Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | ALMIRAH MEDIUMSTEEL FD-1032CP Handle : Removing of old unserviceable handles from Almirah medium steel and S&F new CP steel handle of exisiting size to Almirah medium steel all as shown on drawing complete all as specified and directed. |
| 2 | Lock : Removing of old unserviceable lock from Almirah medium steel and S&F new lock of approved make, 06 lever with two keys to Almirah medium steel all as shown on drawing complete all as specified and directed. |
| 3 | Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah med steel including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed. |
| 4 | Legs : Removing of old unserviceable leg from Almirah med steel and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed by Enger-in-Charge |
| 5 | All as per Srl item No. 4.00 here-in -before but bottom sheet of Almirah medium steel. |
| 6 | All as per Srl item No. 4.00 here-in -before but shelf of Almirah medium steel. |
| 7 | Removing of old unserviceable butt hinges of Almirah medium steel and S&F new butt hinges 75mm long and adjusting door by revitting/ welding complete all as shown on drawing complete all as specified and directed. |
| 8 | M&L for refixing of loose shelves with mild steel revitting/ spot welding complete all as specified and directed. |
| 9 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughlyto the almirah (internally & externally complete) |
| 10 | ALMIRAH LARGE STEEL 1/2 H, 1/2SFD/E6/MAP/18CP Handle : Removing of old unserviceable handles from Almirah large steel 1/2S, 1/2S and S&F new CP steel handle of exisiting size to Almirah all as shown on drawing complete all as specified and directed. |
| 11 | Lock : Removing of old unserviceable lock from Almirah large steel 1/2S, 1/2S and S&F new lock of approved make, 06 lever with two keys to Almirah medium steel all as shown on drawing complete all as specified and directed. |
| 12 | Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah large steel 1/2S, 1/2S including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed. |
| 13 | Legs : Removing of old unserviceable leg from Almirah large steel 1/2S, 1/2S and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directedby Enger-in-Charge. |
| 14 | All as per Srl item No. 13.00 here-in -before but bottom sheet of Almirah large steel 1/2H, 1/2S. |
| 15 | All as per Srl item No. 13.00 here-in -before but shelf of Almirah large steel 1/2H,1/2S. |
| 16 | Removing of old unserviceable butt hinges of Almirah large steel 1/2H,1/2S and S&F new butt hinges 75mm long and adjusting door by revitting/ welding complete all as shown on drawing complete all as specified and directed. |
| 17 | Replacement of unserviceable conduit pipe with new CP steel conduit pipe of siutable size of 20mm dia having wall thickness 1.25mm to Almirah large steel 1/2H,1/2S complete all as specified and directed. |
| 18 | Replacement of unserviceable socket with new Stainless steel socket/ brackets suitable for 20mm dia conduit pipes to Almirah large steel 1/2H, 1/2S complete all as specified and directed. |
| 19 | M&L for refixing of loose shelves with mild steel revitting/ spot welding complete all as specified and directed. |
| 20 | S&F 02 Nos of nylon bufferrs at the bottom of each legs with MS bolt complete all as specified and directed. |
| 21 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughlyto the almirah (internally & externally complete) |
| 22 | BED HARD STEELFD/E6/MAP/08 (R)Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of suitable size, ISI marked, plywood of unpolished edging of approved quality all as shown on drawing complete all as specified and directed. |
| 23 | Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18mm thick Prelaminated Particle board with colour/ shade approved by GE/ Engr-in-Chrge. All as per size and design shown on drawing complete all as specified and directed. |
| 24 | All as per Srl item No. 23.00 here-in-before but foot board of Bed hard complete all as specified and directed. |
| 25 | S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg complete all as specified and directed. |
| 26 | Welding to broken joints of bed hard complete all as specified and directed. |
| 27 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the bed hard steel complete all as specified and directed. |
| 28 | BIN LINEN MULTI PURPOSE FD/E6/MAP/09Removing of old unserviceable top from bin linen multipurpose and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle boardwith colour/ shade as approved by Engr-in-Charge/ GE. |
| 29 | Removing of old and unserviceable door shutters of bin linen multipurpose S&F of new door shutters made of 18mm thick exterior grade pre-laminated particle board as shown on drawing and as directed. |
| 30 | Removing of old unserviceable hingses and S&F of new hinges to bin linen multipurpose as per size and design shown on drg complete all as specified and directed. |
