Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavationin trenchesnot exc 1.5 m wide and not exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard / dese soil etc complete all as specified and as directed |
| 2 | Returning, filling in, including spreading, levelling,watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed |
| 3 | Removing excavated soil to a distancenotexc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting pointetc complete all as specified and as directed |
| 4 | M&L for Plain cement concrete(1:4:8)type D-2using 40 mm gradedstone aggregates as in foundations and mass concrete etc complete all as specified and as directed |
| 5 | M&L forCementConcrete(1:3:6)type C-2using 20mm graded stone aggregateas in hold fast and fillingof pressed steel chowkatetc complete all as specified and as directed |
| 6 | M&L for Reinforced CementConcreteDesign Mix M-25grade using 20mm graded stone aggregates as in Foundation, including rafts, footings, plinth beam etc complete all as specified and as directed |
| 7 | M&L for Reinforced cement concrete Design Mix M-25grade using 20mm graded stone aggregates as in slab supported on walls, beam and columns in floors, roofs landing balconies canopies etc complete all asspecified and as directed |
| 8 | M&L for providingReinforcedCementConcrete Design Mix M-25grade using 20mm graded stone aggregates as in beam, cantilevers, bressumers, lintels over 1.5 mtr span etc complete all as specified and as directed |
| 9 | M&L for providing ReinforcedCementConcrete Design Mix M-25grade using 20mm graded stone aggregates as in column, pillars, piers, posts and struts etc complete all as specified and as directed |
| 10 | M&L for Pre-cast cement concrete(1:3:6)type C-1using20mm graded stone aggregate as in solidblock masonry exceeding 10cm in width and setting in cement mortar (1:6)completeall as specified and as directed |
| 11 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; finished fair flat surfaces etc complete all as specified and as directed |
| 12 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) with Rough finished flat surfaces etccomplete all as specified and as directed |
| 13 | M&L forFormwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam with rough finished flat surfaces etc complete all as specified and as directed |
| 14 | M&L forFormwork to sides of pillars, posts, struts, piers, column and stanchions, for square, rectangular or polygonal, rough finished square or rectangularsurfaces etc complete all as specified and as directed |
| 15 | S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type, Ventilators top hung)pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm, windows & ventilator shutter fixed made of glass andgauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, telescopic stays,etc complete all as specified including 12mm square guard bars / grill welded with steel frame 100mm centre to centre horizontically, all as all as per CE Chennai Zone TD drg No 539and as specified and directed.NOTE: (i)Altogether steel frames, steel shutters, Guard bard / Grill, beading, fittings such as handles, hinges, Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. measured as one unit. (ii) Supply only sheet glass and stainless steel wire mesh be measured and paid separately. (iii)Windows/Ventilator work shall be carried out all as per CE Chennai Zone TD drg No 539. |
| 16 | S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), With Particle Board Core, with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face etc complete all as specified and as directed |
| 17 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as directed.(Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 18 | S&FFigured glass 4mm thick, pin head type and glazing with oil putty in squaresnotexc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 19 | S&FStainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed |
| 20 | S&FAluminium anodised towerbolt 200 mm long of extruded section etc complete all as specified and as directed |
| 21 | S&FButthinges100mm size, heavy weight, Stainless steelfixed with screws complete as sepecified and directed |
| 22 | S&FAluminium handle 150 mm size,cast type, anodised etc complete all as specified and as directed |
| 23 | M&L for Mild steel framed work as in grills, grating etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed balusters walks ways, railing framed work of water tanks and similar work etc complete all as specified and as directed |
| 24 | M&L forTMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 25 | M&L forTMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 26 | M&L forTMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 27 | Spreading and levelling in layers not exc 25 cm thick including watering as required etccomplete all as specified and as directed |
| 28 | M&L for Hardcore with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick, wateringand rammed to a true surfac etc all as specified and as directed |
