|
| 1 | Surface excavation averaging 15cm deep and n.exc 30cm deep and getting outin soft/loose soil complete all as specified and directed |
| 2 | Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, man hole, laying of UGcables etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in hardt/dense soil complete all as specified and directed. |
| 3 | All sameas per itemNo 2 here-in-above but in soft/ loose soil -do- |
| 4 | Excavating in post holes (or similar holes) each not exceeding 0.5 cu. m, getting out in soft/ loose soil and removing surplus soil to a distance exceeding 500 m and making good surface. |
| 5 | Returning filling in trenches including spreading, leveling,watering and well ramming in layers not exceeding 25 cm thick in soft / loosecomplete all as specified and directed |
| 6 | Removing excavated surplus soil to a distance out side vicinity of MD land and depositing where directed complete all as directed. |
| 7 | M & L for Hard core of broken hard stone or boulders of guage not exceeding 63 mm , deposited spread as subbase to inter locking tilesin layers n.exc 15cm thick , watered & well rammedto true surface complete all as specified and directed. |
| 8 | M&L for anti-termite treatment to the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & as directed |
| 9 | M&L for anti-termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified & as directed |
| 10 | M & L for PCC1 :4 : 8 type D2 using 40 mm gradedcrushed stone aggregate as in foundation filling &mass concrete complete all as specified and directed |
| 11 | M & L for PCC1 :2 : 4 type B2 using 40 mm gradedcrushed stone aggregate as in foundation filling mass concrete complete all as specified and directed |
| 12 | M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded, chamfered angle and throating as directed including useand waste of form work (straightor curved) all exposed surface of concrete finished fair complete all as specified & as directed |
| 13 | M&L for cement concrete (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in PCCblock of size as ordered on roof topat places where directed & laying,clamping the strip any size secured on the block with suitable size GI bolt duly grouted, nut bolt washer etc. complete all as directed .(Note : Copper/GIStrip measured & paid seperately , quoted rate isdeemed tobe inclusive of formwork , nuts & bolts , washers etc). |
| 14 | M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in columns, pillars, piers, posts, struts and the like.Note :- Reinforcement & formwork shall be measured and paid for separately |
| 15 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete. |
| 16 | S&F mild steel framed work as in doors, gates, steel frames, chowkats, etc. of angle or other section with gusset plates, rails, braces, etc., complete conforming to Grade E-165 (Fe 290), drilled for fixing of steel sheeting or other covering including necessary welding etc and fixing in position complete all as specified and as directed. |
| 17 | S&F mild steel tubular work in tubular trusses, roof trusses (framed), trussed, purlins, crane gantries, rails and fastemings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 with one coat of zinc chromate primer paint. |
| 18 | S&F 10 mm dia and over TMTbarscut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 19 | All as per serial item No. 18 here-in-before but 6 to 8mm dia -do- |
| 20 | S&F pre-painted galvalume (zincalume) aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof coverings/cladding to walls fixed with self tapping screws as specified. |
| 21 | M & L for 100 mm thick plain cement concrete 1:3:6 type C2 using40mm graded crushedstone aggregate as insub base offloor and finished the surface complete all as directed. |
| 22 | M & L for 100 mm thick plain cement concrete 1:2:4 type B2 using40mm graded crushedstone aggregate as insub base offloor laid in alternative bays not exc 2.5 mts in length and finished even & fair including joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed. |
| 23 | M & L for 75 mm thick plain cement concrete 1:4:8 type D2 using40mm graded crushedstone aggregate as insub base offloor/ foot path etc and finished the surface even & rough complete all as directed. |
| 24 | M&L M-35 grade, 60 mm thick machine pressed, PVC moulded precast cement concrete interlocking paver blocks any shape and size with grey cement and pigment confirming to IS: 15658-2006, laid over and including 50 mm thick compacted sand cushion complete complete all as specified.(Note ; Quoted rate is deemed tobe inclusive of 50 mm thick compactedsand cushoning). |