| 31 | Removing of old broken handles and S&F of new chromium plated steel handles to bin linen multipurpose as per shown on drg complete all as specified and directed. |
| 32 | Removing of old magnetic catcher and S&F of new magnetic catcher to bin linen multipurpose as per size and design shown on drg complete all as specified and directed. |
| 33 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 34 | Chair Dining Offrs (MAP) FD/E6/MAP/06M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed. |
| 35 | All as per Srl item No 34.00 above but front leg complete all as specified and directed. |
| 36 | All as per Srl item No 34.00 above but side rail complete all as specified and directed. |
| 37 | All as per Srl item No 34.00 above front/ back rail complete all as specified and directed. |
| 38 | All as per Srl item No 34.00 above but stiffner complete all as specified and directed. |
| 39 | All as per Srl item No 34.00 above but back strip complete all as specified and directed. |
| 40 | M&L for removal of unsv seat of chair, S & F of new foam cushion 4\" thick (ISI Marked IS-1741) 40 density for seat and covered with superior quality rexine / cloth, fixed with removable 12mm commercial ply wood as specified in drg and as directed and approved by Engr in charge. |
| 41 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 42 | CHAIR VERANDAHFD-359 & 256Cutting and removing of old cane from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats ofsynthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04mm wide of approved quality in Godrej Pattern complete all as shown on drawing complete all as specified and directed by Engr-in-Charge. |
| 43 | Welding to broken joints of Chair varandah complete all as specified and directed. |
| 44 | S&F in replacement PVC shoes to Chair Verandah all as shown on drg complete all as specified and directed. |
| 45 | CHAIR VERANDAH MAP FD/MAP-II/06, FD/MAP-II/15Cutting and removing of old/ unsv PVC Sheet from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04mm wide of approved quality in Godrej Pattern complete all as shown on drawing complete all as specified and directed by Engr-in-Charge. |
| 46 | Welding to broken joints of Chair varandah complete all as specified and directed. |
| 47 | S&F in replacement PVC shoes to Chair Verandah all as shown on drg complete all as specified and directed. |
| 48 | CHAIR WRITING STEEL/CHAIR VISITOR STEEL/CHAIR CUSHION WITH HANDLE (Drg No TP/CWE SPL DRAWING/MAP series/eqvt drgs)Replacement of old unserviceable/ broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F in replacement of old unservicable seat ply with new seat of 12mm thick plywood commercial quality (ISI marked). Seat shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. |
| 50 | S&F in replacement of old unservicable foam cushion of seat with new 75mm thick PU foam cushion including pasting to hot pressed plywood 12mm complete all as specified and directed. |
| 51 | S&F in replacement of old unservicable tapestry cloth of seat with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). |
| 52 | Replacement of unserviceable hessian cloth of seat with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 53 | S&F in replacement of old unservicable back ply with new seat of 12mm thick plywood commercial quality (ISI marked) back shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F in replacement of old unservicable foam cushion of seat with 40mm thick PU foam cushion including pasting to hot pressed plywood 6mm complete all as specified and directed. |
| 55 | S&F in replacement of old unservicable tapestry cloth of back with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). |
| 56 | Replacement of unserviceable cloth of back side of chair back with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 57 | Removing of old/ unserviceable tapestry cloth from seat and back of existing Chair Writing and S&F new tapestry cloth to seat and back of Chair Writing complete all as specified and as directed by Engineer-in-Charge.(Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). |
| 58 | Welding to broken joints of Chair writng complete all as specified and directed |
| 59 | S&F in replacement hard PVC shoes to Chair writng all as shown on drg complete all as specified and directed. |
| 60 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughlyto the Chair Writing steel complete. |
| 61 | CHAIR COMPUTER / Chair revolving with arms (Drg No FD/E6/MAP/01, TP & similar drg)Replacement of old unserviceable/ broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F in replacement of old unservicable seat ply with new seat of 12mm thick plywood commercial quality (ISI marked). Seat shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. |
| 63 | S&F in replacement of old unservicable foam cushion of seat with new 75mm thick PU foam cushion including pasting to hot pressed plywood 12mm complete all as specified and directed. |
