|
| 1 | M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar (1:6) complete all as specified. |
| 2 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement. |
| 3 | Demolition Brick work or stone/ boulder masonry, built in cement mortarincluding allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and directed. |
| 4 | M&L for Preparing newly plastered surfaces and applying two coats of Premium emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls over a coat of wall putty to make surfaces smooth. |
| 5 | Demoltion of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris outside MOD land. |
| 6 | M&Lfor 150 mm thick Cement concrete typeB-2, 1:2:4 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed. |
| 7 | M&L for light coloured vitrified tiles Double charged tiles of any design and pattern, 800x800x9 to 10mm thick, as in floor and skirting etc incl 15mm thick screed bed in CM (1:6) Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, tiles shall be free from visible defects including dismantling existing tile work with screed bed.Note:- Shade of the tiles including Colour, design and pattern shall be approved by GE .Complete all as specified and directed |
| 8 | Ditto as item no 07 above but as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM (1:4) and including dismantling existing tile work with plaster complete all as specified and directed. |
| 9 | Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick Tinted/plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainlesssteel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and including Dismantling/Cutting ofexistingwindows any type and make good and match with existing walls at any hight complete all as directed by Engr-in-charge all as specified. |
| 10 | Supply & fixing of UPVC windows or UPVC framed portion 2 track 2 panel sliding windowof profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainlesssteel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and including Dismantling/Cutting ofexistingwindows any type and make good and match with existing walls at any hight complete all as directed by Engr-in-charge all as specified. |
| 11 | M&L in repair, fixing false ceiling with light weight 12 to 15mm thick Fiber tiles of size 595x595mm suspended on silhouette profile suspension system of grid made from hot dipped GI steel section notary stitched double webbed power coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace).The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated galvanized steel of dimension 3.0mm long x (15mm+10mm)x22.5mm and laying false ceiling for services like diffusers grill including cutting, makingopening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, all complete at all height as per specification, drawing and as per direction. |
| 12 | S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified. |
| 13 | S&F Multicolour double layered black out fabric roller blinds Rolling type including hanging mechanism water resistant, UV protection and printed on blinds DMDE crust for window etc fixed complete all as directed .Make: Vista/Amar |
| 14 | M&L for preparation of Old/Newlyplasteredsurfaceand applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- Apex ULTIMA (Asian Paints) OR Equavalent. |
| 15 | M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified. |
| 16 | S&F aluminium ( Die cast) body door closer hydraulically regulated designation No 3, universal type, suitable foor door shutter of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complete all as specified and directed.Make :- Godrej /Everite / Hardwin |
| 17 | S & F Pre-painted galvalume aluminium zinc coating AZ-150 GI based plain steel sheet 0.50mm thick of any colour (ISI Marked)having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 18 | S&F Powder coated of any colour (minimum thickness of powder coating 50 micron), aluminium Partitions, door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges,anodised aluminium snap beading, screws etc. complete all as specified. |
| 19 | M&L for Point wiring complete with and including 1.5 sq. mm (nominal area) single core multi stranded FRLS copper conductor PVC insulated unsheathed cable 1100 volts grade ISI marked drawn through in and includingWiring with Copper conductorcables in PVC casing & caping metalic rigidPVC conduitwith accessories such as bend ,tees, junction boxes etc. suitable modular boxes for mounting fittings like modular switches, modular socketsand fan regulators etc with modular sheet coversincluding one run of1.5 Sqmm PVC insulated andunsheathed multi strandFRLS copper conductor as green colourearth wire and connected to common earth dully complete all as specified and directed for the following:- |