| 29 | M&L forPlain cement concrete (1:4:8) type D-2using 40 mm graded stone aggregatesasin 75 mm thick sub base toflooing etc complete all as specified and as directed |
| 30 | M&L forPlain CementConcrete(1:2:4)type B-0 using 12.5mm graded stone aggregates as in25 mm thick as in sub base toflooring etc completeall as specified and as directed |
| 31 | M&L for Screed bed or bedding layer 15mm thickcement mortar (1:6)for laying floor finishescomplete all as specified and as directed. |
| 32 | M& L for Non Skid ceramic coloured tiles7 to 8mm thick (square / rectangular) area of each tileexc 0.06 sqm but not exceeding 0.11 sqmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 33 | M&LforCementConcrete designer chequered tilesexterior grade, coloured glossyfinish rubber pressed,size 30cm x 30cm x 25mm thickset, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed |
| 34 | M&L for rendering 10 mm thick cement mortar(1:3) on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed |
| 35 | M&L for Glazed ceramiccolouredtilessize 300mmx 450mm, 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified andand as directed |
| 36 | M&L forGranite stone slab 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding the edges half round and polishing to glass finish etccomplete all as specified and directed. |
| 37 | M&L forPCC(1:3:6)type C-1using 20 mm graded stone aggregates as in 75 mm thick plinth protection etc, finished even and smooth without using extra cement including joints filling with sealing compound Grade \"A\" complete all as specified and directed. |
| 38 | M&L for rendering 5 mm thick cement mortar (1:3) on fair faces of concrete ceilingsurface finished even and smooth without using extra cement etc complete all as specified and as directed |
| 39 | M&L for rendering 15 mm thick cement mortar (1:4) on other than fair faces of brick work or concrete surface mixed with water proofing compoundas per manufacture instruction finished even and smooth without using extra cement etc complete all as specified and as directed (Notes : WPC shall be measured and paid seperately) |
| 40 | M&L for rendering 10 mm thick cement mortar (1:6) on fair faces of brick work or concrete surfacefinished and smooth without using extra cement etc complete all as specified and as directed |
| 41 | M&L for Plain cement concrete(1:2:4) type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed |
| 42 | M&L for 10 mm cement plastering in CM (1:3) as in horizontal and vertical surface of RCC roof concrete surface mixed with water proofing compound as per manufacture instruction, finished even & smooth without using etc cementetc complete all as specified and as directed (Notes : WPC shall be measured and paid seperately) |
| 43 | M&L for water proofing treatment to RCC roof slab with following specification all as specified & directed :- (i) Cleaning surface with pressure air jet, removing dust & necessary preparation of surface etc(ii) Applying compatible primer/bonding bitumen @ 0.40 Litr/Sqm for laying APP membrane.(iii) LayingAPP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished overand torch applications of membrane with 75mm side overlap and 100mm end lapcomplete as per manufacturer\"s instructions (iv)Applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete |
| 44 | Supply only Liquid water proofing compound, ISI marked, all as specified & directed |
| 45 | M&L for Preparing newly plastered ceiling surfaceand applying three coat of white wash etc complete all as specified and as directed |
| 46 | M&L for Preparing new plastered suface of walls and applying two coatsof acrylic emulsion distemper, white or tinted over a coat ofself primer etc complete all as specified and as directed |
| 47 | M&L for preparing newly plastered surface of wall and applying two coat of cement base paintover a coat of white wash primer etc complete all as specified and as directed |
| 48 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 49 | S&FCPVC pipes 20 mm outer dia, SDR 11 and plain CPVC SDR 11 fittings concealed in walls/ceiling or laying in floors complete all as specified & directed.Notes : Quoted rate deemed to be included the pipe concealing in wall of any pattern including cutting chasses in brick/concrete wall, making good with PCC/CM. |
| 50 | S&FCPVC pipes25 mm outer dia, SDR 11 and plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors complete all as specified & directed |
| 51 | S&F Rotational moulded PVC water storage tank 1000ltrs capacity conforming to IS-12701(1989) cylindrical vertical type, double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completeall as specified and as directed |
| 52 | S&FRotational moulded PVC water storage tank 2000 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type, double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and as directed. |
| 53 | S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm dia bore etc complete all as specified and as directed |
