|
| 1 | M&L for Excavation of pits size 30 cm x 30 cm x 30 cm in loose soil and filling the pit with mixer of river sand and approved earth in the proportion of 1:3 mixed with 2 Kg of cow dung powder 100 gms of born meat and 10 gms of insectide furadan complete all as specified and directed. |
| 2 | All as per item No 1 here in before but pit size 60 cm x 60 cm x 60 cm |
| 3 | Supplying and planting Native tree Cocos Nucifera (Coconut)/Cycas annaikalensis (Palm family)/ Arecsa Catechu (Palm family)/ Caryota Urens (palm family)/ Saraca asocasapling having 45 cm height and shall have a minimum height of 65 cm after 6 months complete all as specified and directed. |
| 4 | Supplying and planting fruit/vegitable plant Mangifera indica (mango)/ Brown coccinia /Artocarpus Heterophyllus (Jack fruit)sapling having 75 cm height and shall have a minimum 95 cm after 6 months complete all as specified and directed. |
| 5 | Supplying and planting shaded tree (Tectona Grandis (Teak) / Anacardium occidentale (Cashew) / Syzygium Cumini (Jamun) sapling paving 75 cm height and shall have a minimum 95 cm after 6 months complete all as specified and directed. |
| 6 | Supplying and planting flower plants (Hibiscus and Jasmine) sapling having 10 cm minimum height and shall have a minimum 25 cm to 30 cm height complete all as specified and directed. |
| 7 | Supply and planting mexican grass including provision ofmannureall as specied anddirected. |
| 8 | Excavation in trenches not exceeding 1.5 mtrs. wide and not exceeding 1.5 Mtrs. in depth in trenches and getting out in soft soil complete all as specified and directed. |
| 9 | Returning, filling in including spreading and levelling watering and well ramming in layers not exceeding 25 cm with soil obtain from excavation complete all as specified and directed. |
| 10 | Removing the excavation soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 11 | Supplying and laying 3-layer PP-R (Polyproplene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polyproplene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.a. 50mm outer dia |
| 12 | Supply and fix Sluice Valve Class PN 1.6 of size 50 mm, ISI marked as per IS: 14846complete with and including flanges, leather washers, rubber gasket, bolts, nuts all as specified and directed. |
| 13 | Supply and fix Non return valve conforming to IS 5312, 50 mm dia complete all as specified and directed. |
| 14 | Supply and fix T-type screen filter, 50 mm size suitable to filters all dirt,algae, impurites, cartdrige made of Non-corrosive steel complete all as specified and directed. |
| 15 | M & L Valve chamber of internal size 0.90m X 0.90m X 0.90m (internal dimentions) including excavation of earth work in any type of soil, 150mm thick PCC in 1:4:8 type D2 foundation , brick work in CM 1:6, 15 mm thick rendering in CM 1:4 to both internal and external surfaces upto 150mm depth below GL, PCC 1:3:6 type C1 as in coping, cover with two Nos of hinges and one No. handle made out of MS round bar 10mm dia with necessary locking arrangement including painting to the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drg and as specified. Note:- The above itemincludes all necessaey earthwork and relevant connected items. |
| 16 | Supply, installing, testing and commissioning of electrically driven horizontal Centrifugal Pump set as per specification, motor TEFC type, 2880 rpm, 415 V, 50 Hz, 3 phase, class \"F\" insulation, 2HP, IP 55 protection, starting on suitable Star Delta starter. The pump shall be horizontal, end suction, top discharge. The pump shall have cast iron casing, cast iron/bronze impeller (as per manufacturer), carbon steel shaft with common base frame (fabricated mild steel channel frame or cast iron type) placed on RCC (1:2:4) including foundation, bolts, nuts etc. complete with antivibrator pad as required capable of discharging not less than 300 LPM at 30 mtr head inclusive of suitable rated three phase starter as recommented by the manufacturer, PVC insulated copper cable connection from starter to the motor terminals all as specified and directed.(01 No. Working + 01 No. Stand By) Make:- Kirloskar Brothers/Crompton or equaivalent. |
| 17 | M & L Earthing complete with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanised iron strip 25×4mm size by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No.3 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1(using 20mm graded aggregates) with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completion complete all as specified and as directed. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh, 40mm dia light grade GI protection pipe for earth lead etc., complete. |
| 18 | Supply and laying Drip irrigation inline pipe line size 20mm used in Drip irrigation for watering plants made from high quality UV resistant linear Low density polyethylene (LLDPE) material including all accessories take off connector, straight connector, end cap etc. complete all as specified and directed. |
| 19 | Supply and fixing pressure regulating valve to ensure optimal performance and water efficiency having pressure rating up to 100 psi and regulation 15 to 100 psi and flow rate range up to 150 gpm complete all as specified and directed. |
