|
| 1 | M&L for treatment of soil under existing floors using emulison & one liter per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors. |
| 2 | M&L for providing and injecting chemical emulsion for post constructional Antitermite Treatment along external wall where the aporn is not provided using chemical emulsion at the rate of 7.5 liters per Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete. |
| 3 | Taking down chowkhat or framesexc 1.5 sqm but n.exc 4.00 sqm each and removing to or from store complete all as specified and directed by Engineer-in-Charge. |
| 4 | Taking down chowkhat or framesexc 1.5 sqm but n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) and removing to or from store complete all as specified and directed by Engineer-in-Charge. |
| 5 | Taking down chowkhat or framesn. exc 1.5 sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed by Engineer-in-Charge. |
| 6 | Taking down shutters of any descriptionexc 1 Sqm but n exc 2 Sqm each and removing to or from store complete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking down shutters of any descriptionn.exc 1 Sqm each and removing to or from store complete all as specified and directed by Engineer-in-Charge. |
| 8 | Taking down shutters of any description exc 2 sqm each and removing to or from store complete all as specified and directed by Engineer-in-Charge. |
| 9 | Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete all as specified and directed by Engineer-in-Charge. |
| 10 | Refixing of shutter of any description n exc 1 sqm in same opening complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply & fix pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, butthinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply & fix pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, butthinges, lock strike plate, etc complete, size of frame 125x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply & fix in repair 2nd class hard wood factory made plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P commerical ply or 12mm veneered practicle board with commercial veneering on both faces, size of rail and stile as per IS: 1003(Part-I), kin Seasoned and chemically pressure treated all as per SSR complete all as directed. |
| 14 | Supply & fix in repair 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters,open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) including fixing of stainless steel wire cloth 0.36 mm nominal of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples as in wooden wiremesh shutter complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supply and fix solid PVC double door frame of size 50mm x 95 mm with a wall thickness of 5 mm, made by jointing 3 Nos, hear bent PVC sheet \"C\" channel of 5 mm foam sheet of sizes 35mm x 30mm x 25mm and 40mm x 35 mm x 40mm& 25 mm x 30mm x 35mm using solvent cement.The two side \"C\" channel shall be reinforced with 19mm x 19mm MS square tusbe of 19mm gauge.All the three \"C\" channel shall be fixed to flat baseof 5 mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and jointed by inserting 4 Nos.150mm long brackets of 15 mm x 15mm MS suare tusbe inside the 19mm x 19mm square tubes.The door frame shall be fixed to the wall using 65/100 mm long MS screws throguh the frameby using PVC fasteners.A minimum of 8 Nos of screws to be sprovide for each vertical member & minimum 4 nos for horizontal member etc complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply and fix solid PVC single door frame of size 50mm x 47 mm with a wall thickness of 5 mm, made by jointing 3 Nos, hear bent PVC sheet \"C\" channel of 5 mm foam sheet of sizes 35mm x 30mm x 25mm and 40mm x 35 mm x 40mm& 25 mm x 30mm x 35mm using solvent cement.The two side \"C\" channel shall be reinforced with 19mm x 19mm MS square tusbe of 19mm gauge.All the three \"C\" channel shall be fixed to flat baseof 5 mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and jointed by inserting 4 Nos.150mm long brackets of 15 mm x 15mm MS suare tusbe inside the 19mm x 19mm square tubes.The door frame shall be fixed to the wall using 65/100 mm long MS screws throguh the frameby using PVC fasteners.A minimum of 8 Nos of screws to be sprovide for each vertical member & minimum 4 nos for horizontal member etc complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply and fix 35mm thick factory made moulded door shutter consisting of solid core single leaf flush door of 30mm thichness, lipped with 15mm (5mm x 30 thick x 30mm width on one stiles and top reails & bottom rails.The inner panel laminated with 2mmthick termite proof, water proof and fire resistant moulded PVC sheet with 2 raised panel design in different plain and 2mm plain coloured PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and fix 30mm thick factory made wiremesh solid PVC door shutter consisting of frame made out of 19 gauge thickness & size of 19 mm x 19mm of style and 15mm x 15mm for top, lock and bottom rails.And in addition one veritical member throughout in between styies.MS frame shall be covered with 5mm thick heat moulded PVC \"C\" channel of appropriate sixe 15mm wide PVC sheet beading is to be stuck internally in the back side of stiles and ralls of door with solvent cment adhesive.So that the wiremesh can be fixed properly.The wiremesh solid shutter have PVC sheet to match the sutter of PVC moulded shutter etc including fixing of stainless steel wire cloth 0.36 mm nominal of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples as in wooden wiremesh shutter complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply & fix PVC door PDS-01 comprising of shutter andframe all as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGIDE FOAM) , door frame/ chowkhats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including necessary hardeware fittings/Iron mongre complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material & labour foraluminium window with double side hungshutter forglazing and gauging and frame with one or more rebates made out of anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminiumbeading screws, type B20 100mm long suitable handle, 75mm long tower bolt and anodised aluminum fittings such asstay, 75mm long Butt hinges glazing with 5 mm thick tinted sheet glass fixed with Solar control film 25 micron reflective type (gareware sun control or equivalent) and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) complete all as specified and directed by Engineer-in-Charge.(Tint of glass shall be approved by GE)Note :- (i) Aluminium grill fixed under aboveitem shall be measured and paid separately . |
