|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc. or for shafts wells cesspits manholes, pier holes etc and n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed |
| 3 | Returning filling in including spreading levelling watering and well ramming in layers n exc 25cm all as specified and directed |
| 4 | Removing excavated material (soil) to a distance n. exc50 m and depositing where directed at a level n. exc 1.50 m |
| 5 | M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations filling and mass concrete complete all as specified and directed. |
| 6 | M&L for hardcore of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface in broken stone or boulders complete all as specified and directed. |
| 7 | M&L for cement concrete (1:4:8), type D-2 (20 mm graded aggregate) 75mm thick as sub base of floor complete all as specified and directed. |
| 8 | M&L for cement concrete (1:2:4), type B-2 (20 mm graded aggregate), 25mm thick complete all as specified and directed. |
| 9 | Formwork to sides and soffits of floor or roof beams beam haunchings girders bressummers lintels cantilevers shelves including supports overhangs etc. also splays between floors and beams etc. complete all as specified and directed. |
| 10 | M&L for brickwork with subclass \"B\" bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 11 | M&L for damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete (1:2:4) type B-0, 25 mm thick complete all as specified and directed. |
| 12 | S&F of 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 13 | S&F plain 2nd class hardwood 35mm thick framed panelled shutter (one panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 14 | S&F 2nd class hardwood 30mm thick Glazed and skeleton shutters open rebated and prepared to receive glass gauze etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I. Section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed. |
| 15 | S&F 4mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 16 | S&F of 100mm size butt hinges cold rolled steel or stainless steel with screw medium weight ISI marked complete all as specified and as directed. |
| 17 | S&F of 75mm size, butt hinges, cold rolled steel or stainless steel with screw, medium weight, ISI marked complete all as specified and as directed. |
| 18 | S&F 200 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 19 | S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 20 | S&F 150mm Aluminium handles, cast type, anodised complete all as specified and as directed. |
| 21 | S&F 100mm Aluminium handles, cast type, anodised complete all as specified and as directed. |
| 22 | M&L for second class clean sawn soft-wood in scantlings complete all as specified and directed. |
| 23 | S&F for pre-painted galvalume aluminium zinc coating Gl based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 24 | S&F stainless steel toilet jet spray with 1.5m PVC hose pipe and fixed to angle stop cock, fixed in repairs complete all as specified and directed. |
| 25 | S&F in repair Vitreous China one piece European type water closet and making necessary connection to drain or out going pipe fixed on floor complete all as specified and directed. |
| 26 | S & F mild steel work for staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc Fe 410 -W (Gde-E-250) quality-A complete all as specified and directed. |
| 27 | S&F rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 28 | S&F Vitreous China WHB 550 x 400 mm flat back with pedestal including cutting for and pinning in ends of brackets or erecting stand CP Pillar tap 15mm fancy type, CP Waste coupling 32mm, PVC waste pipe 750mm long and brackets complete all as specified and as directed. |
| 29 | S&F 15 mm Brass CP Wash Basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 30 | S&F in repair brass Chromium plated towel rail 20mm dia \"D\" type 600mm long between flanges, Cat No BA-01 of with and including Chromium plated brass screws etc complete all as specified and directed. |
| 31 | S&F in repair PVC cabinet mirror complete all as specified and directed. |
| 32 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 33 | S&F two way CP stop valves/angle cock 15mm bore fancy type chromium plated with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 34 | S&F one way CP stop valves/angle cock 15mm bore fancy type chromium plated with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 35 | S&F 75mm bore PVC (SWR) bends any radius diminishing pieces or tapers with access doors etc, complete all as specified and directed. |
| 36 | S&F 110mm bore PVC (SWR) bends any radius diminishing pieces or tapers with access doors etc, complete all as specified and directed. |
| 37 | S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed. |
| 38 | S & F of 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors/wall complete all as specified and directed. |
| 39 | S&F PVC connection 15mm size with PTMT nuts of length 450mm fixed complete all as specified and directed. |
| 40 | S&F bib taps fancy type chromium plated, 15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 41 | S&F 20mm Ball Valves high pressure of PTMP with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0mm -210gms/25mm-455gms/40mm- 690 gms) complete all as specified and as directed. |
| 42 | S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified |
| 43 | S&F floor trap of PVC 75 mm out let dia with grating and jointed to waste pipe complete all as specified and as directed. |
| 44 | S&F towel Ring of brass chromium plated and including Chromium plated brass screws complete all as specified and as directed. |
| 45 | S&F soap dish any type fixed to plug with chromium plated brass screws complete all as specified and as directed. |
| 46 | S&F 15 mm Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified. |
| 47 | S&F 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size25x25x1.50mm or 25x25x1.25mm at the perimeter including GI6mm Aluminium suspender of required length of any description complete all as specified and directed. |
