|
| 1 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and directed. |
| 2 | Demolition of brick work built in cement mortar and in any position including all quoins, arches, pillars etc. complete all as specified and as directed. |
| 3 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in cm 1 : 6 complete all as specified and as directed by Engr-in-Charge. |
| 4 | M&Lfor 15mm thick rendering in cement mortar 1:6on wallsof other than fair face even and smooth withoutusing extra cement at any height competeall as specified and directed. |
| 5 | M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick or Concrete Surfaces after cleaning and preparation of wall, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.NOTE : WPC will be Measured and Paid under appropriate Item. |
| 6 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 7 | M&L for preparing surfaces plastered or unplastered of wall, priming plastered and other surfaces with alkali resistant priming paint applying two coats of oil bound distemper over wall care putty finish 2mm thick complete all as specified and as directed. |
| 8 | M&L for preparation ofnew plastered/concrete surface of wall/chajjas/facia and applying two coats of exterior emulsion paint over one coat of primer upto 12 Metre height including necessary scaffolding etc complete all as specified and directed. |
| 9 | Demolition of Cement Concrete (un-reinforced), bitumen road of any description and in position not otherwise specifically provided and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed. |
| 10 | Demolition of Cement Concrete reinforced (Reinforcement cut as required to facilitate demolition) of any description and in position not otherwise specifically provided and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed. |
| 11 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed. |
| 12 | Dismantling Wallandceilingboards,(fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets/ACP sheet, any thickness, including Grid, cover fillets at any height, including necessary scaffolding complete all as specified and as directed. |
| 13 | Dismantling of Stone slabs and tiles laid dry of any description or thickness and removing the same outside of MoD land distance exc 2.0 Km but n.exc 2.5Km complete all as specified and as directed. |
| 14 | S&F Dholpur stone 16 to 18mm thick cladding gang saw cut with machine cut edges, uniform colour of each stone size exc 0.25 sqm area and n.exc 0.5 sqm fixed with and incluing one number SS clamps (grade-202) of flat 30mmx2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastner, polishing, rubbing & including silicon treatement over and including backing coat 15mm thick in cement plaster (1:4) on brick work or concrete surface etc complete all as specified and directed. |
| 15 | M&L for cement concrete 50 mm thick type D-1,1:4:8 (20mm graded crushed stone aggregate) complete all as specified and directed. |
| 16 | M&L for Rubber moulded coloured (Red, Yellow & Black) precast concrete interlocking paver blocks with grey cement andpigment any shape and size, shade as approved by GE, 80mm thick conforming to IS 15658-2006M-40 grade and interstices filled with sand including 40mm thick sand cushion andincluding dismantling of existing tiles and removing the debris outside the defence land complete all as specified and as directed. |
| 17 | M&L for Rubber moulded coloured (Red, Yellow & Black) precast concrete interlocking paver blocks with grey cement andpigment any shape and size, shade as approved by GE, 60mm thick conforming to IS 15658-2006M-35 grade and interstices filled with sand including 40mm thick sand cushion andincluding dismantling of existing tiles and removing the debris outside the defence land complete all as specified and as directed. |
| 18 | Dismantling and refixing Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished 60mm thickness M-35 grade, laid over and including cement concrete 50mm thick type D-1, 1:4:8 (20mm graded crushed stone aggregate) and sand cushion of 40mm thick, complete all as specified and directed. |
| 19 | M&L for providing Precast cement concrete block Type B-1, 1:2:4 (20mm graded crushed stone aggregate) factory made as in Bed blocks, kerb stone etc with plain fair faces including chamfers, weatherings, throating etc.and setting in cement mortar 1:4 including dismantling of existing kerb stones and removing the debris outside the defence land complete all as specified and as directed. |
| 20 | M&L for preparation of New or previously untreated concrete/ plastered surfaces of kerb stone and applying Two coat of plastic emulsion paint, white or coloured/tinted over one coat of primer etc complete all as specified and directed. |
