Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Complete removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, facias etc. using mechanical means like mechanical sander etc. with internal dust extraction system for surface preparation prior to painting work complete all as specified and directed |
| 2 | Applying with one coat of exterior primer which provides exceptional whiteness and opacity and ensures strong adhesion of the top coat. Priming work shall be carried out post all repair and preparatory works including cleaning the surface by removing loose particles, dust and other foreign materials using water by pressure washer complete all as specified and directed. |
| 3 | Applying 2 coats of modified acrylic exterior emulsion having excellent scrub and peel resistance, superior whiteness, excellent finish, resistance to fading of colours, advanced anti fungal and algal protection against all round weather and paint performance of Minimum 5 Years so as to obtain an acceptable finish all as per manufacturer\"s instruction complete all as specified and directed |
| 4 | Wall care puttyin existing plastered/ old decorated grit finish/ texture surfaces of bldg (average thickness 2mm for desired smoothness and leveling of surfaces in two or more layers) by usingsand paperingto make surface smooth and ready to receiving finish including necessary scaffolding and safety arrangements and applying two coats of exterior emulsion paint in approved tint over one coat of exterior wallprimer including prepration of surface and necessary scaffolding and safety arrangementsup to four storey buildings(all as per manufactures instructions) complete all as specified and directed. |
| 5 | Two coats of oil bound distemper overone coat of interior wall primer (all as per manufactures instructions) including preparation/removal of existing treatment of wall surface and applying putty on wall as required to provide smooth finish, complete all as specified and directed. |
| 6 | Two coats of plastic emulsionpaint overone coat of interior wall primer (all as per manufacturer\"s instructions) including preparation/removal of existing treatment of wall surface and applying putty on wall as required to provide smooth finish, complete all as specified and directed. |
| 7 | Preparation of old decorated surfaces of walls and applying one coat of cement base paint, up to height of four storey bldg including necessary scaffolding and safety arrangements complete all as specified and directed |
| 8 | Preparation of old existing plastered /unplastered surface of bldg and applying one coat of exterior emulsion paint, including necessary scaffolding and safety arrangements up to height of four storey building complete all as specified and directed |
| 9 | Preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and directed. |
| 10 | Preparation of old decorated ceiling surfaces and applying one coat of oil bound distemper complete all as specified and directed. |
| 11 | One coat of white wash on old wall surfaces including preparation ofsurfaces, complete all as specified and directed. |
| 12 | One coat of white washing on old ceiling surfaces including preparation ofsurfaces,complete all as specified and directed. |
| 13 | Demolition of brick work, stone/ bouldermasonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified & directed . |
| 14 | Brick work using old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 in wall / parapet / drain upto 4 storey building complete all as specified & directed. |
| 15 | All as per serial item No 14 herein before but except bricks (using old serviceable bricks) –ditto- |
| 16 | Rendering 15mm thickin Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 17 | 10mm thick rendering in Cement and Sand mortar 1:6 over concrete /brick surfaces, in patches,finished even and smooth without using extra cement , including taking down old cement plaster and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed. |
| 18 | Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. |
| 19 | Rendering 5mm thick in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement, including taking down old cement plastercomplete all as specified and directed. |
| 20 | Preparation of new surfaces of any description of wall, facia, ceiling, RCC etc and applying two coats of oil bound destemper over one coat of interior wall primer including wall care putty (average thickness 1.5 to 2.5mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed. |
| 21 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint (any colour) including all necessary scaffolding and safety arrangements, complete all as specified and directed. |
| 22 | Three coats of white wash on plastered or unplastered ceilingsurfaces including preparation of new surfaces complete all as specified and directed |