| 25 | M&L for 20 mm thick Granite (of any type) machine cutwork as in skirting , dado , urinalpartition etc as orderedjointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting and polishing (mirror polish i.e. full granite polish as per local trade practice) all as specified & directed |
| 26 | M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation ofnew steel surface complete all as directed. |
| 27 | M&L for galvanized steel water tubing medium grade15 mm bore(ISI Marked)with fittings such as bends, tees, elbows, nipples, unions, short pieces etc laid in trenches making necessary connection and testing on completion all as specified anddirected.Note :- Excavation & earthwork shall be measured & paid for separately. |
| 28 | All as per item No. 27 here-in-above but 20 mm bore of pipe -do- |
| 29 | All as per item No. 27 here-in-above but 25 mm bore of pipe -do-(Note for itemNo 4 to 7 : (i)Excavation & earth workmeasured and paid seperately . (ii) Make : TATA / JINDAL / ZENITH |
| 30 | Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 25 mm. |
| 31 | S&F in repairs 15mm bore bib tap standard of PTMT any colour, high pressure, screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and as directed |
| 32 | S&F 25 mm size Gun metalglobe or gate valves(ISI Marked) conformingtoIS 778 : 1984 with iron wheelhead screwed box and both ends for iron pipeor union complete all as directed |
| 33 | All same as per item No 32 here-in-above but 15 mm bore of pipe -do- |
| 34 | M & L for Making Wall Mounted wooden cabinet for Offices of Size 0.60mX0.75mX0.60m fixed on the wallcomprising the following:-(i) The shutters shall be made of 18 mm thickWPC having a density of 600kg/m3with required fixing arrangement as in cup board shutters/ shelves and pelmets box etc incl providing horizontal shelves complete all as specified & directed by Engr-in-Charge. (ii) The patternapprovedfixed with approved adhesive as per manufacture instruction including similar colour edge self adhesive banding tape hot pressed on exposed edge of board fixed on both side of shutter internal side white laminate external side colour and shelve finished in white laminated complete all as selected by Engr-in-Charge.(iii) M & L SS fancy type handles 150 mm for Cabinet shutter, qty-01 handle per shutter . (iv) M & L for Auto hinges / SS Telescopic hinges / L hinge 75 mm length hinge for door shutter&shutters of SS ISI mark qty-2 hinge per shutter. (v) M & L for magnetic door lock & SS Chainl (if required) for Cabinet door shutters .Qty No 1 per shutter. (vi) S&F for locking device with key for cabinet shutter.Qty No-01 per Cabinet. (vii) Thefinished cabinet shall be cleaned by removing all wastes , dusts etc tothesatisfaction ofEngineer-in-charge failing which thework stands incomplete & thesame shall not betaken overby MES. |
| 35 | S&Fmild steel galvanized pipe light gradefor protection &passing of LT cable fixed to poles/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified for size of 40mm bore dia. |
| 36 | All sameas per itemNo 35 here-in-above but 50 mm bore light grade pipe -do- |
| 37 | Supply and laying 38 mm dia Double walled corrugated (DWC) Duct (Dura- Guard) as per IS-14930 Part - II for LT UG cable protection including coupler, elbows, T- Joint, Bends, etc and test report Make :- Dura- line/Gemini/Rex. |
| 38 | Supply, fixing ,Teting and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls with fixing acessories of6 Sqmm 2 Core all as specified and directed. |
| 39 | All sameas per item No 38 here-in-above but cable of size 25 Sqnn ,4 Core -do- |
| 40 | M&L for air termination single pointed aluminium rod 12 mm dia and 300mm long duly fixed on 150 x 150 x 200mm height PCC castingand insulating material on top complete all as specified and directed |
| 41 | M&L for aluminium strip 25mm x 3.15mm with saddles and fixing screws etc for fitting the strip for roof conductor & down conductors above ground level,complete all as specified & as directed |
| 42 | M&L for test point terminal block made of gun metal or phosphorus bronze size 75mm x 75mm x 25mm, drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screws with nuts & washers complete,all as specified & as directed. |
| 43 | M&L for Galvanized iron strip 32mm x6mm, buried in ground,complete all as specified & as directed.Note :- Excavation & earthwork shall be measured & paid for separately. |
| 44 | M&L & fixing of DWC pipes it should be flexible & should allow deformation in diameter as well as In joints under external load & soil natural movement, socket & spigot joint with electrometric sealing ring , it should be highly corrosive resistant & it should be impact resistant, chemiacal resistant, flexible & light weight of size 50 mm ID & 63 mm outer dia complete with coupler, elbows, joints,& necessary space parts complete all as specified.Make: Dura line/ Astrel/Prince or equivalent |
