|
| 1 | Taking down cement or cement lime plaster on wall/ceiling/roof on brick/concrete/stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. Note: Demolished material through out of MoD Land rate included above item. |
| 2 | M&L for 12 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for 15mm thickrendering in cement mortar 1:4 on brick work, concrete/ stone masonry surfaces, mixed with water proofing compound finished even and smooth without using extra cementcomplete all as specified and directed. Note : (i) The quoted rate is inclusive of necessary scaffolding works. (ii) WPC shall be measured and paid under relevant item. |
| 4 | M&L for 5mm thick rendering in CM (1:3) on fair faces of brick work or concrete surfaces of ceiling/chajja/fascia etc finished even and smoth without using extre cement complete all as specified and directed. |
| 5 | M&L washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 15 mm cement 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in pannels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete all as specified ( Payment for providing grooves shall be made separately). |
| 6 | Forming groove of uniform size 15 mm wide and 15 mm deep in top layer of washedstone grit plaster as per approved pattern using wooden battens nailed to the under layer including removal of wooden battens , repair to the edges of panels and finishing the grooves etc complete all as specified and directed. |
| 7 | Supply only liquid water proofing compound @ of 200ml per bag of cement. |
| 8 | M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper, over and incl a layer of3mm thick wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 9 | M&L for preparation of new plastered surfaces of wall and applyingtwo coats of cement base paint over a coat of primer complete all as specified and directed. |
| 10 | M&L for preparation of new plastered surfaces of ceiling and applyingthree coats of white wash complete all as specified and directed. |
| 11 | Disconnecting existing water tanks (capacity exc 250 & n exc 500 ltrs), setting aside (or loweringif required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc measured separately) and writing Date of Cleaning including old or new fitting tanks complete all as specified and as directed. |
| 12 | Cleaning and removing all scale and dirt etc. from tanks (capacity of tank exc 250 ltrs but n.exc 500 ltrs) and from mouths of circulating pipes etc using approved drinking water tank cleaning powder complete all as specified and as directed. |
| 13 | Dismantling of water tanks exc 250 ltr and n.exc 500 ltr capacity and removing from site complete all as specified and as directed. |
| 14 | S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and as directed. |
| 15 | S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20mm dia pipe. (Minimum weight 15mm-142gms, 20mm-210gms, 25mm-455gms, 40mm-690gms) complete all as specified and directed. |
| 16 | S&F for in repair gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed. |
| 17 | Taking up or down 20 mm dia steel tubing /PPR pipe connections etc, including cleaning for Refixing orremoval to store complete all as specified and directed. |
| 18 | Taking up or down 25/ 32 mm dia steel tubing /PPR pipe connections etc, including cleaning for Refixing orremoval to store complete all as specified and directed. |
| 19 | Supply and laying 20mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and directed. |
| 20 | Supply and laying 25mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and directed. |
| 21 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position including all fittings, heads, shoes, bend, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 22 | S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. Note : All around mouth area of pipes in roof to be applied with bitumen felt to make leak proof water seal rain water discharge, bitumen felt shall be measured and paid seperately and rain water pipe should be fitted while concrete in green and no drilling or breaking of concrete in roof not allowed to avoid puncturing of roof treatement and make leak proof. |
| 23 | S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. Note : All around mouth area of pipes in roof to be applied with bitumen felt to make leak proof water seal rain water discharge, bitumen felt shall be measured and paid seperately and rain water pipe should be fitted while concrete in green and no drilling or breaking of concrete in roof not allowed to avoid puncturing of roof treatement and make leak proof. |
| 24 | S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 25 | S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 26 | S&F for 110mm dia PVC (SWR) bends any radious complete all as specified and directed. |
| 27 | S&F for 75mm dia PVC (SWR) bends any radious complete all as specified and directed. |
| 28 | S&F Stack clamps made out of50 mm by 5 mm flat iron and 16 mm dia around iron stays including boltand nuts for securingends of stays to walls or roofs, bore pipe 100 mm dia pipe complete all as directed. |
| 29 | S&F Stack clamps made out of50 mm by 5 mm flat iron and 16 mm dia around iron stays including boltand nuts for securingends of stays to walls or roofs, bore pipe 75 mm dia pipe complete all as directed. |
| 30 | Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial complete all as specified and directed. Note:Demolition material throughout MOD Land rate include above item |
| 31 | Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing), removing the rubbish off the premises of MOD land complete all as specified & directed. Note: Demolished material through out of MoD Land rate included above item. |
| 32 | M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 in sunken floor surfaces complete all as specified & directed. |
| 33 | M&L for applying two coats of two component flexible acrylic polymers modified cement based waterproof coating in sunken floors and wall joints having good compressive strength and shrikage resistance etc as per manufacturer instructions in product brouchure etc complete all as specified & directed. |
| 34 | M&L for 75mm thick PCC (1:2:4) type B1 using (20mm graded stone aggregate) in floors completeall as specified and directed. |
| 35 | M&L for 20 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface and mixed with WPC finished even and smooth without using extra cement complete all as specified & directed. |
| 36 | M&L for PCC (1:5:10) type E2 (with using 40mm graded brick aggregate) as in filling of sunken floors complete all as specified and directed. |
| 37 | S&F in repairs of 100mm dia of outlet PVC (SWR) floor trap plain with mild steel CP grating (100mm including jointing with solvent cement, complete all as specified and directed. |
| 38 | S&F for as in repairviterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jetand plastic water closet seat cover closed pattern with flat bottomand cover and mild steel hinges and complete all as specified and directed. |
| 39 | S&F in repairs for vitreous china squatting pan, orissa pattern size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps and connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed. |
| 40 | S&F in repairs flush pipe fixed to pedestal pan, incl all joints, of polythylene of low or high denisity or PVC 32 mm dia for low level cistern complete all specified and directed. |
| 41 | S&F in repairs PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle and flushing pipe complete all as specfied and directed. |
| 42 | S&F in repairs 15mm dia angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe fixed and complete all as specified and directed. |
| 43 | S&F in repair for15mm dia PVC connection with PTMT nuts of length 600 mm, heavy duty, steel wire mesh coated complete all as specified and directed. |
| 44 | S&F for in repairs for 15mm, bib tapFancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified and directed. |
| 45 | M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thickon vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4)completeall as specified and directed. |
| 46 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangle) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over and incl 15mm screed bed in CM 1:4in floors complete all as specified and directed. |
| 47 | Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5 m above the starting point with soil complete all as specified and directed. |
| 48 | Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and directed. |
| 49 | S&F for 18 mm thickPVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesivecomplete all as specified and directed. |
| 50 | S&F for 12 mm thickPVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesivecomplete all as specified and directed. |
| 51 | S&F for aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and directed. |
| 52 | S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed. |
| 53 | S&F for extruded aluminium alloy handle of 125 mm size fabricatedtype, anodised & complete all as specified and directed. |
| 54 | S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified and directed. |
| 55 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 56 | S&F for in repairCurtain rod stainless steel decorative type 25 mm diaincluding fixing bracket and end knobs complete all as specified. |
| 57 | S&Fin repairs for wall mixer with Three in one pattern in of brass CP, complete all as specified and directed. |
| 58 | S&F for in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. |
| 59 | S&F in repair single level Sink Mixer with Swinging Spout on Uper Side (wall Mounted Model) with connecting Legs & Wall Flangers for 15mm bore iron pipe complete all as specified and directed. |