| 21 | Supply & fixanodized aluminiumventilator fixedtype with frames aluminium section size 63X38X1.20mm thickincluding fly proofing ventilator fixing with standard rubber gasket locking arrangements aluminium beadings & joining cleats, suitable butt hinges, handle and tower bolts for fixing complete all as specified and 5.5 mm thick tinted glass with Solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply & fix anodized aluminium grill (diamond shape of approx size 100x100mm) made out of aluminium\"Y\" sectionas approved by Engr-in-Charge for window/ ventilators etc complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply & fix aluminium fully glazed door with shutter and frame with one or more rebates made out of anodised aluminium sections, shutters fixed with floor springhinge (ISI marked) including jointing cleats for fixing etc complete all as specified with panel of 6 mm thick tinted glass (tint of glass as approved by GE), clips, rubber packing, anodised aluminium snap beading, screws and aluminium fittings all as shown on drg No. CEAA/TD/132 sheet 1/2 and 2/2 except fixed glazing (FG) complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply & fix aluminium anodised approvedmakedoor shutter in single or double leaf with frames size 83 x 38 x 1.5 mm thick including 5.5 mm thick tinted, frosted,glass in half portion and 12mm thick prelaminated particle board exterior grade, one side with decorative choice and other side balancing(both side white laminated) ,standard rubber gasket, powder coated aluminium beadings, disc type handles two Nos, , double action floor springfor each shutters and one mortice lock and joining cleat etc complete all as specified and directed by Engineer-in-Charge.Note:- Floor door spring & mortice lock shall be measured and paid separately under repesctive items. |
| 25 | Supply & fix in repair glass door 12mm thick clear tinted toughned glass incl diamond polish complete with six holes and two patch cut out incl frosting of glass all as per direction of EIC through CNC machine incl ISI marked floor door spring for each shutter incl top patch bottom patch and 30 cm long stainless steel handle set and central stainless steel lock complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply & fix mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply & fix 75 mm size butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & fix butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply & fix 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply & fix Aluminium handles, cast type, anodized 150mm size ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply & fix aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long complete all as specified and as directed by Engineer in Charge. |
| 32 | Supply and fix of 100mm size (overall length of cover plate) floor door stopper of aluminium body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply & fixmild steel, 300 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 34 | Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames/aluminium frame glazed with oil putty or fixed with rubber beads complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply & fix 5.5mm thick tinted glass fixed with solar control film 25 micron reflective type as approved by GE, fixed to existing aluminium door/ windows including provn of rubber beading, cleats, clips and lockingarrangements exc. 0.50 sqm each pane complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply & fix in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples as in Steel windows andsteel ventilators including removing the rusted wire mesh fixed with nuts and bolts and fixing the wire mesh cloth at any height complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply & fix Hasp and staple, mild steel, safetytype, stove enameled black, including bolt to hinge plate and fixed with screws of 125mm size complete all as specified and directed by Engineer-in-charge. |
| 38 | Preaparing surfaces of new wood and wood based materials of any description and girth, not otherwiswe described and treated with two coats of synthetic enamel paint over a coat of primer. |
| 39 | Material & labour for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 40 | Material & labour for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of scaled paint and applying onecoats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 41 | Material & labour for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girthand applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge |
| 42 | Supply & fix in repairs double actionfloor door springhydraulically regulated made up of minimum 1.25 mm th aluminium alloy sheet foudation box main body with stainless steel cover governing pivot made up of brass other parts made up mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply & fix in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified and directed by Engineer-in-Charge. |
| 44 | Running welding in repair, thickness of metal to be welded not exceeding 6mm complete all as specified and directed by Engineer-in-Charge. |
| 45 | Welding in repair not exc 2.5cm in length and thickness of metal to be welded not exceeding 6mm thick complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply & fix in reapir SS handle for glass door complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply & fix in reapir Glass handle for glass door complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply & fix framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, frmaed guard bars, barred iron door, ladders, framed baulster, walk way, railings, frmework of water tanks and similar work confirming to Fe 290 Gde-E-165. |