| 64 | S&F in replacement of old unservicable tapestry cloth of seat with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs.175/- per meter as per sample approved by GE). |
| 65 | Replacement of unserviceable hessian cloth of seat with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 66 | S&F in replacement of old unservicable back ply withnew seat of 12mm thick plywood commercial quality (ISI marked) back shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. |
| 67 | S&F in replacement of old unservicable foam cushion of seat with 40mm thick PU foam cushion including pastingto hot pressed plywood 6mm complete all as specified and directed. |
| 68 | S&F in replacement of old unservicable tapestry cloth of back with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs.175/- per meter as per sample approved by GE). |
| 69 | Replacement of unserviceable cloth of back side of chair back with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 70 | Replacement of unserviceable hydraulic system of Chair for the adjustment of height complete all as specified and directed by the Engineer-in-Charge. |
| 71 | Replacement of old, unserviceable/ broken wheel base of Chair complete all as specified and directed by the Engineer-in-Charge. |
| 72 | Removing old/ unservicavle twin castor wheel from chair and S&F new twin wheel castors as per shape and size complete all as specified and directed. |
| 73 | Removing unserviceable synchro tilting mechanism & replacing with new synchro tilting mechanism, complete all as specified and directed by the Engineer-in-Charge. |
| 74 | CHARPOY IP FOLDING WITH HARD TOP FD-388 (R)Removing of old unserviceable ply wood from charpoy IP folding and S&F new 08mm thick BWR plywood with unpolished edging (ISI marked) of suitable size of approved quality in two pieces fixed with suitable screw steel on top complete all as specified and directed. |
| 75 | Welding to broken joints of charpoy IP folding complete all as specified and directed. |
| 76 | S&F in replacement hard rubber/ PVCshoes at the bottom of Charpoy IP folding all as shown on drg complete all as specified and directed. |
| 77 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughlyto the charpoi IP folding. |
| 78 | HAT STAND WITH MIRRORFD-233 and similar drawingsRemoving old broken/ unserviceable teak plywood from front frame of hat stand and S&F new 04mm thick OSTF BWR plywood both side laminated as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. |
| 79 | Removing old broken/ unserviceable plywood from back side of hat stand and S&F new 04mm thick BWR plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. |
| 80 | Removing of old/ broken looking mirror from hat stand and supplying and fixing new looking mirror of size 300 x 440 x 5mm of modi-gurard duly fixed in position complete all as shown on drawing. |
| 81 | Removing old broken/ unserviceable beading from hat stand and S&F new 06 x 35mm thick teak wood beading all as per drawing including french polishing to match the other parts complete all as specified and directed. |
| 82 | Removing old broken/ unserviceable wooden battens from hat stand and S&F new teak wood wooden battens as per shape and size shown in drawing complete all as specified and directed |
| 83 | Removing of old unserviceable aluminium/ brass pegs from hat stand and S&F new brass pegs of size 120 x 75mm (overall) to hat stand all as per drg complete all as specified and directed |
| 84 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 85 | PEG TABLE FD-277Removing of old unserviceable top from peg table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed. |
| 86 | Replacement of old unserviceable leg from existing peg table and S&F the same size new leg made out of 1st class hard wood teak to Peg table duly french polished all as shown on drawing complete all as specified and directed by Engineer-in-Charge. |
| 87 | All as per Srl item No. 86.00 here-in-before but long top rail, complete all as specified and directed. |
| 88 | All as per Srl item No. 86.00 here-in-before but short/ bottom rail, complete all as specified and directed. |
| 89 | All as per Srl item No. 86.00 here-in-before but stiffener of Peg table, complete all as specified and directed. |
| 90 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 91 | RACK SHOE STEELFD/E6/MAP/02 (R)Welding to broken joints of Rack Shoe steel complete all as specified and directed. |
| 92 | S&F in replacement hard rubber/ PVC shoes at the bottom of Rack shoe steel all as shown on drg complete all as specified and directed. |
| 93 | Removing of old/ unserviceable Jali (Shelf) from existing Rack Shoes steel and S&F new Jali (Shelf) duly black painted to Rack shoe steel complete all as shown on drawing complete all as specified and directed |
| 94 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughlyto the shoe rack steel. |
| 95 | SIDE BOARD FD-241/372/1112Removing of old unserviceable top from Side board and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board as per size/ colour/ shade existing complete all as specified and directed. |