| 21 | M&L for Reinforced cement concrete Design Mix M-25 (20graded crushed stone aggregate)including rafts, footings, foundation beams, bases for columns, etc., complete all as specified and as directed. |
| 22 | M&L Cement Concrete 1:4:8 type D-2 (40mm graded crushed stone aggregate) in Foundation, Filling and Mass Concrete, complete all as specified and as directed. |
| 23 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, sides and soffits (if any) of foundation and similar work, vertical or to batter, complete all as specified and as directed. |
| 24 | S&F mild steel works for wind ties for roof including securing bolts etc including drilling holes and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 25 | M&L TMT Bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed. |
| 26 | M&L TMT Bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed. |
| 27 | S&F Rolled mild steel for steel roof truss (Framed), trussed, purlins, crane gantries, rails, post and fastings and heavey bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe- 410-W Gde E- 250 complete all as specified and directed by Engr-in-Charge. Note :- (i) The steel used shall be of primary producer only. (ii) Work shall be excuted upto 10 Metre of height. (iii) All necessary precautions and safety measures shall be taken while execution of work. |
| 28 | M&Lfor preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 29 | S&F Plain, galvanised, mild steel sheeting of 1mm thickness, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed. |
| 30 | S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment confirming to Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and as directed. |
| 31 | M&L for 110mm bore, PVC (SWR) pipes, single socket in any length, with rubber ring joints fixed on walls including PVC clamp for holding PVC pipecomplete allas specified and directed. |
| 32 | S&F 110 mm bore PVC (SWR) bends any radius complete allas specified and directed. |
| 33 | S&F for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 100 mm bore dia pvc pipe, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed. |
| 34 | S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (AZ 150) 0.50 mm thick (Any approved colour) having tensile strength of 550 Mpa as in roof covering\ cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 35 | S&Fexterior grade aluminium composite panel sheet of 3mm thick fixed in grid / ceiling frame work of steel composite sections/ panels with stainless steel rivets to approved size including necessary aluminium Grid/ framing, drilling etc, of sizes and spacing as per manufacturers instructions complete including filling up joints with silicon sealant etc. lengths of sheets as customized at site of work and of shades up to15m heightas required complete all as specified. |
| 36 | S&F Mild steel rag or lewis bolts, 20mm diascrewed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, butlengthof bolt exc 30 cm longcomplete all as specified and as directed. |
| 37 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as sepcified and as directed. |
| 38 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 mabove the starting point,complete all as specified and as directed. |
| 39 | S&F Powder Coating aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 40 | S&F Powder Coating aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 41 | S&F Powder Coating aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, sliding type with two track without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.), locking arrangement complete all as specified. |
| 42 | Material and labour for repair aluminium composite panel sheet of 4mm thick which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5mm thick aluminium foils with outer surfaces finished with 30 u PVDF and inner surface finished with a thin coat of polyester paint, fixed in panel to aluminium frame including all necessary frame work or powder coated snap beading and rubber basket complete all as specified and directed.Make :- Alstone/ Alex panel/ Armstrong/ Euroboard. |
| 43 | S&F toughned glass fix in door/window with rubber, beading & SS clamps in squares exc. 0.5 Sqm in each pane, thickness in 10-12 mm complete all as specified & directed by Engr-in-Charge. |
| 44 | S&F toughned glass fix in window with rubber, beading & SS clamps in squares not exc. 0.5 Sqm in each pane, thickness in 10-12 mm complete all as specified & directed by Engr-in-Charge. |
| 45 | Material & Labour for cast iron framed work for ornamental and intricate designsuch as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framedbalusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290. Gde-E-165. complete all as specified and as directed. |
