|
| 1 | S&F in repairs factory made PVC cupboards frame of the size 75 mm x 40 mm with a wall thicknesss of 5 mm made out of extruded 5mm thick plain/prelam PVC sheet of density 600kg/cbm, having bottom width of 50mm and thickness of 10 mm. All four frame lengths reinforced with 19 mm x 19mm M.S.square tubes of 19 quage thickness throughout the frame and mitre cut at two corners adjointed with 2 nos of 15mm long brackets of 15 mm x 15 mm M.S. square tubes. the door frame shall be fixed to the wall using 8/100 long MS screw through the frame by using PVC fastners. A minimum of 4 nos of screws to be provided for each vertical members and minimum of 2 nos of screw to be provided horizontal members etc. complete as per direction of Engr-in-charge, manufacturer\"s specification and drawing. |
| 2 | S&F in repairfactory made PVC cupboards flush type shutter of 30 mm thick consisting of frame made out M S tubes of 19 guage thickness and size 19mm x 19 mm for stiles and rails. The inside panels shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both sides of inside panels including necessary item to fix the shutters to frame such as 100 mm stainless steel hinges (06 Nos Each Shutter), 100 mm long handles(02Nos Each Shutter)150mm long barrel tower (02Nos Each Shutter), made of anodised aluminium and magnetic ball catch(01 Nos Each Shutter), for each pair of shutters. all four edges of the panels to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2nos PVC foam sheet of 5mm thickness using PVC solvent cement adhesive) complete as per direction of Engr-in- charge |
| 3 | S&Fin repair factory made PVC shelf/partition of required size consisting of panel of Min 20 mm thickWPC Plain/Color and for supporting the hold of shelf/Partition and shall provided 3 gdges in size 18 mmx18 mm as per required lengh. The front side of the edge visible in the front of the shelf/partition to be edge lipped by 18 mmwidthx1 mm thick PVC sheet using solvent cement etc reqired length. complete all as specified and directed |
| 4 | S&Faluminium anodised 125 mm Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed in repair with screws complete all as specified and directed. |
| 5 | S&F in replacementPVC kitchen frame of section 18x75mm made out of 18mm thick PVC Ply sheet of pleasing colours, print and prelam finishes one side as approved and frame shall be fixed with & including plastic fasteners and 75mm long steel screws inside by using drilling machine complete all as specified and directed. |
| 6 | S&F in replacement PVC kitchen shutter made out of 18mm thick PVC Ply sheet of pleasing colours, print and prelam finishes one side as approved and kitchen shutters shall be fixed to the PVC kitchen frame with & including auto hinges, steel screws and modular handels complete all as specified and directed.complete all as specified and directed. |
| 7 | Demolition of brick work built in cement mortar complete all as specified |
| 8 | M & L for brick work with sub class ‘B’ brick straight or curved on plan exc 6 Mtr mean radius built in CM(1:6) |
| 9 | RemovingCementmortar or cement lime mortarr from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed. |
| 10 | All as per item no 08 above but expect bricks |
| 11 | M & L Galvalised mild steel wire netting of chicken wire mesh 0.46 mm nominal dia of wire & 10 mm mesh size all as spd fixed to walls roof etc& as directed. |
| 12 | Taking down cement plaster from brick wall , concrete surface includingracking out joints hacking for key and scrubbing down with water complete all as specified |
| 13 | M&L for 15mm thick rendering on surfaces of brick work or stone walling in CM 1:6 finishingthe surface fair & even complete all as spfd and directed. |
| 14 | M&L for 15mm thick rendering on brick work or concrete surface in CM 1:4 mixed with WPC @ 200ml per bag of cement finishingthe surface fair & even complete all as spfd and directed. Note:- WPC shall be measured and paid saperately. |
| 15 | M&L for rendering 10 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement icomplete all as specified and directed |
| 16 | Supply only integral water proofing compound |
| 17 | M&L for preparation of newlyplastered surfaces of wall and applying twocoat white wash complete all as specified and directed |
| 18 | M&L two coats of white wash on newly plastered surfaces as on ceiling including preparation of surfaces, complete all as spfd and directed. |
| 19 | M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted over & including a coat of white cement wash complete. |
| 20 | M&L for preparation of plastered new surfaces of walls and applying two coats of distemper (washable) oil emulsion painton walls complete all as specified and directed. |
| 21 | M&L for two coats of white putty or JK wall putty avg 2mm thick with smooth finish by sand papering to achieve smooth surfaces complete all as specified and directed. |