| 96 | All as per Srl item No. 95.00 here-in-before but door of side board including aluminium anodized knob and continues piano type hinges, complete all as specified and directed. |
| 97 | All as per Srl item No. 95.00 here-in-before but side of side board, complete all as specified and directed. |
| 98 | Removing of old unserviceable back ply of side board and supply and fixing the new back ply of same size made out of 06mm thick commercial plywood (ISI marked) with colour/ shade as approved by GE/ Engr-in-Charge and as directed. |
| 99 | Replacement of unserviceable drawer with new drawer of same size and shape. Front of the drawer shall be made out of 18mm thick exterior grade pre-laminated particle boardwith colour/ shade as approved by GE/ Engr-in-Charge including CP steel handle.Sides, base and back of drawer made out of 12mm thick commercial ply wood (ISI marked) and fixing all as shown in drawing including one coat of french polish complete all as specified and directed. |
| 100 | Removing of old/ unserviceable handle from the side board and supply and fixing new 100mm long CP steel handle with steel screws as per sample, shape and size all as per drawing complete all as specified and directed. |
| 101 | Removing of old unserviceable legs with frame from Side board and supply and fixing new Ist class hard wood teak legs alongwith leg frame of side board all as shown on drawing complete all as specified and directed. |
| 102 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 103 | SOFA SET 04 SEATER WITH CUSHION (FD Series)Removing of old unserviceable arm rest from exiting sofa set 04 seater and supplying and fixing new 1st class hard wood teak arm rest to sofa set 04 seater complete as shown on drawing. |
| 104 | All as per Srl item No. 103.00 here-in-before but front/ back rail of sofa set 04 seater complete all as specified and directed. |
| 105 | All as per Srl item No. 103.00 here-in-before but side rail of sofa set 04 seater, complete all as specified and directed. |
| 106 | All as per Srl item No. 103.00 here-in-before but legs of sofa set 04 seater, complete all as specified and directed. |
| 107 | All as per Srl item No. 103.00 here-in-before but wooden battens of sofa set 04 seater, complete all as specified and directed. |
| 108 | S&F foam cushion of size 22\" x 21\",100mm thick 40 density duly, complete all as specified and directed. |
| 109 | Removal of tapestry cloth from existing foam cushion of seat/ back of Sofa set 04 seater and providing new cover of foam cushion (tapesty cloth of make D Decor, cloth fusion, yellow weaves, bombay dying) of approved shade of Indian make of rate not less than Rs. 450/- per meter duly stitched and fixing the same all as per drawing andas directed. The cover shall be removable duly provided with ZIP of make YKK, Riri Glossy, lampo complete all as specified and directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE). |
| 110 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 111 | SOFA SET 05 SEATER WITH CUSHION - FD-281/FD/MAP-II/02 Removing of old unserviceable arm rest from existing sofa set 05 seater and supplying and fixing new 1st class hard wood teak arm rest to sofa set 05 seater all as shown on drawing. |
| 112 | All as per Srl item No. 111.00 here-in-before but front/ back rail of sofa three seated. |
| 113 | All as per Srl item No. 111.00 here-in-before but front/ back rail of sofa single seated. |
| 114 | All as per Srl item No. 111.00 here-in-before but side rail of sofa set 05 seater. |
| 115 | All as per Srl item No. 111.00 here-in-before but legs of sofa set 05 seater. |
| 116 | All as per Srl item No. 111.00 here-in-before but wooden battens of sofa set 05 seater of Drg No FD-281 |
| 117 | All as per Srl item No. 111.00 here-in-before but Seat/ Back of Sofa three seated of Drg No FD/MAP-II/02 made out of plywood 12mm |
| 118 | All as per Srl item No. 111.00 here-in-before but Seat/ Back of Sofa single seated of Drg No FD/MAP-II/02 made out of plywood 12mm |
| 119 | S&F foam cushion of size 22\" x 21\", 100mm thick 40 density duly complete all as specified and directed. |
| 120 | Removal of tapestry cloth from existing foam cushion of seat/ back of Sofa set 05 seater and providing new cover of foam cushion (tapesty cloth of make D Decor, cloth fusion, yellow weaves, bombay dying) of approved shade of Indian make of rate not less than Rs. 350/- per meter duly stitched and fixing the same all as per drawing andas directed. The cover shall be removable duly provided with ZIP of make YKK, Riri Glossy, lampo complete all as specified and directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE). |
| 121 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 122 | STOOL DRESSING LADIES (FD/MAP-II/07)M&L replacement of existing unserviceable front side of stool dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white including 4mm teak wood beading, complete all as specified and directed. |