| 46 | Materials and labour for 15-18mm thickgranite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, urinal partitions, cooking platform and like including backing coat of 15mm thick in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed. |
| 47 | M&L for providing edge moulding to 15-18 mm thick stone (any description) of counters vanities etc, including machine polishing to edge to give high gloss finish etc. complete. |
| 48 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 49 | M&L Glazed ceramic coloured tilesin vertical surfaces of size 350 x 250x 7mm / 450mm x 350mm x7mm thick set and jointed in neat cement slurry over and including 10 mm thick rendering in Cement Mortar 1:4for receiving the tiles complete all as specified. |
| 50 | M&L fornon skid ceremic tiles 7 to 8mm thick square/ rectangular area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed for floor finishes in Cement Mortar 1:4 complete all as specified. |
| 51 | Supply and fixing of computer-designed alphabets, numerals and symbols in Block / Roman / Italic or Indian language scripts, fabricated from stainless steel SS-304 letters having projection (rising) of 25 mm, fixed over self-adhesive diamond-grade retro-reflective sheet having projection (rising) of 55 mm, complete with LED light strip fixed behind the letters including AC-to-DC converter, all necessary fittings, fixtures, fasteners and accessories, fixed on concrete surface / wall / board / mat at any height, complete all as specified and as directed by the Engr-in-Charge.Size of letters: • Height: 375 mm to 425 mm • Width: 50 mm to 60 mmNotes :-(a) Width of letters and size of hyphens, commas, full stops, dashes and brackets shall be proportionate to the size of the alphabets / numerals / board.(b) Rates quoted shall be inclusive of hyphens, commas, full stops, dashes and brackets. No separate payment shall be made for the same.(c) Rate shall include the cost of all materials, LED light strips, wiring, converters, fixing arrangements, scaffolding, tools & plants, and labour, complete. |
| 52 | Taking down carefully aluminum/copper point wiring (light, fan, socket any type, power, bell etc. complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fitting, flood lights, submain etc) and removing the materialfrom site and making good the disturbed surfaces of walls ceiling etc complete all as directed. |
| 53 | M&L for Concealed Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, inuniversal colour code with & includingincluding medium grade stove enamelled steel conduit of20 mm diaincluding allaccessorieslike bends, tees, nipple, junction box, sockets etcconcealed in wall / roofincl and modular flush metal boxes 0.8 mm thick (Same make as switches) suitable for modular fittings including modular outer cover plate Make Legrand (Arteor)/Schneider (Zencelo) /Anchor (panasonic Thea)/ Goldmedal (Nixon Quorra) with inner frame suitable for cover plate as per site requirementfor mounting modular switches, sockets,etcincluding earth wire ofPVC insulated (FRLS) copper conductor multistranded of 1.5Sqmm size in green colour complete including making good (i.e plastering in cement mortar 1:6, one coat of putti and two coats of exterior emulsion paint with matching existing surface) for the following, complete all as specified and directed. |
| 54 | One light point /exhaust/ ceiling fan /bell controlled by one way switch 6 amp complete. |
| 55 | One 3 pin 6 Amps socket point controlled by one switch on same board. |
| 56 | One 3 pin 6 Amps socket point controlled by one Modular switch on independent board. |
| 57 | All as per item No.53 here-in-before butfor 3 pin / 5 pin 16 Amps sockets outlet with 2.5 Sqmm PVC insulated & unsheathed (FRLS) copper conductor main cable and 2.5 Sqmm PVC insulated unsheathed (FRLS) copper conductor in green colour as earth wire independent complete all as specified and as directed. |
| 58 | Supply and FixingModular switch 16/20 Amp single pole one way, 2 Module with indicator and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catoulage numberall as specified.Make : Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea) / Goldmedal (Nixon) |
| 59 | Supply and FixingModular socketshutter type,2-in-1, 3 and 5 pins 6 /16 Amps, combined 2 Module and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue numbercomplete all as specified. Make : Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea) / Goldmedal (Nixon). |
| 60 | Supply and FixingCeiling rose surface bakelite 100mm three terminals, Square in shape complete all as specified. |
| 61 | Supply and FixingModular switch 6 Amps single pole one-way, 1 Module and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue numbercomplete all as specified. Make : Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea) / Goldmedal (Nixon) |