| 22 | M&L for preparationofold distempered surface of walls by brushing, scrapping down smoke soot mouldsby steel wire brush.including filling depression surfaces with puttyand applying one coat of distemper oil emulsion distemper Complete all as specified. |
| 23 | M&L for preparing ofold distempered surface of wallsby brushing, scrapping down smoke soot mouldsby steel wire brush including filling dipression surfaces with putty and applying two coats of distemper oil emulsionComplete all as specified. |
| 24 | M&L for preparing ofold distempered surface of ceiling by brushing, scrapping down smoke soot moulds by steel wire brush including filling dipression surfaces with putty and applying one coat of oil bound distemper Complete all as specified and directed. |
| 25 | M&L for preparation of old decorated surfaces of walls by brushing, scrapping down smoke soot mouldsby steel wire brush including filling dipression surfaces with putty and applying one coat of cement base paint .complete all as specified and directed. |
| 26 | M&L for preparation of old decorated surfaces of walls by brushing, scrapping down smoke soot mouldsby steel wire brush including filling dipression surfaces with putty and applying two coat of cement base paint .complete all as specified and directed. |
| 27 | M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc andapplying one coats of white wash complete all as specified and directed. |
| 28 | Cutting down existing tree any girth on roof/wall of bldgs, grubbing roots including necessary cutting and removings penetrated roots and filling holes with cement mortar 1:4 or PCC 1:2:4type B-1 making good to disturbed portion of brick work and cleaning site, complete all as specified and directed..(Note -Bldgheight is Aprrox up to 11 m, Cost of Necessary Scaffolding shall be deemed to be included in quoted rates ) |
| 29 | M&L providingPCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in bed plates coping, padding complete all as spd & directed(Roof in non accessible approx height ex. 4.00 m and n.exc. 8.00 m including demolition of old exist complete as directed by Engr in Charge ( Cost of Necessary Scaffolding shall be deemed to be included in quoted rates ) |
| 30 | M&L Cutting out cracks to \"V\" section in existing roof or terraces cleaning out wettinggroves and suppling and filling cement mortar inCM (1:3) complete .(Roof in non accessible approx height ex. 4.00 m and n.exc. 8.00 m complete as directed by Engr in Charge (Cost of Necessary Scaffolding shall be deemed to be included in quoted rates ) |
| 31 | M& L Screed bed10mm thick in CM (1:4) over roof slab mixed with water proofing compoundas per manufacturer\"s instrutionsfinished even andfaircomplete as directed by Engr in Charge.(Roof in non accessible approx height ex. 4.00 m and n.exc. 8.00 m(Cost of Necessary Scaffolding shall be deemed to be included in quoted rates)Note WPC shall be measured and paid separately |
| 32 | M&L for water proofing treatment to roof including taking down old the existing roof treatment of any type and preparation of surface by proper cleaning and applying a priming coat of bitumen primer @ 0.30 ltrs/Sqm and applying a coat of hot blown bitumen 85/25 conforming to IS-702 @ 1.20 Kg/Sqm and supply & Laying ofAPP modifiedpolymeric water proofing membrane 3 mm thick without comsidering mineral (weightnot less than 3.50 Kg/Sqm )by LPG torch method over entire area with 100 mm overlapping and sealed and applying another coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm and applying two coat of aluminium paint @ 100 gm/Sqm on roof over roof treatment orvertical surface including dismantling of old APP Membrane from roofcomplete all as specified & directed..(Roof in non accessible approx height ex. 4.00 m and n.exc. 8.00 m complete as directed by Engr in Charge ( Cost of Necessary Scaffolding shall be deemed to be included in quoted rates ) |
| 33 | M&L Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified & directed.(Roof in non accessible approx height ex. 4.00 m and n.exc. 8.00 m complete as directed by Engr in Charge ( Cost of Necessary Scaffolding shall be deemed to be included in quoted rates ) |
| 34 | M & L for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified & directed.(Roof in non accessible approx height ex. 4.00 m and n.exc. 8.00 m complete as directed by Engr in Charge ( Cost of Necessary Scaffolding shall be deemed to be included in quoted rates ) |
| 35 | M & L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 includingBitumen primer for use in waterproofing and damp-proofing treatments complete all as specified & directed. |
| 36 | S&F welded steel wire fabric weight n\" exc 4 Kg per Sq.mas in extra reinforcement to RCC menbers including all cutting, bending and binding complete all as specified and directed |