| 123 | M&L for replacement of existing unserviceable sides of stool dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white including 4mm teak wood beading, complete all as specified and directed. |
| 124 | M&L for replacement of existing unserviceable back of stool dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white including 4mm teak wood beading complete all as specified and directed. |
| 125 | M&L for replacement of existing unserviceable bottom of stool dressing ladies with new one made out of 6 mm BWR plywood complete all as specified and directed. |
| 126 | M&L for replacement of existing unserviceable openable shutter of stool dressing ladies with new one made out of 12mm BWR plywood along with folding handle as specified complete all as specified and directed. |
| 127 | M&L replacement of existing unserviceable runner 20mm x 20mm for openable shutter of stool dressing ladies with new one made out hard wood as specified complete all as directed by Engineer in charge. |
| 128 | M&L for replacement of existing unserviceable 50mm dia heavy duty revolving nylon wheel of stool dressing ladies with new one made as specified complete all as directed by Engineer in charge. |
| 129 | M&L for replacement of existing unserviceable handle heavy duty of stool dressing ladies with new one CP handle made as specified complete all as directed by Engineer in charge. |
| 130 | M&L for replacement of existing cushion of stool dressing ladies with new one cushion with rexine cover as specified and complete all as directed by Engineer in charge. |
| 131 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 132 | TABLE BEDSIDE(FD/E6/MAP/15(R) and relevent drgs)M&L for replacement of existing unserviceable Top of Table bedside with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round table top, complete all as specified and directed. |
| 133 | M&L for replacement of back side of Table bedside made out of 06mm thick BWR plywood commercial best quality, complete all as specified and directed. |
| 134 | M&L for replacement of upper drawer of Table bedside made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as directed by Engr-in-Chage. |
| 135 | M&L for replacement of bottom drawer of Table bedside wtih new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as specified and directed. |
| 136 | M&L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE shoe, complete all as specified and directed. |
| 137 | M&L for replacement of existing unserviceable sides of Table bedside with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as specified and directed. |
| 138 | S&F in repairs telescopic chennel of 10\"\" size shall be provided for smooth functioning of drawers of table bedside as per drg and as directed by Engr-in-Charge. |
| 139 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge.(For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughlyto the table bedside steel. (For Steel Surfaces). |
| 140 | TABLE CENTER FD-274Removing of old unserviceable top from Table Center and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 141 | Replacement of old unserviceable leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak to table centre duly french polished all as shown on drawing complete all as specified and directed by Engineer-in-Charge. |
| 142 | All as per Srl item No. 141.00 here-in-before but long rail, complete all as specified and directed. |
| 143 | All as per Srl item No. 141.00 here-in-before but short rail, complete all as specified and directed. |
| 144 | All as per Srl item No. 141.00 here-in-before but stiffener of table centre, complete all as specified and directed. |
| 145 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 146 | TABLE DINING 6/ 8 PERSONS FD-239/273/376/1115/FD/E6/MAP/03Removing of old unserviceable top from table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed for table dining 8 persons |
| 147 | All as per Srl item No. 146.00 above but for Table dining 6 pers |
| 148 | All as per Srl item No. 146.00 above but S&F new leg made of 1st class hard wood |
| 149 | All as per Srl item No. 146.00 above but long rail for Table Dinging 8 Person |
| 150 | All as per Srl item No. 146.00 above but long rail for Table Dinging 6 Person |
| 151 | All as per Srl item No. 146.00 above but short rail |
| 152 | All as per Srl item No. 146.00 above but support stiffner |
| 153 | S&F new bracket of size 100 x 100 x 30mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as specified and directed by Engr-in-charge |
| 154 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 155 | TABLE DRESSING GENTS WITH MIRROR MAP Removing the existing unserviceable sides and supply & fix new left side made of 18mm MDF board bonded with phenol formaldehyde resin, exterior grade-II both side teak colour as shown on drgs and directed by Engr-in-charge. |
| 156 | Removing the existing unserviceable hinges and supply & fix new Piano typehinges of stainless steel all as shwn on drgs and as directed by Engr-in-charge. |