| 23 | Providing 1.0mm to 1.5mm thick dune/ grit finish ready mixed product with natural stone granules / minerals in particle size of 400-600, 600-800, 1000-1200 micros consisting of excellent synthetic /acrylic binder anti cracking, anti foaming, anti fungal, anti rusting agents and applied directly over and inluding 15mm thick rendering in cement and sand mortar 1:4 including taking down existing plaster for multi storey building over cement plaster / stone surface,including necessaryscaffolding work,all as per manufacturer instructions complete all as specified and directed. |
| 24 | Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 25 | Taking down chowkhats or framen.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed. |
| 26 | Taking down chowkhats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame,complete all as specified and directed. |
| 27 | Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm complete all as specified and directed. |
| 28 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 29 | Factory made solidPVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforcedwith MS square tube in opening as per specification as directed by Engineer-in-Charge. |
| 30 | 30mm thick flush shutters, teak wood face, designer pattern with decorative choice lamination on both side of the door fixed with adhesive,solid core construction, with block board core, commercial type on both sidescomplete all as specified and directed. |
| 31 | 1st class hardwood plain, solid, straight chowkats and frames, wrought,framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints,omplete all as specified and directed. |
| 32 | 30mm 1st class hardwood Plain, framed, (1st class Teak Wood) panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats and framing is moulded on solid, complete all as specified and directed. |
| 33 | 30 mm thick (batten thickness) 1st class Teak Wood, plain, framedpanelled shutters (any number of panels), Teak Wood designer pattern with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers suplied and fitted to chokhats complete all as specified and directed. |
| 34 | S&F30 mm thick (batten thickness) second class hard wood,glazed and Skeleton shutters, open rebated and prepared to receive glass, gauge, etc (without sash bars) , divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats completeall as specified and directed.(Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I) |
| 35 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 36 | Factory made solid PVC moulded door shutter, with wood free EPS core 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 37 | Powder coated aluminium sections as inframes/ shutter of doors/window/ventilators /partitions,(Sliding / openable/ three track)including jointing cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. fixed as in repair complete all as specified and directedNote : (i) Minimum thickness of power coating shall not be less than 50 micron.(ii) Weight of aluminum section only shall be measuerd and paid.(iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws .(iv) The rate shall be inclusive of neoprene beadings, snap beading, screws etc and in case of sliding shutters locking arrangement and rollers in sliding shutters. Weight of fitting fixtures will not be measured for arriving the weight of aluminum section.(v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items.(vi) Design as directed by Engineer in charge. |
| 38 | 5.00mm thick selected quality tinted / black glass,fixed to aluminum frame workin panels n. exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 39 | 5.00mm thick selected quality tinted / black glass,fixed to aluminum frame workin panels exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 40 | 3mm thick aluminium composite panel sheet (ACP) colour as approved by Engr In Charge all as specified and directed. |
| 41 | Providing and fixing factory made uPVC white colour sliding window area exceeding 2 sqm each, three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed tothe wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mmnominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludescost of glass and includes all other connected accessories. Net Opening will be measured lorpayment purpose.) |
| 42 | Mortice lock, verticle type, mild steel, 4 levers,size 100mm, brass body,complete all as specified and directed |
| 43 | Standard GI snap grid of size 605mm x 605mm frame work for false ceiling with main tee 32 x 24 x 1mm thick cross tee 26 x 24x 1mm thick and wall angle 24 x 24x 1mm thick having flange powder coating and covered with PVC thin sheet same to placed in grid by means of ceiling and grid to be tied properly / suitabely by GI strip / GI wire in truss / ridge / purlin including taking down old existing GI snap gridcomplete all as specified and directed.Note : ceiling board shall be measured and paid as supply only. |
| 44 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) incl any sunk or raised moulding to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed |
| 45 | Gl frame work for seamless ceiling comprising of Gl periMetre channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clipsacross the intermediate channel at 457 mm centre to centre complete all as specified and directed |
| 46 | Non asbestos fibre cement building boards of size 600x600mm and 6mm thick fixed or laid/inserted to timber /GI/ Aluminium frame work with screws complete all as specified and directed. |
| 47 | Hollow PVC wall lining, with necessary screws and drilling, PVCpanel 0.5mm thick each flap and both flap connected with ribs and overall thickness not less than 5mm design printed in 200 to 300mm wide pannels, fixed as in repaircomplete all as specified and as directed. |
| 48 | 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC fraame as per specification and drawing , complete all as specified and as directed. |
| 49 | Dismantling floor hearth or wall tiling including cementmortar bedding (but not backing) complete all as specified and directed |
| 50 | Glazed coloured ceramic tiles in vertical surface area exc 0.18 sqm but n.exc 0.36 sqm 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 51 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 52 | Coloured vitrified ceramic tiles 8-10mm thick (square / rectangular) polished, area of each tiles exc 0.18 sqm butn.exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 53 | All as per serial item No 52 herein before but in skirting including ncessary cutting as directed etc over and including 10mm thick rendering in cement mortar 1:4 |
| 54 | Vitrified ceramic tiles 10mm thick (square / rectangular) polished, light shade, area of each tiles exc 0.42 sqm but n.exc 1.00 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 (tiles shall be fixed with 3mm wide spacer and filled with grout of selective shade),complete all as specified and directed |
| 55 | All as per serial item No 54 herein before but in skirting including ncessary cutting as directed etc over and including 10mm thick rendering in cement mortar 1:4 |
| 56 | Factory made coloured chequered cement concrete tiles 250mm x 250mm x 22-25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 57 | Demolition of stone slab and tiles of any decription or thickness in floor , aprons etc laid bedded and pointed in any mortar , complete all as specified and directed. |
| 58 | Coloured non skid porcelain tiles exterior grade 400x400x9-10mm thick heavy duty 3D pattern (Endura from Johnson or equivalent) as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. |
| 59 | Kota Stone Slab flooring, minimum size 550 x 550mm, 18 to 20mm thick, best quality over and including cement screed bed 20mm thick in cement mortar 1:4, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, inclduing rubbing and mirror polishing with dismantling of existing old kota stone complete all as specified and directed. |
| 60 | Granite stone slabs, 16 to 18mm thick,width and length as per site requirement, best qualitymachine cut andpolished to be fixed infloors,cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of outer edgesand corners where directed with and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of existing damaged slab complete all as specified and directed. |
| 61 | Concrete interlocking paver block, with grey cement andno pigment, glossy finishdesign as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old tile complete all as specified and directed |
| 62 | Decorative Manglore pattern tile of size 450x 350mm or exceeding any size and shape including ridge of same specification & drawing, set andjointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 20mm thick rendering in cement mortar 1:4,complete all as specified and directed |
| 63 | Ceramic glazed tile of 3D pattern of size 600x 1200mm to 1200x1800mm fixed with chemical /adhesive including 10mm thick rendering in CM 1:3 on wall,complete all as specified and directed |
| 64 | Vitrified floor tile light/ dark shade 3D pattern superior quality of size area exceeding 1.50 sqm to 3.0 sqm fixed with chemical/adhesive on floor including 10mm thick screed bed in CM 1:3,complete all as specified and directed. |
| 65 | Vitrified floor tile light/ dark shade 3D pattern superior quality of size area exceeding 0.18 sqm to 0.36 sqm fixed with chemical/adhesive on floor including 10mm thick screed bed in CM 1:3,complete all as specified and directed. |
| 66 | Vitrified floor tile light/ dark shade 3D pattern superior quality of size area exceeding0.38 sqm to 1.2 sqm fixed with chemical/adhesive on floor including 10mm thick screed bed in CM 1:3,complete all as specified and directed. |
| 67 | Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed. |
| 68 | Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar and rubbish off premises complete all as specified & directed. |