| 54 | S & FBall float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 25 mm dia bore complete all as specified and as directed |
| 55 | S&F in repairVitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC (SWR) P trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor, fixed complete all as specified and directed. |
| 56 | S&FEuropean Water closet(Ivory colour)pedestal pattern including normal closing seat cover of size 560X530X380mm with S Trap including connection to out going pipe, flushing pipe etc complete all as specified and as directed |
| 57 | S&FPVC dual type flushing cisrern valveless with flushing out valve, low level 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc including PVC connection 450 mm long 15mm dia with PTMT nuts complete all as specifiedand as directed. |
| 58 | S&F Vitreous china wash hand basin, white colourflat back of size 550x400including 32 mm dia chromium plated brass waste fitting, PVC waste pipe 610 mm long andPVC connection 450 mm long 15mm dia PTMT nutscomplete all as specified and as directed |
| 59 | S&F Viterous China urinals, bowl type flat back, size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, beddings urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including 40 mm dia PVC waste pipe 610 mm long andPVC connection 450 mm long 15mm dia with PTMT nuts, flush pipe, grating and Union for discharge pipe etc complete all as specified and as directed |
| 60 | S & FBib taplong body, brasschromium plated with C P flange fixed to water pipe 15mm dia all as specified and as directed. |
| 61 | S & F Pillar tapswan neck type, table mounted chromium plated cast copper alloy,fancy type fixed to water pipe 15 mm dia bore complete all as specified and as directed. |
| 62 | S & FAnglular stopcock cast copper alloy chromium plated,with wall flange screwed down high pressure with capstan head handle screwed both ends, fixed to water pipe 15mm dia boreor for unions etc.,complete all as specified and as directed. |
| 63 | S & F Concealed Stop Cock, cast copper alloy chromium plated, with wall flange screwed down high pressure with capstan head handle screwed both ends, fixed to water pipe 15mm dia boreor for unions etc., complete all as specified and as directed. |
| 64 | S&FOverhead shower 100mm dia ABSwith brass Arm 225mm long & flange including fixing to steel pipe 15mm dia bore or union complete all as specified and as directed. |
| 65 | S&FGlass Shelf 500 X125 mm with brass bracket etc, including guard barcomplete all as specified and as directed.(Make CatNo BEA-45 of Prayag of equlavent make specified in P S herein after) |
| 66 | S&F Soap dish holder with glass tumbler holder etc complete all as specified and as directed |
| 67 | S&F Bevelled edge looking mirror of selected quality of size 600 mm x 450mm x 6mm thick, including cutting holes in mirror for fixing in Walls with tappered screw etc complete all as specified and as directed. |
| 68 | S&FHand shower (Health faucet) (ABS Body) with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as directed |
| 69 | S&F Jet spray brass chromium platedincluding fitting etc complete all as specified and as directed. |
| 70 | S&F Stainless Steel Grab bar Towel rail 450 mm long includingfixing arrangement etc complete all as specified and as directed |
| 71 | S&FPeg set of six, brass chromium plated,fixed in wall as per manufacturers instruction etc complete all as specified and as directed |
| 72 | S&FPVC (SWR) Multi floor trap, 75mm dia outlet,plain with grating including jointing with solvent cement etc complete all as specified and as directed |
| 73 | S&F PVC (SWR)Gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed |
| 74 | S&FPVC, SWR pipes 110mm dia bore, single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed |
| 75 | S&FPVC, SWR pipes 75mm dia bore, single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed |
| 76 | S&FPVC, SWR pipes 110mm dia, single socketed in any length with rubber rings joint fixed with wall with GI clamp etc complete all as specified and directed |
| 77 | S&FPVC, SWR pipes 75mm dia, single socketed in any length with rubber rings joint fixed with wall with GI clamp etc complete all as specified and directed |
| 78 | S&FPVC (SWR) bends (any radius) 110 mm dia boreetc complete all as specified and as directed |
| 79 | S&FPVC (SWR) bends (any radius) 110 mm dia bore with acess door etc complete all as specified and as directed |
| 80 | S&FPVC (SWR) Junction (Single T)equal or unequal 110 mm dia bore etc complete all as specified and as directed |
| 81 | S&FPVC (SWR) Junction (Single T)equal or unequal 110 mm dia with access door etc complete all as specified and as directed |
| 82 | S&FPVC(SWR) bends (any radius) 75mm dia bore etc complete all as specified and as directed |
| 83 | S&FPVC(SWR) bends (any radius) 75mm dia with acess door etc complete all as specified and as directed |
| 84 | S&FPVC (SWR) Junction (Single T)equal or unequal 75mm dia dia bore etc complete all as specified and as directed |