| 37 | M&L for18mm thick Marble (Green or coloured) stone for floor, steps, jambs, pillars, window cills, cooking platform and like13-15mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including M & L for 15mm thick screed in CM 1:6 including dismantling of old exisiting stone slabcomplete all as specified and directed |
| 38 | M & L for machine cut kota stonein slab flooring 20-25 mm thick over and including M & L for 15mm cement screedin CM 1:6 laid and jointedwith grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing including dismantling of old exisiting stone slab complete all as specified and directed. |
| 39 | M & L for machine cut kota stone in dado,skirting, wall cladding 20-25 mm thick over and including M & L for 10mm cement screedin CM 1:4 laid and jointedwith grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing including dismantling of old exisiting stone slab complete all as specified and directed. |
| 40 | M&L for 18mm thick granite (of any type and shade) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking plateforms and like in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding of edges complete over and including M & L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 including dismantling of old exisiting stone slabcomplete all as specified and directed |
| 41 | M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm laid on floor surface jointed and pointed with colouredcement to match including M & L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 cement and dismantling of floor tile including cement mortar bedding complete all as specified and as directedby Engineer-in-Charge. |
| 42 | M & L for non- skid ceremic colouredtiles7 to 8 mm thick(Square/rectangular) areaof each tile exceeding0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointedin neat cementslurry and pointed in whiteor colouredcement to match including dismantling of floortiling and including M & L for 15mm thick screed bed in cm-1:6 all as spd or as directed. |
| 43 | M&L for coloured printed glazed ceramic tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 300mm x 200 mm jointed and pointed with colouredcementto match including M & L for 10 mm thick renderingof cement mortar 1:4and dismantling of existingtile including cement mortar bedding complete all as specified or as directed. |
| 44 | M&L for coloured printed glazed ceramic tiles 7 to 8 mm thick on walls dado,/skirting (square/ rectangular) of 450mm x 300 mm jointed and pointed with colouredcementto matchincluding M & L for 10 mm thick renderingof cement mortar 1:4and dismantling of existingtile including cement mortar bedding complete all as specified or as directed. |
| 45 | M&L forVitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to matchover and incluidng M & L for 10mm thick renderingin cm 1:4 including dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge. |
| 46 | M&L forVitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to matchover and including M & L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 cement and dismantling of floor tile including cement mortar bedding complete all as specified and as directed by Engineer-in-Charge. |
| 47 | M&L for 400mm x 400 mmx ( 10 to 12 mm thick ) out door vetrifiedanti skidcolouredtiles (Square/ rectangular) in floors etc set and jointedin neat cementslurry and pointed in whiteor colouredcement to match over and including M & L for 15mm thick screed bed in cm-1:6including demolition of old tiles all as spd & as directed. |
| 48 | Demolition cement concrete(un reinforced)in ground floor and packing n exc 15 cm thickness (below or above ground level) all as spd and directed. |
| 49 | M & L for plain cement concrete 1:4:8type D-2 (Using 40mm graded stone aggregate ) as infoundation filling & mass concrete complete all as spd and directed |
| 50 | M & L for 75 mm thick cement concrete 1:3:6 type C-2 ,using 40 mm graded stone aggregate as in plinth protection laid to slope of 1:2,finished surface even and fair without using extra cement with and including all necessary formwork to divide the area in panels,finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with filling (one partbof hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed. |
| 51 | M & L Proviiding 100mm thick Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface finishing cement concrete surface even and smooth complete all as specified and directed. |
| 52 | M & L for Forming construction joints20mm deepx 10mm vide filled with sealing compound grade \"A\" complete all as specified and directed. |
| 53 | M & L PCC (1:3:6) type C-1(using 20mm gradedstone aggregate) as in surface channels and drains complete all as specified. |
