|
| 1 | Demolition of Cement Concrete (Unreinforced) in ground floors and pavings n exc. 15 cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for 100mm thick cement concrete type B1, 1:2:4 using 20mm graded crushed stone aggregates as infloor finish even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for 75mm thick cement concrete type D2, 1:4:8using 40mm graded crushed stone aggregates as in sub base to floor, complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for 15mm thick Screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L forChequeredcement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L forvitrified (heavy duty) paving/parking tiles 30cm x 30cm x 10 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for Machine pressed precast conctete coloured interlocking paver block any shape and size fixed with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L forSand filling as cushioning under floors including watering and consolidation complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B1 1:2:4 (using 20mm graded crushed stone aggregate) complete all as specified and directed by Engr-in-Charge. |
| 10 | Demolition of stone/ boulder masonry, built in cement mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L Precast cement concreteblock masonry type C1 1:3:6 (using 20mm graded crushed stone aggregate) with solid blocks, exc. 10cm in width and, setting incement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever requiredwith necessary Excavation/Earth work complete all as specified and directed by Engr-in-Charge. |
| 14 | Taking down cement plaster on wall etc incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 15 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and to be finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L for preparing new surfaces including priming plastered and other surfaces with priming paint and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L preparation of surfaces of any description over 10cm girth or width, not otherwise described, and applying priming paints plaster coat and two coats synthetic enamel paint(ordinary tint each coat) complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for dismantling Trellis work (Jafri), includingtaking as under of battens in trellis (posts and rails measuredseparately) complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for providing precast cement concrete 1:2:4 type B- 0 (using 12.5 mm graded crushed stone aggregate) louvers and jallies, 25 mm thick (measured solid) including all moulding and frame work set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