| 69 | PCC 1:3:6 type C-1 (20 mm graded stone aggs) as in roof padding, roof kerbs rounded or chamfered on edges, complete all as specified and directed. |
| 70 | 20mm thick rendering in Cement and Sand mortar 1:4 over roof slab and sunken portion finished even and fair mixed with water proofing compound, including dimantling of the existing roof slab / suken portion complete all as specified. (NOTE : WPC will be measrued and paid separately) |
| 71 | Supply only integral water proofing compound (ISI Marked) complete all as specified & directed. |
| 72 | 3mm thick Atactic polypropylene polymer (APP) modified prefabricated water proofing membrane, based polymeric membrane minimum weighing 3kg/sqm andreinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished, complete all as specified & directed. |
| 73 | Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etccomplete all as specified and directed. |
| 74 | PCC Tiles 200x200x25mm thick with including 20mm thick cement mortar 1:4 jointedgrouted and pointed complete mixed with crude oil5%by weight of cementcomplete all as specified and directed. |
| 75 | Demolition of plain cement concrete (unreinforced) of any description and in any position complete all as specified and directed. |
| 76 | 100mm thick plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base and mass concrete complete all as specified & directed. |
| 77 | 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, including taking down old pipe complete all as specified and directed. |
| 78 | 20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, including taking down old pipe complete all as specified and directed. |
| 79 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) for concealed pipe etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge. |
| 80 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered with PVC base of superior quality of dia sufficient to accomodate the tank with 100mm high, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from siteall as specified in SSR Part-I and all as directed by Engineer-in-charge. |
| 81 | 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered with PVC base of superior quality of dia sufficient to accomodate the tank with 100mm high, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from siteall as specified in SSR Part-I and all as directed by Engineer-in-charge. |
| 82 | Single piece EWC (white) with UF seat cover, hingesfixing accessories set, cistern fitting size 365x655x760 mmP-trap 180 mm , fixed in repairs, all as specified and directed. Make : Hindware, cat Part No 92082(S-30)/ CERA cat Part No CITRUS S1013143 /Jaquar cat Part No FNS WHT 40751S22OUFSMZ |
| 83 | Full height pedestal wash basin complete set standard with three semi punched tap hole with matching tall pedestal, fixed as in repair complete all as specified and directed.Make- Hindware(cat No-10098 ), Cera (cat No- S2040109), Jaquar ( Cat No - FNS WHT 40801) |
| 84 | Vitreous china squatting pan \"orissa\" pattern,size 580 x 440 mm white, with integral foot rest including \"P\" or \"S\" trap (excluding flushing cistern and flush pipe) and making good to the floor fixed as in repair complete all as specified & directed by Engineer-in-charge. |
| 85 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes, set with concrete and making good to floor, fixed in repair complete all as specified & directed. |
| 86 | 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square n.exc 0.5 Sqm in each panes, including hacking out old broken glass complete all as specified and directed. |
| 87 | 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square exc 0.5 Sqm in each panes,including hacking out old broken glass complete all as specified and directed. |
| 88 | Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 89 | 250 mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed. |
| 90 | Vitreous china wash hand basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets,cutting for and pinning in ends of bracket or erecting stand, fixed as in repair complete all as specified and directed. |
| 91 | Vitreous China half stall urinal, fixed against wall in cement mortar (1:2),securing urinal with and including 60mm long brass screws, pointing around urinal back in cement, including CP waste coupling, 32mm PVC waste pipe, fixed in repairs,complete all as specified and directed. |
| 92 | PVC(SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc, fixed as in repair complete all as specified and directed. |
| 93 | 110 mm bore PVC (SWR) bends of any radius, fixed as in repaircomplete all as specified and directed. |
| 94 | PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints, laid in trenches or in flors, fixed as in repircomplete all as specified and directed. |
| 95 | 75 mm bore PVC (SWR) bends of any radius, with or without access doorcomplete all as specified and directed. |
| 96 | PVC (SWR) floor trap 75mm bore, plain with grating incl jointing with solvent cement, fixed as in repair complete all as specified and directed. |