| 45 | Supply install,testing & commissioning spot fountain 12WUnder-waterLight with 720systems lumens, IP68, IK08, Housing Made Up of Hard Chrome plated Stainless steel powder coated with High Purity lenses with glass, Mounting with screws. Must be installed under the water to prevent the light from burning up because of overheating, ,External driver,RGWB light,Make :Wipro or Equivalent ,complete all as specified and directed by Engr-in- charge. |
| 46 | M&L for earthingincluding taking out GI plate with pipes earthing lead fasteners etc and earthing complete with galvanised steel earth plate electrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the pl;ate not less than 1.5 Mtr below normal ground level,connected to galvanised iron strip 25x4 mm as earth lead by means of bolts,nuts ,washer and check nut of galvanized steel, protected by and including GI pipe 40 mm bore (light grade) and connected to main switch / MCB DBs box point / LP test point as directed and including cement concret pit in 1:2:4 type B1 using 12.5mm graded aggregate, with cast iron miled steel frame embedded in the concrete enclouser fineshed flushed & CI cover 10 mm thickof size (300mmx300mm CI) having locking arrengment hinged to CI frame all as shown under electrical plate of SSR Part - I 2009 and as directed includingpainting the external surface of chamber & cover with enamel paint in diffrent colour as directed and writing earth results & date of test carried out with white paint on black painted background,wiremesh funnel 20 mm bore GI pipe medium grade for watering adequate quantity of charcol and common salt in alternate layer of 15cm 3ft x 3ft thick all around the electrode including necessery excavation & earth work in any type of soil complete testing on completion, complete all as specified & as directed by Engneer-in Charge. |
| 47 | M&L for earthingincluding taking out GI plate with pipes earthing lead fasteners etc and earthing complete with galvanised steel earth plate electrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the pl;ate not less than 1.5 Mtr below normal ground level,connected to galvanised iron strip 25x4 mm as earth lead by means of bolts,nuts ,washer and check nut of galvanized steel, protected by and including GI pipe 40 mm bore (light grade) and connected to main switch / MCB DBs box point / LP test point as directed and including cement concret pit in 1:2:4 type B1 using 12.5mm graded aggregate, with cast iron miled steel frame embedded in the concrete enclouser fineshed flushed & CI cover 10 mm thickof size (300mmx300mm CI) having locking arrengment hinged to CI frame all as shown under electrical plate of SSR Part - I 2009 and as directed includingpainting the external surface of chamber & cover with enamel paint in diffrent colour as directed and writing earth results & date of test carried out with white paint on black painted background,wiremesh funnel 20 mm bore GI pipe medium grade for watering adequate quantity of charcol and common salt in alternate layer of 15cm 3ft x 3ft thick all around the electrode including necessery excavation & earth work in any type of soil complete testing on completion, complete all as specified & as directed by Engneer-in Charge. |
| 48 | Supply, fix and installationof Decorative pole ofheight4 mtr, made of MS ( IS 1161) mounted on base plate with 4 holes for anchor bolts fixing , foundation bolt, with lockable base door , the finishing of pole must be PU paint/ Custome RAL shades, -Darrent Pole of make Bajaj with suitable forpost top fixture ,with Post Top Luminaire- CAT PART:BCF DRA 30W LED WH CL PT- 30W- 3000K, DRACO ofMake Bajaj with Powder Coated die cast Housing with AL. heat sink & optical grade clear PMMA diffuser IP 65 ( LED Compartment ). suitable for mounting height of 3Mtr/4Mtr/5mtr . or equivalent in crompton/ Havellscomplete all as specified & as directed by Engneer-in Charge. Note: (I)Foundation work will be done as perdrawing given by OEM. (II) Aceesories like base plate , foundation bolt, post top luminaire are deemed to included in quoted rate(iii) The quoted rate is deemed tobe inclusive forfoundation work incl PCC (1:3:6) type-C-2 using 40mm graded aggregate as in coping and complete excavation & earthwork ). |
