket complete with one single pole MCB of 20 Amp \"B Series capacity including fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface complete all as specified and directed. |
| 193 | Supply and fixing sub main wiring two Run of 4 sqmm single core PVC FRLS insulated, unsheathed multistranded copper conductor cable 1100 voll grade, drawn through and including PVC conduit medium duty including accessaries of 25mm size and fixed with PVC sadles and cadmium plated steel screws to the surfaces of the wall/ceiling including one run of 4 sqmm single core PVC FRLS insulated unsheathed copper eath continulty conductor complete all as specified and as directed. Notes:1.Two runs of single core cable with one run of earth continuty conducto including PVC conduit and accessories shall be measured and paid as one unit.2. The rate quotes against this item is deemed to be inclusive of making good the distrubed sufaces to match with the existing surfaces. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