| 97 | Door closer hydraulically regulated aluminum (die cast) body, designation No 3, universal type, suitable for door shutters of 701mm to 850mmin width and of weight between 36 to 60 Kg,fixed in repairs, complete all as specified and directed. |
| 98 | Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed as in repairs, complete all as specified and directed. |
| 99 | D\" type, 200mm aluminium powder coated handles for aluminium doorscomplete all as specified and directed. |
| 100 | Butt hinges 100mm size, of extruded aluminum alloy with galvanisedmild steel hinge pin, anodised, type C-21, complete all as specified and directed. |
| 101 | Bib taps brass, fancy type, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed. |
| 102 | 15mm bore pillar tap,with quarter turn, fancy type,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed. |
| 103 | Central hole Basin Mixer, Chromium plated without popup waste system with 450mm long PVC connection and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed. |
| 104 | 300mm brassbarrel tower bolts, with cast or sheet barrel and rolled or cost bolts and fixedof extruded section, complete all as specified and directed. |
| 105 | 75mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed type B-11complete all as specified and directed. |
| 106 | 100mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed type B-11complete all as specified and directed. |
| 107 | 150mm extruded brass handles, fabricated type polished ,complete all as specified and directed. |
| 108 | 300mm Brass sliding door bolt with sand or die -cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts , complete all as specified. |
| 109 | 200mm aluminum anodized barrel tower bolts of extruded section, complete all as specified and directed. |
| 110 | 150mm aluminum anodized barrel tower bolts of extruded section, complete all as specified and directed. |
| 111 | Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed. |
| 112 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 113 | Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed |
| 114 | 12mm thick toughned glassas in hinged doors, partitions automatic doors and similar work with or without frame of any type of material as required including cutting to shape, drilling holeswith necessary screws/ beading, rubber packing, L patch bottom and top, self closing patch etc,complete all as specified and directed.NOTE : Decoratiion/Design or unit name, emblem, crest over glass shutter will be approved by Engr-in-Charge before executionand the rates are inclusive of the same |
| 115 | 300 mm long stainless steel handle, fancy type , fixed to toughened glass, complete all as specified and directed. |
| 116 | Stainless steel lock for 10-12mm thick glass door, having knob inside with three keys, satin finish, complete all as specified and directed. |
| 117 | Brass chromium plated, tubular towel rail 20 mm dia. ‘D’ type, 60 cm long between flanges, fixed as in repair complete all as specified and directed. Make : JAQUAR Cat Part No ACN-1111SM or equivalent as approved in Appx \"C\" |
| 118 | Rimless back to wall WC of size 360x560x420mm with basin inner dimension 260x335mm on wt 30 Kg with internal dimension of inlet hole dia 58 + 3mm & external diaMetre of outlet hole dia 100 + 5mm with UF soft close slim seat cover, hinges, fixing accessories and single piece slim concealed cistern with floor mounting frame, installation kit & \"P type\" drain pipe connection set for wall hung WC (without flush control plate) having working complete all as specified and direted. Make : JAQUAR Cat Part No JCS-WHT-2400FP or equivalent as approved in Appx \"C\" |
| 119 | Table top wash hand basin of size 495x395x150mm and single lever Basin Mixer C with popup waste & 375mm long Braided Hoses to withstand pressure of minimum 10bar, having flow rate of 13.48LPM @ 3 bar, water tightness min 16 Bar & pressure resistance min 16 Bar complete all as specified and direted. Make : JAQUAR Cat Part No ALI-85051B or equivalent as approved in Appx \"C\" |
| 120 | Supply only table top wash hand basin of size 700x435x135mm and single leaver Bain Mixerwith popup waste & 375mm long Braided Hoses with withstand pressure of minimum 10bar, having flow rate of 13.48LPM @ 3 bar, water tightness min 16 Bar & pressure resistance min 25 Bar complete all as specified and direted. Make : JAQUAR Cat Part No ALI-85051B or equivalent as approved in Appx \"C\" |
| 121 | Shiny finish shower panel of size 1600 x230mm incl 2 movable ABS Each body massage jets, Head shower, Hand shower, Gascade shower and having minimum water pressure 2 bar incl fitting, all accessories complete all as specified and directed. Make : JAQUAR Cat Part NoJSHP-SSF-ST8896 or equivalent as approved in Appx \"C\" |