| 49 | Supply, fix, testing and installion of security watch tower automatic rotating swivel search light , weather proof, 360 degree rotating , with High intensity LED revolving search light , Energy saving, long range, 300 watt , beam range upto 1000 mtr, IP66, high lumen LED> 160 lm/w, PF > 0.95, CCT: 5000K-6500K, CRI > 70, optical grade PMMA/PC lens reflector, efficiency > 95%, multiple circuit to avoid complete run down, narrow, narrow beam (5-7 degree), die cast LM6 body with air fins, constant current, average lux (in 500 mm circle ) at 10 mtr away 3000 to 10000 , working volt 90v- 310 v, protection from short circuit, O/L, low / high volt, working temp -20° C to +60° C, quality meet- LM79, LM80, BIS, IK07 tests. The motorised stand shall be auto swivelling, suitable for mounting of search- light on roof-top & such design to rotate 360°continoiusly in 3 rpm over the night. The revolving mechanism is fully covered with weather & rust proof fiber box with maintainance door, foundation holes (4 nos) at bottom and wall mounted control panel with add on features of speed controller (01 to 10 rpm) with rev/forw. buttonand motorised tilting upto 45 degree button Make: Kalin CAT NO: MRSL-LRFLL25-PC30 or quivalent in Bajaj/Crompton/Havells. complete all as specified and as directed by Engr-in-Charge. |
| 50 | S&F open well submersible pump of capacity 2 hp Make:Kirloskar or Equivalent ,including Panel,cables & starteras per manufacturers recommendations including instaling & testing as per manufacturers instructions completeas direced. |
| 51 | Supply install,testing & commissioning DMX MasterController,withcompletely made in India product. A stand alone interface for installation in electrical DIN Cabinets with Din rails,which can control from 512 to1024 and can go up to 2048 channels on 1, 2 or 4 DMX universes.ArobustStandAlonemode and a wide range of trigger possibilities (RS232, Contacts, Clock, NODE x4 ports, Master/slave), USB-C Networks Ethernet, Internet, WIFI compatible when connected to a router Multiple Zone 10 Zone, play 10 scene/sequence per time in Stand Alone, Memory of Micro SD Card ( max. 256 GB ) and 8Mb Internal memory . Art-Net and sACN, fromSDcard,includingtriggers(2x512).Amaster/ Save Synchro (32 max wired / 128 max Ethernet) that Commands from the Contacts (speed, scene, dimmer, zone). Default startscene, Scene priority, Cross Fade time between scenes,AutomaticSceneRecoveryifthepoweris cut off and 16-bit and fine channel management. Triggers options of RS232 In/Out (16 characters max forRS232triggers,commandsororders)and UDP / Ethernet triggers and commands (from SDK). Software Requirements with System Compatibility of Windows, Mac, iOS. Flexible, adaptable mounting options, Should be provided with light show authoring software, Direct line voltage power supports 100—240VAC,Minimum five configurable effects, Using light show authoring software to select from standard five effects, adjust effect settings such as color,speed, and brightness. IP20. Addressing & Programming inclusive and with two Year Warranty. Brand name shall be embossed one each lighting fixtures.complete all as specified and directed by Engr-in- charge. |
| 52 | Supply install,testing & commissioning Isolated, constant Voltage type 120 W LED Driver enclosurein Extruded Aluminium metal enclosure . Driver shall be made in India compatible for RGBW luminaires with silicone potted and IP66 Protected of same make as luminaire. Output voltage of the driver 24Vdc. Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and Over Voltage Cutoff Protection and 440V withstand for 8 hours minimum& should have large operating input voltage range of 150V to 300VAC(nominalratedvoltage–240V)with5KV internal surge protection. LED driver shall have inbuilt output short circuit, over voltage protection,Thermal Shut-down protection,Make:Wipro or Equivalent, complete all as specified and directed by Engr-in- charge. |
| 53 | Supply install,testing & commissioning5-Core 5CDMXcable/PatchcordPatchEndcap1m IP67 S Type 5 Core Connector,complete all as specified and directed by Engr-in- charge. |
| 54 | M&L for GI or SS fountain ring(25 mm dia,length-8mtr),suitable for fountain along with control valve,all as specified and directed by Engineer-in-Charge. |
| 55 | S&F DMX cable IP67 T Type 5 Core Connector as per site requirement & Industrial Protocol/Data Bus cable RS-485, 1 pair 24AWG(7x32) Tinned copper, PE Insulation, Overall Beldfoil + tinned copper Braid(90%) Shield, PVC Outer jacket(1 mtr length),complete all as specified and directed by Engr-in- charge. |
| 56 | Cutting the existing concrete/bituminous road/PCC surface width not exceesing 30 cm and making good of surface with 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate finsihed even and fair complete over 100mm thick PCC 1:4:8 type D2 using 40mm stone aggregate over consolidated/rammed earthsurface & making hole on wall or clamping on wall wherever its necessary all as specified & directed. (Note: Quoted rate is deemed to be inclusive ofPCCcutting any type of road and removal of debris). |