| 157 | Removing the unserviceable mirror and supply & fix new mirror of 5mm thick all as specified and shown on drgs. |
| 158 | Removing the existing unserviceable glass shelf and supply & fix new glass shelf of 5.0mm thick all as shwn on drgs and as directed. |
| 159 | Removing the existing unserviceable/ broken complete magnetic catcher set and supply & fix new complete magnetic catcher set all as shown & specified on drgs and as directed by Engr-in-charge. |
| 160 | Removing the existing unserviceable back side of mirror and S&F new back side made of 6mm commercial plywood all as shwn on drgs and as directed. |
| 161 | Removing the existing unserviceable back side of cabinet and S & F new back side made of 12mm commercial plywood all as shwn on drgs and as directed.Note : Unit rate quoted for all the above items shall be deemed to include for connected minor repairs wherever necessary and polishing of table dressing gents with mirror. |
| 162 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 163 | TABLE DRESSING LADIES (FD/MAP-II/07)M&L for replacement of broken/ damaged mirror including frame of Table dressing ladies with new one mirror of 05mm thick of size as shown on drg of approved quality fixed to wooden frame, complete all as directed by Engineer in charge. |
| 164 | M&L for replacement of back side of mirror of Table dressing ladies made out of 06mm thick BWR plywood commercial for frame of best quality, complete all as specified and directed. |
| 165 | M&L for replacement of hard wood support member of size 45 x 35 x 1520mmfor mounting mirror of Table dressing ladies made out of teak wood of best quality, complete all as specified and directed. |
| 166 | M&L for replacement of existing unserviceable Top of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round table top, complete all as specified and directed. |
| 167 | M&L for replacement of drawer of Table dressing ladies made out of out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as directed by Engr-in-Chage. |
| 168 | M&L for replacement of existing unserviceable shutter of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round, providing one CP Handle of best quality complete all as specified and directed. |
| 169 | M&L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE DRESSING LADIES with GI screw, complete all as specified and directed. |
| 170 | M&L for replacement of existing unserviceable sides of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as specified and directed. |
| 171 | M&L for replacement of existing unserviceable back of the box of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as specified and directed. |
| 172 | M&L for replacement of existing unserviceable bottom of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as specified and directed. |
| 173 | M&L for replacement of existing unserviceable magnetic catcher with new one of best quality complete all as specified and directed. |
| 174 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 175 | TABLE DRESSING GENTS WITH MIRROR - FD-230Removing of old unserviceable looking mirror from table dressing gents with mirror and supplying and fixing new looking mirror of size 750 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete in all respect to fix on wall all as shown on drawing complete all as specified and directed. |
| 176 | Removing old broken/ unserviceable sunmica from the top of table dressing gents and S&F new 1.5mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed. |
| 177 | Removing old broken/ unserviceable sunmica from the drawer of table dressing gents and S&F new 1.5mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed. |
| 178 | Removing old broken/ unserviceable knob from table dressing gents and S&F new 40mm size CP brass knob as per sample, shape and size shown in drawing complete all as specified and directed. |
| 179 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 180 | TABLE WRITING:-FD-33, FD-275Removing of old unserviceable top from Table Writing and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make : Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed. |
| 181 | Replacement of Legs of to be made out of Ist class Teak wood well seasoned and fixed as per drg complete all as specified and directed. |
| 182 | Replacement of Stiffener, to be made out of Ist class Teak wood well seasoned complete all as specified and directed. |
| 183 | Replacement of side/ Door Shutters to be made out of 18mm thick exterior grade pre-laminated particle boardcovered with all round 4mm thick teak wood beading and duly fixed with knobs and piano type hinges 4mm thick with 4 lever 40mm brass lock complete all as specified and directed. |
| 184 | Replacement of back of table writing which shall be made out of 06mm thick commercial ply wood ISI marked, complete all as specified and directed. |
| 185 | Replacement of Drawers of table writing to be made out of 18mm thick exterior grade pre-laminated particle board ISI marked and 4mm thick beading teak wood to be fixed and provided one knob complete all as specified and directed. |