| 62 | Supply and Fixing Modular socket shutter type, 2-in-1, 3 pins 6 Amps, ISI marked, combined 2 Module and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number complete all as specified. Make : Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea) / Goldmedal (Nixon) |
| 63 | Supply & Fixing Modular fan Regulator electronic step type 100 watt, ISI marked, 2 Module complete all as specified. Make : Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea) / Goldmedal (Nixon) |
| 64 | Supply and fixingdecorative ultra slim surface /Wall mounted T5 LEDbatten tube light complete fitting 1x 5 watt LED Tube fittingsuitable for mirror light with polycarbonate channel housing & integrated electronic driver, energy efficient, warm/cool/natural as per site requirement, 140V-270 volts, including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified. |
| 65 | Supply and fixing of indoor decorative ultra slim surface /Wall mounted T5 LEDbatten tube light complete fitting 1x 20 watt LED Tube fitting with aluminium channel housing & integrated electronic driver, energy efficient, 140V-270 volts, Warm/natural/cool as per site requirement type>110 Lm/Wattcomplete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified. |
| 66 | Supply and fixing ceiling fans complete with aluminium blades, down rods suitable for electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 215 CFM with service value 6.00 BEE. Five star rated with brushless direct current copper windingmotor (BLDC) complete all as specified and directed by Enginee-in-Charge. |
| 67 | Supply and fix in repair ofExhaust fan 300 mm sweep, 1900 CMH, 90 W, 4 blades with aerodynamic design, Mettallic type alongwith GIlouvers complete suitable to work on AC, single phase, 230 Volts, 1400 RPM, 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm all as specified and directed. |
| 68 | Supply and fixing in replacement of sheet metal enclosure double door vertical TPN 8 way with MCCB as incomer with 250 Amp rated bus bar IP 54protection, cement spill protector, door earthing including MCCB TPN 160 Amp 16 KA (same frame size) as incomer -01 Nos complete all as specified and directed. Make : Legrand/ Havells/ Goldmedal. |
| 69 | Supply and fixing MCB DB Single pole and neutral 08 way sheet steel phospehtised powder painted with IP 43 protection 240 V neutral link, earth bar and Din rail double door, conceled in wall including making good disturbed surface by one coat of putti and two coats of apex paint complete all as specified and directed. Make : Goldmedal/ Legand/ Havells. |
| 70 | Supply and fixing Arc Fault Detection Device (AFDD) with RCBO 32 Amp, 100 mA combined SPN MCB + AFDD+RCCB, offering protections for overload, short circuit, reidual current characteristices type A, over voltage protection above 270V AC +/- 5% & series, parallel arc fault, AFDD must be with dual test button for AFDD and earth leakage functions along with single diagnostic LED with blinking patterns for continious ON series arc parallel arc & over voltage protections Make Havells or equivalent in Goldmedal/ Legrand complete all as specified & directed. |
| 71 | Supply and fixingof MCB Single pole6 to 32Amp, 240V, 10KA, \"B\" curve curve with indicator light complete all as specified & directed.Make : Goldmedal/ Havells/ Legrand. |
| 72 | Material and labour for Sub Main Wiring with two run single core 1.5Sqmm (nominal area) multi stranded copper conductor FRLSH PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surfacein and including UPVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 1.5Sqmm (nominal area) FRLSH PVC insulated and unsheathed 1100 volts grade colour code cable for earth continuity and making good disturbed surface including making good (i.e plastering in cement mortar 1:6, one coat of putti and two coats of exterior emulsion paint with matching existing surface) including taking down old, complete all as specified and directed.Make of UPVC : Goldmedal/ Jindal Plast/ Precision/ Ashirvad/ AKG.Note :- Two run of 1.5 Sqmm + One run of 1.5 Sqmm for earth wire+one run of UPVC conduit 25mm dia shall be measured as one RM. |
| 73 | Material and labour forSub Main Wiring with two run single core 2.5 Sqmm (nominal area) multi stranded copper conductor FRLSH PVC insulated and unsheathed 1100 volts grade colour code cables, drawn on surfacein and including UPVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 2.5Sqmm (nominal area) FRLSH PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity including making good(i.e plastering in cement mortar 1:6,one coat of putti and two coats of exterior emulsionpaint with matching existing surface ) including taking down old, complete all as specified and directed.Make of UPVC : Goldmedal/Jindal Plast/Precision/Ashirvad/AKGNote:- Two run of 2.5 Sqmm + One run of 2.5 Sqmm for earth wire+one run of UPVC conduit 25mm dia shall be measured as one RM. |
