|
| 1 | Supply, erection & testing of 9 meter hot dip galvanized octagonal pole top 70mm, bottom 155mm thickness 250 x 250 x 163mm with mounted on RCC pedestal as per manufacture foundation nuts & bolts EN-8 grade as per IS1307 including junction box plate IS-2062 made of MS Fe-910 & connected accessories without bracket writing pole nos including taking out old poles any type/size complete all as specified and directed.Note:-Excavation, PCC shall be measured and paid separately under respective item.The octagonal shall be designed to withstand the maximum wind speed as per IS-875 (Part-III)2015. |
| 2 | Supply and fixing energy saving LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum housing toughened glass thermal shock and impact resistance and heat resistant complete with powered by integrad electronice driver with out put short circuit protection, surge protection, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete toughened glass, lens IP 66, IK-08 and with system efficacy of 125 lm/W CRI>70 , PF>0.95 complete all as specified and directed. |
| 3 | Dismantling of U/S high mast pole including light of any type and size complete all as specified and directed. |
| 4 | M & L for errect, test and commissioning of High Mast pole systemconsisting of two section suitable for 55m/s wind speed alongwith head frame, made out of hot dip galvanised steel structure 16Mtrs long, steel wire rope6mm dia 97/19 guage, double drum winch, luminiaries carriage suitable for 06 luminiaries in symmetrical arrangement and 10 watt REDLED aviation lightof make- Bjaj, havells/Philipsand other accesories manufactured in factory with raising lowering system comprising double drum winch, trailing cable, connector, integral power tool motor, manual handle, junction box, lightining finial, (Wiring material from Junction Boxto individual luminiare & MCB in base compartment are not included and are a part of installation), with supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template and outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminiaries and timer switch with all connected accessories for automatic switching of light, power tool control with 2 No 9A contactors and raise lower push button, Incoming 25 sq. mm and out going 2.5sq. mm terminals. 16 M High mast complete all as specified and directed.Note : Foundation bolts manufactured from special steel along with nuts, washeres, anchor plates and templates complete as recommeded by manufacturer or complete all as specified and directed.. (i) The cost ofAviation light, feeder piller box,copper cable 6 core,2.5 Sqmmfrom feeder piller box to 170 Watt LED light deemed to be included in the quoted rate.(ii) The cost for RCC foundation shall be born by the contractor and design should be as per manufacturer recommendations & no extra amount will be paid to the contractor on this account.(iii) Design/drawing for foundation is as per manufactrer approval.(iv) The excavation of soil for RCC work for the foundation deemed to be included in the quoted rate |
| 5 | Item 4.00 contd/…….HIGH MAST SYSTEMMAKE:Shall be approved by GE.Make shall be approved from E-in-C’s Br/Command CE/Zonal CEs.The valid approval letter shall be submitted by the L-1 bidder for approval from GE.Height of mast: 16 MeterNo. of Section : TwoMaterial Construction:E350 Grade as per IS 2062/BS-EN10025Base dia and top diameter (A/F) : Top :150mm Botton :360 mmCross section of Mast : 20 side polygon plate thickness- Top3 mm and Bottom 3 mmStandard for Galvanisation : A per BS EN ISO 1461Size of Opening and door at base :1050 x 250 mmDiameter of base plate: 520 mmThickness of base plate:25 mmLighting protection finial:GI single spike of length 1200mmMax. wind speed : 55m/s as per IS 875 (Part III)Number of foundation bolts: 6NosPCD of foundation bolts: 445mmType / diameter / length of foundation bolts : TS 600/24mm dia/ 850 mm longLUMINAIRES CARRIAGEMaterial of construction:50 NB ERW Class B-M.S PipeDiameter of carriage ring (mm):450 mm (ID)Construction : 06 Arm, Welded, 2 SectionsLoad carrying capacity: 12 LuminaireTRAILING CABLEConductor : Copper,6 core,2.5 SqmmInsulation: PVC FlexibleNo.of circuits per mast :One No cable per mast |
| 6 | Item 4.00 contd/…….WINCH / POWDER TOOLType /SWL of winch : Double drum, SWL 350 Kg Method of Operation:IntegralMotorMotor Capacity: 1.0 HP ( Including suitable starter)No of Speeds:6 Pole, Single speedTorque Limitor:With Mechanical Tripping FacilitySTAINLESS STEEL WIRE ROPEGrade / construction :AISI 316, 7/19 ConstructionNumber of Ropes :Two ContinuousDiameter (mm): 6 mm, 97/19 guage, Breaking load Capacity:1350Kg x 2 |
| 7 | Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, galvanised steel striparmoured, heavy duty cable, 1100 volts grade ISI Marked, laid in trenches, passing through pipes/ducts, on walls with shadel, with stranded aluminium conductor of size 16 Sqmm nominal cross section x 4 core complete all as specified and directed. |
| 8 | Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, galvanised steel striparmoured, heavy duty cable, 1100 volts grade ISI Marked, laid in trenches, passing through pipes/ducts, on walls with shadel, with stranded aluminium conductor of size 10 Sqmm nominal cross section x 2 core complete all as specified and directed. |
| 9 | Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, galvanised steel striparmoured, heavy duty cable, 1100 volts grade ISI Marked, laid in trenches, passing through pipes/ducts, on walls with shadel, with stranded aluminium conductor of size 10 Sqmm nominal cross section x 4 core complete all as specified and directed. |
| 10 | M&LEarthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected togalvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing testpoint all as specified or indicated including testing on completion complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2020. Notes : CONTRACTOR SHALL BE PRODUCE TEST RESULT DATA SHEET ,IF RESULT NOT CAME AS REQUIRED ,HE HAS TO REDONE WITHOUT ANY EXTRA COST. (i) The unit rate includes for 40mm dia medium grade protection pipe and earth lead upto 7.50 meter. (ii) Any variation in length of earth lead and protection pipe beyond 7.5 m shall be measured & paid seperately separately. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional height of watering pipe, bends, elbow etc shall be deemed to be included in the unit rate. |
| 11 | Dismantling of ACSR conductor of any type and size complete all as specified and directed. |
| 12 | Supply and fixing energy saving flood light power by an entegral electronic driver with out put short circuit protection, sugre protection LED flood light made of poly die casting, epoxy powater coated with smooth finishing aluminium housing suitable lens & toughened glass, IP66 with system efficacy of 100lm/W 170 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. andwith all fixing arangement , nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core upto require length,on pole , testing and completion CRI>70, power factor>0.95, complete all as specified and directed at site. |
| 13 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for pole foundation, cable trench, etc and getting out insoft/hard soil OR rock complete all as specified and directed. |
| 14 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed. |
| 15 | Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 16 | M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. Note:- Compacted/punned thickness shall be measured & paid. |
| 17 | Supplying and laying Class LV, Type I, flat, size 250mm x 150mm x 40mm for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed. |
| 18 | S&F 50mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed. |
| 19 | Supply & fix in replacement of 1.2 meter single arm bracket suitable for 9 meter octagonal pole complete all as specified and as directed. |
| 20 | M&L reinforced cement concrete design mix grade M-20 as in foundations, including rafts, footings, foundation beams, plinth beams complete all as specified and as directed. |