| 186 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 187 | Table computerFD/E6/MAP/03Removing of old unserviceable top from Table Computer and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make : Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 188 | Removing of old unserviceable bottom from Table Computer and fixing the new bottom of same size made out of 18mm thick exterior grade pre-laminated particle board with all round PVC edging all as shown on drawing and as directed. |
| 189 | All as per Srl item No. 188.00 here-in-before but vertical board on side of Table computer. |
| 190 | All as per Srl item No. 188.00 here-in-before but keyboard tray of Table computer. |
| 191 | All as per Srl item No. 188.00 here-in-before but drawer of Table computer. |
| 192 | All as per Srl item No. 188.00 here-in-before but pull out mouse tray of Table computer. |
| 193 | Removing of old unserviceable telescopic channel of key board and supply and fixing new stainless steel telscopic channel to Table computer, complete all as specified and directed. |
| 194 | S&F new Nylon buffers to Table Computer all as shown on drawing complete all as specified and directed. |
| 195 | S&F new knobs to Table Computer all as shown on drawing complete all as specified and directed |
| 196 | Welding to broken joints of table complete all as specified and directed. |
| 197 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughlyto the table computer steel. (For Steel Surfaces). |
| 198 | TEAPOY FD-34/232/278/382Removing of old unserviceable top from Teapoy and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make : Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed |
| 199 | All as per Srl item No. 198.00 above but leg made of 1st class hard wood |
| 200 | All as per Srl item No. 198.00 above but long rail |
| 201 | All as per Srl item No. 198.00 above but short rail |
| 202 | All as per Srl item No. 198.00 above but stiffner |
| 203 | S&F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 204 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 205 | TEAPOY VERANDAHFD-255Removing of old unserviceable top from Teapoy Verandah and supply and fixing new top made out of 18mm thick Prelaminated board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make - Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed |
| 206 | Replacement of unserviceable flat iron frame with FI 25 x 5mm thick of required size as per drg. The fixing and finishing shall be done in accordance with drawing specifications complete all as specified and directed. |
| 207 | Welding to broken joints of Teapoy verandah complete all as specified and directed. |
| 208 | S&F in replacement PVC shoes to Teapoy verandah complete all as shown on drg complete all as specified and directed |
| 209 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge.(For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughlyto the table computer steel. (For Steel Surfaces). |
| 210 | TEAPOY VERANDAH (MAP) FD/E6/MAP/17Removing of old unserviceable top from Teapoy Verandahand supply and fixing new top made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make - Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed |
| 211 | Welding to broken joints of Teapoy verandah complete all as specified and directed. |
| 212 | S&F in replacement PVC shoes to Teapoy verandah complete all as shown on drg complete all as specified and directed |
| 213 | Removing of old/ unserviceable jali from existing Teapoy Verandah and S&F new Jali duly black painted to Teapoy Verandah complete all as shown on drawing complete all as specified and directed |
| 214 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughlyto the table computer steel. (For Steel Surfaces). |
| 215 | TV TROLLEY - FD/E6/MAP/04Removing of old broken glass shutters from TV trolley and S&F of new shutters made out of 5.5mm thick acrylic sheet duly fixed with stainless steel fitting including magnetic catcher to existing TV trolley. All as per size and design shown on drg complete all as specified and directed/ approved by Engr-in-charge. |
| 216 | Removing of old/ broken swivel type castors from bottom of TV trolley and S&F of new 50mm dia swivel type castors wheel to TV trolley complete all as specified and directed. |
| 217 | Removing of old unservicable/ broken top of TV Trolley and fixing new top made out of 18mm thick BWR plywood with both sided lamination of colour/ shade as approved by Engr-in-Charge/ GE. |
| 218 | Removing of old unservicable/ broken bottom of TV Trolley and S&F of newone made out of 18mm thick BWR plywood with both sided lamination of colour/ shade as approved by Engr-in-Charge/ GE. |
| 219 | All as per Srl item No. 218.00 here-in-before but side of TV Trolley. |
| 220 | All as per Srl item No. 218.00 here-in-before but back of TV Trolley. |
| 221 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