| 122 | Corner entry shower enclosure to fit in L shaped walls with door sliding to both sides (4 Parts) having glass thickness 6mm chrome finished of size Height 1950mm, Width : 1500mmx 1500mm incl fitting , all accessories complete all as specified and directed. Make : JAQUAR Cat Part NoJSE-CHR-ENNA1515X or equivalent as approved in Appx \"C\" |
| 123 | Wall to wall shower enclosure with two fixed glass and one openable door in between the square hardware and profile glass thickness 8mm black finished of size Height 2000mm, Width :2401 to 2800mm incl fitting,all accessories complete all as specified and directed. Make : JAQUAR Cat Part NoJSE-BLM-S830G2428H20Xor equivalent as approved in Appx \"C\" |
| 124 | 5.5 mm thick bevelled edge mirror of selected quality fixed to wall with stainless steel spacer stud, standoff screws (min 6 Nos upto 1.00 Square metre), size of standoff screw shall be min 25 x 25 mm , complete all as specified and directed |
| 125 | 25mm dia stainless steelcurtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed. |
| 126 | Galvanised mild steel wire cloth 0.56 mm nominal dia of wire & avg width of aperture 1.18 mm in fixed with tinned tacks, complete all as specified and directed. |
| 127 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed. |
| 128 | Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socketor power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete |
| 129 | Material and labour forpoint wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single coremulti stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising ofOne light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account.Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account. |
| 130 | All as per serial item 129 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed |
| 131 | All as per serial item 129 herein before but for socket outlet 3 pin 6 Amps on independentboard complete all as specified and directed |
| 132 | All as per serial item 129 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSHcable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor |
| 133 | Switch modular type (ISI marked), single pole, one way 6 Amps, one module(ISI marked), complete all as specified & directed. |
| 134 | Switch modular type (ISI marked), single pole, one way 16 Amps, one module(ISI marked), complete all as specified & directed. |
| 135 | Switch modular type (ISI marked), single pole, two way 6 Amps, one module(ISI marked), complete all as specified & directed. |
| 136 | Socket shutters outlet 2/3 pin 6 Amp modular type multi purpose two module (ISI marked), complete all as specified & directed. |
| 137 | Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed. |
| 138 | Modular switch type stepped fan regulator, single pole, 230 volt two module complete all as specified and directed. |
| 139 | Electric Bell, multi music type, AC, 230 volts, single pole all as specified and directed by Engineer-in-charge. |
| 140 | Modular switch type bell push, single pole, 230 volt one module,(ISI marked) complete all as specified and directed. |
| 141 | Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specifiedand directed by Engineer-in-charge. |
| 142 | Lamp holder, PVC/Polycarbonate type with back plate modular type fixed on wall suitable for batten fitting ,complete all as specified and directed. |
| 143 | LED Bulb 09 watt self ballasted Retrofit type lamp with PBT body shell and DC diffuser CCT 6500 K complete all as specified and directed. |
| 144 | LEDLights fitting 24 watt cool day white of approx size near to 868x93x33 mm , 220V AC decorative/model ultorn type including fitting fixed on wall/ceiling and connecting up complete with flexible cable white of suitable sizeand making necessary connection fixed as in repair complete all as specified and directed. |
| 145 | LED Mirror Lights fitting 17 watt cool day white of approx size near to 534 x 93 x 33 mm , 220V AC decorative/model ultorn type including fitting fixed on wall/ceiling and connecting up complete with flexible cable white of suitable sizeand making necessary connection fixed as in repair complete all as specified and directed. |
| 146 | LED Industrial outdoor type Bulkhead luminaires,IPrating not less than 45, highly resistant to dust and water1 x 9/10 Watt fitting in engineering plastic housing with clear prismatic diffusercomplete with all accessories and connecting up with flexible cable white ofsuitable size and making necessary connection fixed as in repair complete all as specified and directed. |
| 147 | LED 18W Surface mounted indoor type back lit downlighter suited for any modern workspace of size not less then 6-8\"\" round/square as per sample fixed as in repair complete all as specified and directed. |
| 148 | Decorative, wall mounting, brushed nickel finish fixture with Single opal glass diffuser suitable for and incl 1 x 9W LED lamp B22 base, perfect ambience for living/bedroom fixed as in repair complete all as specified and directed. |