| 74 | Material and labour for Sub Main Wiring with two run single core 4 Sqmm (nominal area) multi stranded copper conductor FRLSH PVC insulated and unsheathed 1100 volts grade colour code cables, drawn on surfacein and including UPVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 4Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity including making good (i.e plastering in cement mortar 1:6, one coat of putti and two coats of exterior emulsion paint with matching existing surface) including taking down old, complete all as specified and directed.Note :- Two run of 4Sqmm + One run of 4 Sqmm for earth wire + one run of UPVC conduit 25mm dia shall be measured as one RM.Make of UPVC : Goldmedal /Jindal Plast/ Precision/ Ashirvad/ AKG. |
| 75 | Supply and fixingof 150W LED high bay luminaries at the height of 25 metre complete with mounting arrangement such as chain duly fixed in roof/ grider/ channel/ angle iron with minimum system lumen output efficacy of 130 lumens/ watt. The luminaries shall meet IP-65 rating & luminaries housing should be made of high pressure die casted aluminium alloy with sealed tempered protective toughened glass, the total power consumption including driver should not exceed 150 watt complete all as specified and directed.Note : Necessary T&P, hydra, nut and bolts, anchoring accessories hanging hook suitable for acp false ceiling, necessary connections, connected spares to fix the highbay fitting to be provided by the contractor without any extra cost.Make : Jaquar/ Philips/ Havells. |
| 76 | Supply and fixing in replacement energy saving LED Flood light of 100 Watt Capacity high pressure die cast alumuninum housing with seal toughned glass cover,cool/warm white, system efficacy should be minimum 120 lumen/watt cool/warm as per site requirement, voltage range 120 -240 Volts IP -66 including making connection by three core cord cable 1.5 Sqmm, white in colourcomplete all as specified and as directed. Make : Jaquar/ Havells/ Philips/ Halonix. |
| 77 | Supply and install high wall inverter type split AC of cap 1.8/2.0 TRindoor and outdoor hot and cold complete made up of copper with blue fins to protect from rustwith cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with 5 star rating including copper tube upto 4 metre and eco friendly refrigerant complete all as specified and directed.Make: O General/ Daikin/ Mitsubishi Electric. |
| 78 | Supply and fixing of MCB protected socket with Modular MCB 16 Amps built in MCB + 16 Amps Top + Socket 16 Amps with concealed metal sheetsteel enclosure (Same make as MCB) with inner and outer modular cover for mounting complete including making good (i.e plastering in cement mortar 1:6, one coat of putti and two coats of interior emulsion paint with matching existing surface) including taking down old, complete all as specified and directed. Make : Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea) / Goldmedal (Nixon) |
| 79 | Supply and fixing Outdoor Morphis pole light 24W, Cool Day light /Warm white as per requirement, LED decorativePOLE (Same make as per light ), Product Dimensions (L x W x H) 3010 X 280 X 280 mm (tol.±5 mm), Rated Input Voltage & Frequency 220-240 VAC, 50Hz, 80 lm/W, made up of Housing Die Cast Aluminium with Matt Grey Powder Surface mounting, including excavation, PCC, suitable nut and bolts for fixing the pole and electric connections complete with light fitting and connecting accessories complete includingremoving existinglight all as specified and directed. Make : Jaquar Cat No. OWA BLK - 177300L24 or equivalent in Phillips/ K Lite. |
| 80 | Supply and fixing Outdoor Morphis Gate top light 24W, Cool Day light /Warm white as per requirement, Rated Input Voltage & Frequency 220-240 VAC, 50Hz, 80 lm/W, made up of Housing Die Cast Aluminium with Matt Grey Powder Surface mounting and electric connections complete with light fitting and connecting accessories complete including removing existing light all as specified and directed. Make : Jaquar Cat No. OGL-GRY - 17733L24H or equivalent in Havells/ Phillips/ K Lite. |
| 81 | Supply and fixing of Landscape Lighting (wall light) 2x3 Watt, Warm/Cool white, Rated Input Voltage 220-240 V AC, Luminaire Efficacy 80 lm/W, suitable for outdoor, Housing Aluminium Die Cast with Powder Coating, IP-54 including all connecting accessories complete includingremoving existing lighting all as specified and directed. Make : Jaquar Cat No. OWA-BLK-LWWL02R206XW / Havells Cat part No LHEVADPBPN6K007 / Phillips Cat part No 919215100070. |