| 54 | Extra for forming fair finished drain or channels 30cm inner girth in cement concrete , using extracement, including forms, moulds, mitred/stopped ends etc. complete all as specified |
| 55 | Add or deducted for each 25mm grith or part thereof over or under 30cm -ditto- |
| 56 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 57 | S & F Rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 58 | Dismantling asbestos cement (corrugated, semi corrugated etec ) sheets in roof covering complete all as specified and directed. |
| 59 | S& F Pre -painted galvalume aluminium zinc coating GI based corrugated steelsheet 0.50 mm thick of an color having tensile strength of 550 MPa as in roof covering /cladding to wall ,fixed with self tapping screws as spdcomplete all as specified and directed. |
| 60 | S& F Pre -paited galvalume aluminium zinc coating GI based plainsteelsheet 0.50 mm thick of an color having tensile strength of 550 MPa as in roof covering /cladding to wall ,fixed with self tapping screws as spdcomplete all as specified and directed. |
| 61 | M&L PlainCement concrete 1:2:4type B-0 using12.5 mm greded stone aggregate in leveling course ,benching , holdfast etc ,finishedeven & complete all as specified and directed. |
| 62 | Demolition of Roof, floors (Other than ground floors ) beams,Staircase ,landing chajja,and similar suspended work in cement concrete is reinforforced (reinforcement cut as required to facilotate demolition complete all as specified and directed. |
| 63 | M & L Reinforced Cement Concrete 1:2:4 type B-1(using 20 mm graded stone aggregate) as in Chajjas, shelves etc. complete all as specified and directed. |
| 64 | M&L for existing kota stone floor pointed withpigments to match the shade of the slab includding rubbing andwax polishingcomplete all as specified . |
| 65 | M & L for Mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 66 | M & L Form work to chullah hoods, shelves, chajjas, through and similar items including edges in flat surfaces for rough finish surfaces. |
| 67 | Taking down Chowkats or frames with shutters (Without taking off shutters from the frames)not exceeding 1.5 Sqm each including iron mongries, hold fast etc andincluding making good disturbed portions of walls in CM 1:4 complete all as specified and directed. |
| 68 | Taking down Chowkats or frames with shutters (Without taking off shutters from the frames)exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed. |
| 69 | Taking down shutters of any description exceeding 1Sqm but not exceeding 2 Sqm each complete all as specified and directed. |
| 70 | S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 71 | S&F 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc,complete all as specified and directed |
| 72 | S&F 105mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 73 | S & F 30 mm thick flush door shutter solid core construction with block board coreand plywoodface panels commercial type on both sidecomplete all as specified and directed. |
| 74 | S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., with, edges of framing with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for securing glass etc. sizes of members of shuttersas specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkhats complete all as specified and directed. |
| 75 | Supply and fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube 47x47mm (19 gauge) all as specified and directed. |
| 76 | S & F factory made solid panel PVC door shutters 30 mm thick (style)consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides & as gap insert for top- rail and bottom rails.Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing. |
| 77 | S&F in repair steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wire gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit(II) rate for filling PCC in frame deemed to be included in quoted rates(iii) MS grill,glass and wire mesh shall be measured and paid seperatly under relevant item of schedule |
| 78 | S & F in repair Steel ventilator with top hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 79 | S & F 100 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed. |
| 80 | S & F 100 mm long medium weight, stainless steel Butt hinges with screws complete all as specified and directed. |
| 81 | S&F 200mm longmild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed. |
| 82 | S & Fmild steelpressed handle, ovaltype, stove enamelled blacksize of handle 125mm ISI marked . |
| 83 | Supply and fixmild steel, sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate length of bolt 300 mmcomplete all as specified and directed. |
| 84 | S&Fmild steel 300 mm long ordinary rat rail rodpattern helical door springs, incl roller and roller plate complete all as specified and directed. |
| 85 | S & F 125 mm long Aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 86 | S & F 150 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed. |