| 85 | S&FPVC (SWR) Junction (Single T)equal or unequal 75 mm dia bore with access door etc complete all as specified and as directed |
| 86 | S&FPVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal 110 mm dia etc complete all as specified and as directed . |
| 87 | S&FPVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal 75 mm dia etc complete all as specified and as directed . |
| 88 | S&FPVC (SWR) vent cowls 110 mm dia bore fixed to vent pipes complete all as specified and as directed . |
| 89 | S&FPVC (SWR) vent cowls 75 mm dia bore fixed to vent pipes complete all as specified and as directed . |
| 90 | Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed |
| 91 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc all as specified and directed. |
| 92 | Demolition of brick work /stone masonry/PCC block masonry built in cementmortar of any description and in any position including wall tiles etc all as specified and directed. |
| 93 | Taking down chowkats or frames with shutters (without taking off shutter from frames) (door and window) not exc. 1.5 sqm each including making good the disturbed surface to match with adjoining surfacesetc complete all as specified and as directed |
| 94 | Taking down chowkats or frames with shutters (without taking off shutter from frames) (door and window) exc. 1.5 Sqm but n exc 4 Sqm eachincluding making good the disturbed surface to match with adjoining surfacesetc complete all as specified and as directed |
| 95 | Taking down steel tubing & connections 15 mm dia bore including gate valves etc complete all as specified and as directed |
| 96 | Taking down steel tubing & connections 20/25 mm dia bore includinggate valves etc complete all as specified and as directed |
| 97 | Taking down EWC / IWC / WHB / Flushing cistern / Urinal etc and removing from site premises etc complete all as specified and as directed |
| 98 | Taking downBib tap/Stop cock/ Angle cock/ Pillar Tap/ Health Faucet of CP/PTMT,Looking Mirror/towel Rail / soap dish /floor Trap with Grating etc complete all as specified and as directed |
| 99 | Dismantling of cast iron or reinforced concrete drain/PVC soil waste pipe up to 150mm dia includingfittings, jointed in cement mortar and taking out from trenchesetc complete all as specified and directed |
| 100 | Dismantling water tanks of capacity 500/1000/2000 ltre capacity including all fittings such as float valve, ball valve etcfittingcomplete all as specified and as directed |
| 101 | Demoltion ofUn-reinforced Cement Concreteof any description and in any position not otherwise specifically provided for including floor tiles , removing the debris to a distance exc 500 mtr but not exc 5.0KM etc complete all as specified and as directed |
| 102 | Demoltion of Reinforced Cement Concrete as in roofs slabs/ floor slab, Column, plinth /Roof/Lintelbeam/ Chajja or any other location of any description and in any position not otherwise specifically provided for incl removing the debries to distance exc 500 mtr but not exc 5.0KM etc complete all as specified and as directed (Notes : After Demoltion of RCC work, Scrap Iron to be stacked seperately and offered as sch of credit.Nothing Extra Shall be admission on this account ) |
| 103 | S&FPVC (SWR) pipes 200mm dia bore, single socketed, in any length with rubber ring jointslaid in trenches or in floors etccomplete all as specified and directed |
| 104 | M&L for Plain cement concrete(1:4:8) type D-2 using 40mm graded stone aggregate as in bed to drain pipes 200 mm dia boreincluding packing under and haunching againstthe sides of pipe after they are laid & testedcomplete all as specified and directed. |
| 105 | M&L for PCC 1:2:4 type B-0 with using 12.50 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 106 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 107 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed. |
| 108 | M&L for Precast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM (1:6) complete all as specified and directed. |
| 109 | Dismantling of Single Layer Mangalore pattern roofing tilin including ridges bedded in cement mortar etc complete all as specified and as directed |
| 110 | Dismantling of Battern for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm etc complete all as specified and as directed |
| 111 | Dismantling timber scantlings 40 sq. cm and over in section, in any position as in framed work etc complete all as specified and as directed |
| 112 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 113 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed |
| 114 | M&L Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed |
| 115 | S&F Steel work in tubular trusses including special shaped washer etc as in col, rafters, purlins etc complete using ERW or induction butt welded or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 etc complete all as specified and as directed |
| 116 | M&L for Second class hard-wood, clean sawn timber framed and fixed in scantlings complete all as specified and as directed |