| 82 | Supply and fixing of water storage heater vertical (geyser) with inner Tank Material : Blue Diamond Glass Lined Tank- 2X Corrosion Resistance, Outer Body Materia l: ABS, Type : Storage, Capacity : 25 Litres, AC 220-240 Volts, Wattage : 2000 Watts, with auto temperature cutoff, Pressure : 8 Bars, BEE Rating : 5 Star complete all as specified and directed. |
| 83 | Supply and fixing of 304 Grade SS Connection Pipe for geyser hot and cold water, Hose Pipe(45 cm) with nuts and washers and gaskets etc complete all as specified and directed. |
| 84 | M&L for 15 mm bore, Concealed in wall, steel tubes, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including making good (i.e plastering in cement mortar 1:6, one coat of putti and two coats of interior emulsion paint with matching existing surface) complete all as specified and directed. |
| 85 | S&F bib taps, cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule of size 15 mm bore.Make : Jaguar/ Cera/ Prayag. |
| 86 | S&F Stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of size 15 mm bore.Make : Jaguar/ Cera/ Prayag. |
| 87 | M&L for Cutting existing steel tubing of size 25/32mm bore for alterations or additions (each cut measured) done in position without taking down complete all as specified and as directed. |
| 88 | M&L for Screwing existing steel tubing for alterations or additions (or lenghtening screw on pipe to form connector) done in position without taking down complete all as specified and as directed. |
| 89 | S&F for silver mirror finish 1mm thick SS acrylic3D letter of 304 grade stainless steel and having LED light strip behind the letters. The length, width and depth of each letter shall be 300mm x 300mm x 30mm respectively (not more than 30 letters) Note: (i) this item include for all fixing materials required to fix the letters on the wall/roof/tinshed. (ii) Quoted rates include tapping to the nearest light point of required length and including the wirenot more than 15 metre of suitable size. (iii) The pattern/shade and the design of LED light strip will be as decided by the departement. |
| 90 | S&F for silver mirror finish 1mm thick SS acrylic 3D letter of 304 grade stainless steel and having LED light strip behind the letters. The length, width and depth of each letter (not less than 30 letter) shall be 450mm x 450mm x 30mm respectively. Note : (i) This item include for all fixing materials required to fix the letters on the wall/ roof/ tinshed. (ii) Quoted rates include tapping to the nearest light point of required length and including the wire not morethan 15 metre of suitable size. (iii) The pattern/shade and the design of LED light strip will be as decided by the departement. |
| 91 | Supply & laying of UG cable XLPE insulated armouredheavy duty elect cable with stranded aluminium conductor 1100 volts grade cross section area 50 Sqmm 3.5 core laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts etc including taking out of exisitng unserviceable cable of any size and description including removing/taking out damaged XLPE cable complete all as specified and directed. Make : Havells/ Polycab/ KEI.Note: Excavtion and earthwork will be measured and paid seprately. |
| 92 | M&L HDPE Pipe 50 mm dia for protection of cable, concealed in wall including making good (i.e plastering, one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed. |
| 93 | Material and labour for boring hole under road/ pavement/ hardstanding by trenchless technology using ultrasound technique & necessary machine for inserting DWC HDPE of pipe 100 mm size dia. DWC HDPE to be included in the quoted rate complete all as speciofied and directed. |
| 94 | Supplying and laying reinforced precast concrete cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed. |
| 95 | Supply and Spread Natural Riddled soil in trenches for cushioning and covering to cable complete all as specified and directed by engineer in charge.Note : (i) Natural soil shall be riddled by using sieve to separate composite particles etc as per IS and refilling in trenches before laying of cable 8 cm and 15cm after laying of cable. This is then gently punned down to a depth of 10cm above the top of upper-most cable. (ii) For the purpose of measurement only punned thickness only will be considered for payment. |
| 96 | M&L for work confirming to Fe-410-O or Fe-310-O as in cross arms, support, bracings, stiffeners, clamps channels fabricated from structural steel including nuts, bolts and washers welding, bending cold or hot drilling holes for bolts in any shape or size all as directed including two coats of aluminium paint over a coating of red oxide primer all as directed by Engr-in-Charge. |
| 97 | Note :- Amount of credit ofRs. 51560.00for retrieved materials is mentioned in Schedule of Creditof tender documents in pdf form which will be deducted offline while acceptance of tender. |