| 87 | S & F in repairs 75 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed. |
| 88 | S&F in repairs 200mm longmild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed. |
| 89 | Supply and fixin repairs mild steel, sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate length of bolt 300 mmcomplete all as specified and directed. |
| 90 | S & F in repair 0.56 mm thick plain Aluminium sheeting, Alloy 31000 H4 in drip and straight flashing and in coverings of door shutter complete all as specified and directed. |
| 91 | S & F in Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 92 | S & F in repair Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and directed. |
| 93 | S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads n exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed. |
| 94 | S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. |
| 95 | M & L for painting to new wood and wood based surfaces of any descriptionexc. 10 cm width or girthwith two coats of synthetic enamel paintover a coat of pink primerincluding prepration of neworpreviously untreated surfaces all as specifiedor as directed. |
| 96 | M&L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primercomplete all as specified and directed. |
| 97 | Taking up or down 15 mm steel tubing and connections complete all as specified and directed. |
| 98 | Taking up or down 20 mm steel tubing and connections complete all as specified and directed. |
| 99 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 100 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floorscomplete all as specified and directed. |
| 101 | S&F in repairGun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore dia of pipe. |
| 102 | Dismantling& breaking up drains pipes 100/75 mm (Saltglaged ware ,AC,PVC) Set in cement mortar |
| 103 | S & F PVC (SWR) pipes double socketed in any length with rubber Ring joints fixed to walls 110 mm bore fixed complete. |
| 104 | All as per Item No 103 abovebut 75 mm bore complete. |
| 105 | S & F PVC (SWR) bends any radius 110 mm bore fixed in repair complete. |
| 106 | All as per item No above but 75 mm bore complete. |
| 107 | S & F PVC (SWR) juntion single T equal or unequal 110 mm bore fixed in repair complete. |
| 108 | S & F PVC (SWR) juntion single T equal or unequal 75mm bore fixed in repair complete. |
| 109 | S & F PVC (SWR)vent cowl 110 mm bore fixed in repair complete. |
| 110 | S&F in repair PVC Nahani trap with grating 110mm x 75mm or as per site requirement complete all as specified and directed |
| 111 | S & F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including all joints complete all as specified and directed |
| 112 | S & F in repairs 15 mm bore CP Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.Make : Jaquar, Cat No- CON 037 PM/kohler K-16093 IN -4-CP/Grohe-20280000 |
| 113 | S & F in repairs 15 mm bore Chromium plated Angle/Stop valves fency type(straight or angular), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.Make - Jaquar Cat No. COP057PM or Cera Cat No. F8040301 or Kajaria Cat No KB811003 |
| 114 | S & F in repairs 20 mm bore gate valve , cast copper alloy complete all as specified and directed. |
| 115 | S&F in repairs Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight2 0 m m - 2 1 0 g m s ) complete all as specified and directed. |
| 116 | S&F in repairs Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight15 mm - 210 gms ) complete all as specified and directed. |
| 117 | S&F in repairs Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) |
| 118 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing tosteel pipe or unionMake- JAQUAR CAT-OHS-35495 or CERA CAT-F7010112MB ,or Kajaria Cat No KA570004 |
| 119 | S&F for in repairs CP Brass Tubular towel rail, 20mm dia, D type, 60cm long between flanges with both side holdersaquar, Cat No -ACN1111 SMor Cera Cat No F5014103CH or Kajaria Cat No KA990001 |
| 120 | Supply and fix in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thickAC building board or commercial plywood on PVC frame complete all as specified and directed. |
| 121 | S & F in repairs Vitreous China Ware Wash hand basin flat back, size 550x400mm in repairs including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed.Make Jaquar FLS-WHT-5801/Kohler K-24562/Grohe-P04-PAR-c042MIC. |
| 122 | S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 123 | S&F in repair 15 mmbore brass chromium plated , pillar taps fancy type, cast copper alloywith capstan heads screwed down high pressure screwed for iron pipe with or without lettered \"Hot\"or \"Cold\"with long screwed shanks and fly nutsor as specified or as directed. Make-JAQUAR CAT- COP-005BPM or CERA CAT-F1005101GG or Kajaria Cat No. KB1011011. |
| 124 | S&F in repair 15mm bore dia chromium plated 2 way angle cock with flange complete all as specified and directed. |