| 117 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, 150 AZ of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed |
| 118 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick, 150AZof any colour having tensile strength of 550 MPA as in roof covering/cladding ridges under valley to wall, fixed with self tapping screwsetc complete all as specified and as directed |
| 119 | M& Lfor Non - skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) includingdismantling floortiling etc complete all as specified and as directed |
| 120 | M& Lfor Non - skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick backing coat in cement mortar (1:3) includingdismantling wall tiling etc complete all as specified and as directed |
| 121 | M& L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in CM (1:6) includingdismantling floor tiling etc complete all as specified and as directed |
| 122 | M&L for Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over &including backing coat 10 mm thick in CM(1:3) includingdismantlingwall tiling etc complete all as specified and as directed |
| 123 | S&F Factory madepressed steel frame of prifile size 125 X 60 mm for door with one ore more rebate, made with 1.25 mm thick sheetincludings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 124 | S&FFlush shutter35mm thick solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed |
| 125 | S&FFactory made second class hardwood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges offraming plain, chamfered or rounded. fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and as directed |
| 126 | S & FSolid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification complete all as specified anddirected |
| 127 | S&F in repairs 7 to 8 mm profile thickness printedPVC Coloured Sheet (any Shape, coloured, pattern as approved) suitably placed in false ceiling incl making sunken side corner, design as directed etc including grid work made of Aluminium/G.I/M.S as per manufacturer Instruction etc complete all as specified and as directed. |
| 128 | S&F in repairs 7 to 8 mm profile thickness printed PVC Coloured Sheet (any Shape, coloured, pattern as approved)in strips & channelfeathered at the edges for fixing on wall cladding/vertical surface and fixing at site includinggrid work made of Aluminium / G.I / M.S as per manufacturerInstruction etc complete all as specified and as directed. |
| 129 | S&FSheet glass 4mm thick ofordinary quality and glazing with oil putty or wooden beading to wooden frame or steel framein squares not exc 0.50 sqm in each pane complete all as specified and as directed |
| 130 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, length of cover plate 150mm, fixed in floor etc complete all as specified and as directed |
| 131 | S&FAluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed |
| 132 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm,bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed |
| 133 | S & F in repairs Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe 15 mm dia boreand fixed all as specified and as directed |
| 134 | S&F in repairs Unbreakable corner shelf (3Pcs set i.e 8\"-1, 10\"-1 & 12\"-1) with S S guard rail complete all as specified and directed |
| 135 | S&F in repairs PVC Mirror cabinet of size 400x500 mm (Cat No 554 of Prayag or equivalent make) complete all as specified and as directed. |
| 136 | S&F in repairs stainless steel plate rack madeof 0.63mm thickS S sheet, of rack size 800mm x 600mmx 250mmcomplete all as specified and as directed |
| 137 | S & F in repairs Towel rail 600mm long stainless steel glossy finish, fixed on wallscomplete all as specified and as directed. |
| 138 | S&F in repairs Towel ring 200mm diabrass glossy finish,fixed on wallscomplete all as specified and directed |
| 139 | S&F in repairs Health faucet, brass body with 1mtr stainless steelbraided tube & wall hookcomplete all as specified and as directed |
| 140 | S&F in repairs Bib Cock two way,double handle, brass chromium platedwithCPflange all as specified and as directed. |
| 141 | S & FCPVC pipes 20mm outer diaSDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI / CPVC pipe line etc complete all as specified & directed (Notes : Quoted rate includes for cutting grooves for concealing of pipes or cutting holes into stone maosonary wall & making good) |
| 142 | S & FCPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI / CPVC pipe line etc complete all as specified & directed. |
| 143 | S&F in repairs rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top) triple layeredhoisted and fixed in position all as specified in SSR part I including ball float valve25 mm diaborehigh pressure of PTMT with epoxy coated aluminium rod & high density plastic ball etc complete all as specified and directed |
| 144 | S & F in repairsGun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe 25 mm dia bore including taking down old gate valve all as specified and as directed. |