| 20 | One light/fan/bell point controlled by one switch |
| 21 | One 3 pin socket outlet, 5Amps on the same board withother switches, with cables 1.5sq. mm size |
| 22 | One 3 pin socket outlet 5A on independent board |
| 23 | All as per item 19 above but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand ) copper conductor cable for 3/6 pin socket outlet 15 amp on one independent board. |
| 24 | S&F Modular Switchone way 6 Amps, 1 module all as specified and directed. |
| 25 | S&F Modular Socket 2 module for2 / 3 pin 6 Ampall as specified and directed. |
| 26 | S&F Modular Switchone way 16 Amps, 1 module all as specified and directed. |
| 27 | S&F Socket 2 module2in1, 3 pin, 6 and 16 Amp, complete all as specified and directed . |
| 28 | S&F ceiling rosePVC / polycorbonate isolated body 3 terminals with base plate ISI marked including taking down old unserviceable ceiling rose completeall as specified and directed.. |
| 29 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V ACwhite recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete |
| 30 | Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 31 | S&F MCB SPN 63 Amps complete all as directed by Engr-in-charge |
| 32 | S&F MCB SP 240 Volts 5 to 40 Amps complete |
| 33 | M&L for sub main wiring complete with 4 runs of 6.0 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB\"sincluding provision of 2 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly completeall as directed by Eng-in-charge |
| 34 | M&L for sub main wiring with two runs of single core PVC insulatedunsheathed cable 4sqmm (nominal area) 1100 volts grade multistranded FRLS copper conductor with one run of 4 sqmm PVC insulated unsheathed multistranded single core copper conductor 1100 V grade and connecting to common earth drawn throughand including PVC concealed conduit medium grade ISI mark not lessthan 25mm outer diacompleteandaccessories of suitbale size as required. |
| 35 | Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipemedium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed. |
| 36 | Earth continuity conductor or mainearthing lead fixed to wall on batten or recess or chases or buried inground or drawn in conduit/pipe orfixed to poles or any other indicatedsituation for loop earthing etc. as required 2mm dia 25x3mm aluminiumstrip |
| 37 | Supply and fixing wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/minwith all accessories complete all as directed by Engineer - in - charge. Make:- Bajaj/Havells/Crompton/Usha |
| 38 | S&Fin replacement highly efficient LED down light warm white 20 Watts IP 44 rating,recessed mounted wall washers, tilted 70 degree outwards and swivels 360 degree, pressure die cast aluminium in powder coated white finish with optimized heat sink for efficient heat dissipation with electrinic driver all as specified and directed. Make:- Havells/Crompton/Bajaj/Philips |
| 39 | Supply and fix PVC air freshner 200 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm including cutting, drilling and making hole for provision of exhaust fan all as specified and directed. Make:- Bajaj/Havells/Crompton/Usha |
| 40 | S&F Lamp holder, PVC/Polycarbonatetype with cord grip cap suitable forpendant fittings |
| 41 | Supply & fix MCB DB 4 way, 415V, 50Hz, AC, sheet metal enclosure, double door, IP 43 protection suitable for MCBTPN/4 pole capacity 100 Amps as incomer and SP/DP/TP/TPN MCB\"s as outgoings comprising of 200 Amps busbar rating, neutral bar, duly powder coated painting and fixed flush in wall and making good the disturbed surfaces to match with existing surface and making electrical connections using suitable sizes of copper thimbles/ lugs including taking down old unserviceable item complete . |
| 42 | Supply and fix 3 ton Tower AC\"s Floor type NA-Star rating for the capacity of >10,465 Watts (>9000kcal/hour) Split Air conditioner indoor unit -floor standing type/Tower type IS1391(part2) Non Inverter AC 415V,3 Phase, 50 Hz, AC R32 GWP 675(for R32) Model Turbo Mode, Dehumidification mode,Dry Mode,Eco saving, Timer ,Swing,fan speed control.On/Off Auto off, Auto restart, indoor Temperature indicator,Dust Filter,sleep mode Noise level as per Table 5 ,CI9.13 of IS 1391(Part2) 2023 complete all as specified and directed. |
| 43 | Supplying and fixing of out door stand for 3 ton tower AC with all accessories all as specified and directed by Engr-in-charge |
| 44 | Supplying and fixing of drain pipe with insulation of 20/25 mm dia PVC pipe for 3 ton tower AC with all accessories all as specified and directed by Engr-in-charge |
| 45 | Supplying and fixing of copper pipe both suction and liquid including insulation and communication cable for 3 ton tower AC with all accessories all as specified and directed by Engr-in-charge |