| 149 | Decorative, wall mounting, brushed nickel finish fixture with Double opal glass diffuser suitable for and incl 2 x 9W LED lamp B22 base, perfect ambience for living/bedroom fixed as in repair complete all as specified and directed. |
| 150 | Modern Bedside wall mounted reading fitting LED 2 Watt, adjustable head for better beam and focus, touch control switch, uniform light LED integration for right ambience, as per samplecomplete all as specified and directed. |
| 151 | Decorative, wall mounting fixture, in durable plastic body & designer mesh in gold finish suitable for 9 W LED lamp pettren Glaze type as per sample fixed as in repair complete all as specified and directed. |
| 152 | LED building security light fitting 1 x 35 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protectionincl mounting bracket of suitable size and connection fixed as in repair complete all as specified and directed. |
| 153 | Suface mounting LED 2\" x 2\", 36 watt, cool day/ warm white light (6000K) edge lit tile i extruded aluminium / CRCA steel sheet powder coated housing with full opal diffuser suitable fir perfect lighting complete including cutting hole of required size in POP/false ceiling making good disturbedincluding taking down any type ceiling fittingcomplee all as specified and directed. |
| 154 | Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one number single pole MCB 20 Amps , 240 Volts for AC/Geyser point complete all as specified and as directed. |
| 155 | Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified and directed. |
| 156 | Sub main wiring with two singlecore FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 4 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing throughPVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfacesby providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. |
| 157 | Sub main wiring with two singlecore FRLSH PVC insulated and unsheathed cable with copper conductor of size 10 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 10 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing throughPVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfacesby providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed.Note for serial item No 156 & 157 :(i)Two runs of cable, one run of earth wireshall be considered as one running metre(ii)Cutting chases will be measured and paid separtely(iii) colour code shall be Red for phase, Black for neutral and green for earth |
| 158 | Supply and fixing sub main wiring with Four singlecore FRLSH PVC insulated and unsheathed cable with copper conductor of size 10 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 10 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing throughPVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfacesby providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed.Note : (i)Four runs of cable, one run of earth wireshall be considered as one running metre(ii)Cutting chases will be measured and paid separtely(iii) colour code shall be Red for phase, Black for neutral and green for earth |
| 159 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth Complete all as specified and directed . |
| 160 | Disconnecting the power supplyand taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB\"s ,MCB\"s etcand removing from site, Complete all as specified and directed . |
| 161 | MCCB, 160 Amps, four pole, 3 phase , 25KA, 415 volt with adjustable thermal andmaganetic release, with proper thimble complete all as specified and directed |
| 162 | Vertical TPN distribution board double door flush mounting with provisions for MCCBs incomer upto 200 Amps & outgoing 4 way having IP 54 protection Complete all as specified and directed . |
| 163 | MCB distribution board, double door, 6 way, TPN flush mounting with provisions for MCBs incomer& outgoing having IP 54 protection complete all as specified and directed by Engineer-in-charge. |
| 164 | MCB distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 12 way (2 + 10 way) single pole and neutral link, complete all as specified and as directed. |
| 165 | MCB, Triple pole and neutral 63 Amp 415 volts 10 KA \"C\" series with all incomming/outgoing connections with proper size lugs, complete all as specified and directed by Engineer-in-charge. |
| 166 | MCB, SPN , 240 volt,40 to 63Amps, 10 KA , \"C\" series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 167 | MCB, SP, 240 volt,40 to 63Amps, 10 KA , \"C\" series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 168 | MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , \"C\" series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 169 | Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 Metre below normal ground level (with top edge of earth plate not less than 1.5 Metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways completeall as specified & directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