| 145 | M&L for Rendering 15mm thick cement mortar (1:6) on other than fair faces of brick or concrete Surfaces infinished even and smooth without using etc cementcomplete all as specified and directed |
| 146 | M&L for Rendering 20mm thickcement mortar(1:4)in two layer(each coat 10mm thick) on fair faces of brick work or concrete surface mixed with WPCsurfacefinished even and smooth without using extra cement complete all as specified and directed(Note : WPC will be measured & paid seperately) |
| 147 | M & L for Complete removal exising treatment by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface including rubbing and washing etc complete and finishing as per following specification all as specified and as directed :-(i) applying1mm thick wall care putty on wall finishedtosmooth surface(ii) applying a coat of self compatible primer (iii) applying two coats of acrylic emulsion distemper. |
| 148 | M & L for Preparation of new plastered wall surface and finishing as per following specification all as specified and as directed :-(i) applying1mm thick wall care putty on wall finishedtosmooth surface(ii) applying a coat of self compatible primer (iii) applying two coats of acrylic emulsion distemper. |
| 149 | M&L for preparation of new or old plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior grade primer applied @ 0.90 litre/ 10 sqmetc complete all as specified and as directed |
| 150 | M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 151 | S&F in repairsStainless steel decorative curtain rod of 25 mm dia bore includingfancy finale caps cap (02 nos in each curtain rod)etc complete all as specified and as directed |
| 152 | S&F in repairsBrass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of stainless steel flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed |
| 153 | S&F in repairs snap grid frame work for false ceiling with grid suspended system of size 600X600mm with standard section consisting of main runner, cross Teeand wall angle as permanufacturer instruction, ceiling suspended with 3 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee & wall angle of M S galvanized with PPPCGS) including 4 mm thick HPSC self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling etc complete all as specified and as directed |
| 154 | Removing building materials etc. to a distance of exc 100 mtr but not exc 1.00 KM, including loading, unloading and stacking at the destination etc complete all as specified and as directed |
| 155 | Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed. |
| 156 | M & L for Point Wiringwithsingle core PVC insulated unsheathed FRLS cable1.5 Sqmm 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit with accessories concealed type run on walls/ ceiling includingM S terminal boxes fabricated with 1.6 mm thick M S sheet surface mounted / concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, for the following all as specified and as directed :- |
| 157 | One light / fan point controlled by one switch |
| 158 | One 3 pin socket out let 5 Amps on independent board |
| 159 | One 3 pin socket out let 5 Ampson same board |
| 160 | M & L for PointWiringwithsingle core PVC insulated unsheathed FRLS cable 2.5 Sqmm1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit with accessoriesconcealed run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including2.5Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. |
| 161 | Note for Item No 156 & 157 :-(i) The earth wire for the points in the same circuit can be looped from point to point.(ii) Earth wire shall be taken inside the conduit(iii)Cost of terminal box is deemed to be included in the item rate quoted for point wiring.(iv) Cost of a circuit ofany length of cablefrom DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls, in case of recessed or concealed conduit wiring will be included in point wiring. |
| 162 | S&F Batten with luminaire suitable for indoor applications 20 Watts capacity, 4 feet long with extruded aluminiumhousing & integrated LED channelcomplete with all accessories completeall as specified and directed. |
| 163 | S&FSwitch piano flush type, single pole one way 5Amps, 230volts completeall as specified and directed. |
| 164 | S&F Switch SocketCombination2in 1 , 5 Amps flush type 230voltsall as specified and asdirected |
| 165 | S&FSwitch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal type, 230 volts all as specified and asdirected |
| 166 | S&F in repairs MCB SPN 240 volts 32/40 Amps, C curvescomplete all as specified and as directed |
| 167 | S&F in repairsMCB single pole 240 volts 10/16/20/32 Amps, C curvescomplete all as specified and as directed |
| 168 | S&F in repairsMCB Distribution boardSPN 8 way, double door type, 240 volts with 200 Amps rated busbarall as specified and as directed. |
| 169 | S&F in repairsMCB Distribution board,TPN 4 way,double door type 240 volts with 200 Amps rated busbarall as specified and as directed. |
| 170 | S&F in repairs MCB TPN 415 volts 10 KA,\"C\"curves 63 Amps complete all as specified and as directed |