| 125 | S&F in repair 15 mmbore brass chromium plated single lever basin mixer without popup waste system with 450mm long braided hoses & base flange complete all as specified and as directed. Make : Jaquar, cat No-COP 167BPM or Cera Cat No. F 1003461 orKajaria Cat No KB1211026 |
| 126 | S&F in repair 15 mmbore brass chromium plated single lever wall mixer (including L bend) ,connecting ,legs & wall flanges complete all as specified and as directed. Make : Jaquar, cat No- QQP 7273PM orCera Cat No F1003402 or Kajaria Cat No KB111018 |
| 127 | S & F in repairSinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cementmortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495 mm x 420 bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed. |
| 128 | S & F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cementmortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed. |
| 129 | S&F in repair vitreous China Urinal half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1:3 including PTMT spreader, PTMT waste coupling, PVC waste pipe complete all as specified and directed.Make : Parryware Cat No. CO575 or Cera Cat No. S4020113 or Kajaria Cat No COSIMA-KS511. |
| 130 | S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580x440 mm size white with integral foot rest with Cast Iron `P\" or `S\" trap, front or back inlet andincluding connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern and flush pipe)all as specified and directed. |
| 131 | S & F in repairs Vitreous China water closet Padestal patternwhite, including mild steel chromium plated or aluminised hinging device seat cover size 630x450 mm size white with Cast Iron `P\" or `S\" trap, front or back inlet andincluding connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor all as specified and directed. |
| 132 | S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed.Make : Parryare Cat No. E8090 or Cera Cat No. B1010102 or Kajaria Cat No. KAMEA-K01002. |
| 133 | S & F in repair Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. (Note -Bldgheight is Aprrox up to 11 m Necessary scafolding shall be included in the cost ) |
| 134 | S & F in repair Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.(Note -Bldgheight is Aprrox up to 11 m Necessary scafolding shall be included in the cost ) |
| 135 | S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including Powder coated Aluminium snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete allas specified and directed. |
| 136 | S & F 1000 Ltr white Color Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 500 but n exc. 1000 litre complete all as specified and directed. |
| 137 | S & F 500 Ltr white Color Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 250 but n exc. 500 litre complete all as specified and directed. |
| 138 | M & L for Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating Make: Dr. Fixit of pidilite or equivalent per sqm in each coat with roller application.(Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.) |
| 139 | S&F in repairs 32mm bore GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed. |
| 140 | Supply and fix in repair 140mm long Floor door stopper made of double Aluminium rod and hard rubber shoe fixed with steel screws complete all as specified and directed. |
| 141 | S&F in repairs waste pipe 32mm dia 1mtr long |
| 142 | S&F in repairs PVC connections 15mm size with PTMTnuts of length 450mm |
| 143 | S&F in repairs Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) |
| 144 | S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight, 15mm-90gms/20mm-125gms). |
| 145 | S&F in repairs Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms)® |
| 146 | S&F in repairs Waste coupling of PTMT(half or full threaded) .(Minimum weight 32mm45gms/40mm-60 gms |
| 147 | S&F in repairs Waste coupling of PTMT(half or full threaded) .(Minimum weight 32mm45gms/40mm-60 gms suitable for urinals |
| 148 | S&Fin repairs 25 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed. |
| 149 | S&F in repair Grating doom 100mm dia of PTMT(Minimum weight 25gms) |
| 150 | S&F in repairs Seat cover for EWC with brackets for fixing in seat complete all as specified and directed. |
| 151 | S&F in repairs to CP Brass jet spray for EWC complete all as spd and directed. |
| 152 | Dismantling of RCC Tank dia 1.5 m and height 1.25m along with cutting of reinforcement and cleaning the whole surface by throwing away dismantled material to low lying area exc 250m to 500 mincludingmaking good to disturbed portionsurface with cement mortar 1:4 or PCC 1:2:4type B-1complete all as specified and directed..(Note -Bldgheight is Aprrox up to 11 m Necessary scafolding shall be included in the cost ) |
| 153 | Notes:-Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender. |