| 171 | S&F in repairsCeiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed |
| 172 | M & L forsub main wiring1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulatedsingle core multistranded copper conductor cable as earth continuity conductor run along with & includingsuitable size of PVC casing caping with accessoriesetc & taking down old wiringall as specified and as directed(Note : Three run of 6sqmm cable and one run of PVC casing caping altogether measured as one unit) |
| 173 | S&F water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all ccessories such as safety valve, thermostat, NRV, connection piece etc.etc completeall as specified and directed at site . |
| 174 | M&L for Earthingwith galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-Iand as specified or indicated including earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre cast slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia TMT bars reinforced at 10 cm centre to centre both ways, funnel with watering pipe, wire mesh and lugs,test pointincluding dismantaling old unserviceableearthingcomplete all as specified and as directed |
| 175 | Supply and fixing in repairsLED bldg securitylight fitting30 Wattswith pressure die cast housing along with prismatic polycarbonate diffuser with IP 66protection complete all as specified and directed. |
| 176 | S&F in repairsBracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including applying two coats of aluminum paintover a coat of red oxide primer complete all as specified and directed. |
| 177 | Supply and fixexhaust fan300mm sweep, steel body AC single Phase, 230Voltswithblades,frame and louvers complete including necessary arrangement for installation all as specified and directed. |
| 178 | M&L for Core cutting in wall/floor for installation of Exhaust Fan 300mm sweep and making good of distrubed wall/floor to match with adjoining surfaceall as specified and directed. |
| 179 | Supply and Fix Modular switch 1 way 6Amps,1 module, 240volts, all as specified and directed. |
| 180 | Supply and fixModular type Fan step regulator, 120W - 2 module, 240volts, all as specified and directed. |
| 181 | Supply and fixModular switch 1 way 16A, 1 module, 240volts,all as specified and directed. |
| 182 | Supply and fixModular Socket, 6A - 2/3 pin combined 2 module, 240volts, all as specified and directed. |
| 183 | Supply and fixModular Socket 6A/16A - 2/3 pin combined 2 module, 240volts, all as specified and directed. |
| 184 | S&F in repairs PVC Fresh Air Fan of 200/225mm sweep 1200/1400 RPM with louvercomplete including necessary core cuttingarrangement for installation all as specified and directed. |
| 185 | S&FWall mounted fans400 mm Sweep with complete accessories, 230 Volts, SPwith BEE 5 Star rating complete with all accessories and fixing the fan on wall with necessary items, etc all as specified and as directed |
| 186 | M & L for sand cushioning under and above the cable all as per Para 19.75 of SSR Part-Icomplete all as specified and as directed |
| 187 | Supply & laying sub class \"B\" burnt bricks for cable protectionall as per Para 19.75 of SSR Part-Icomplete as specified and as directed |
| 188 | Supply & laying XLPE insulated screened PVC bedded galvanised steel strip or wire armoured,electric power cable 4 Core x 25 Sqmm (heavy duty) 1100 Volts grade with stranded aluminium conductor connected with suitable lugs including taking out the existing unserviceable cablecomplete as specified and as directed |
| 189 | S&F in repairs G I tubing medium grade 25 mm bore with all fitting laid in trenches / walls / Roads for cable protectionall as specified and directed. |
| 190 | S&F in repairs G I tubing medium grade 50 mm bore with all fitting laid in trenches / walls / Roads for cable protection all as specified and directed. |
| 191 | S&F in repairs Gun metal Gate valve, with iron wheel head, screwed both ends for iron pipe 25 mm dia all as specified and directed. |
| 192 | S&F in repairs Gun metal Gate valve, with iron wheel head, screwed both ends for iron pipe 50 mm dia all as specified and directed. |
| 193 | S&Fin repairs Float valve of size 20 mm dia with PVC body aluminium float rod, nylon float high pressure type fixed to iron pipe 20mm dia bore all as specified and directed. |
| 194 | M&L for valve pit chamber of inner dimension 100x100x100 cms suitable for sluice valves upto 150mm size with following specification :-(i) Dismantaling old existingvalve pit chamber& Necessary earth work excavation if required.(ii) PCC 1:4:8 type D-2 for foundation of size 1.76x1.76x0.15m(iii) B B masonary 230mm thick wallin CM (1:4), rendering 15mm thick cement mortar (1:4) outer surface & inner surface(iv) MS sheet cover of thickness 3.15mm on 50x50x6 mm angle iron frame work including two coats of synthetic enamelled paint over a coat of red oxide primer with making provision of locking arrangement (v)Coping 50mm thick in PCC 1:2:4 type B-1 includingnecessaryform work etc complete |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