| 48 | M&L for Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc in 15 mm Screed bed or bedding layer of cement mortar 1:6 laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 49 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed. |
| 50 | M&L for rendering 15mm thick in CM (1:4) using water proofing compound as per manufacturer\"s instruction in two layers, finished even and smooth surface without using extra cement external Plaster (WPC measured and paid separately) complete all as specified and directed. |
| 51 | Supply only integral water proofing compound. |
| 52 | M&L for 3mm thick wall care putty and applying 2 coats of distemper oil emulsion complete all as specified and as directed. |
| 53 | M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed |
| 54 | M&L Glazed ceramic coloured tiles (Designer) in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 backing coat for fixing wall tiles complete all as specified and as directed. |
| 55 | M&L for cement concrete type C-2 1:3:6 (40mm graded aggregate) 75 mm thick as in plinth protection complete all as specified and directed. |
| 56 | M & L for applying two coat of synthetic enamel paint of approved tint on steel and iron surfaces of any description over 10 cm width or girth not otherwise described over a coat of red oxide complete all as specified and directed. |
| 57 | M&L for Reinforced Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 58 | Formwork to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work; n exc 200mm thick (Horizontal or Sloping) complete all as specified and as directed. |
| 59 | S & F Mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm die or securing with clips quality complete all as specified and directed. |
| 60 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-I smooth finished, and reforming benching as required for 150mm bore complete all as specified and directed. |
| 61 | Demolition of brickwork or stone/boulder masonry, built in cement mortar complete all as specified and as directed. |
| 62 | M&L for applying two coats of synthetic enamel paint with a coat of pink primer including cleaning dusting of new or previously untreated wood of plywood base surfaces for wall, door, window, ventilator and ceiling not otherwise described over 10cm width or girth complete all as specified and as directed. |
| 63 | M & L for 10 to 12 mm thick 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed. Note: - Frame work shall be measured & paid separately. |
| 64 | M&L excavating in trenches, n exc 1.5 m wide, exc 1.5 m butn exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/Loose soil complete all as specified and directed |
| 65 | M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth with water proofing compound (without using extra lime or cement) complete all as specified and directed. |
| 66 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 67 | M&L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over primer including 1 mm thick wall care putty, white or tinted complete all as specified and directed. |
| 68 | M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or otherconnecting plates complete all as specified and directed |
| 69 | M&L Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 70 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed |
| 71 | M&L 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base of floor complete all as specified and directed |
| 72 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingincluding 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 73 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in cement mortar 1:4 backing coat for fixing complete all as specified and directed. |
| 74 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 75 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 76 | M&L RCC M-25 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 77 | M&L RCC M-25 in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 78 | M&L RCC M-25 in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 79 | M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed, |
| 80 | M&L for pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed, |
| 81 | M&L 35mm thick 2nd class soft wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed, |
| 82 | S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250 mm size complete all as specified and directed. |
| 83 | M&L Steel windows (Box Type) with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 84 | S&F mild steel chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed, |
| 85 | S&F Sheet glass, 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 86 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, of any description including necessary scaffolding etc complete all as specified and directed. |
| 87 | M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 88 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 89 | M&L for brickwork with old size, subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 90 | M&L 20mm GI steel Tubes, \"Medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 91 | S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 92 | S&F 15mm dia Brass CP Sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 93 | S&F in repairs 15mm dia chromium plated fancy type concealed Stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 94 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 95 | M&L for cement concrete 1:3:6 type C-1, 20mm graded stone aggregate as bed block to hold fast block and other similar works etc |
| 96 | S&F 30mm thick glazed and skeleton shutters for window & ventilator open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.24 (b) in 2nd class soft wood complete all as specified and directed. |
| 97 | S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 98 | M&L for precast reinforced cement concrete type B1, 1:2:4 cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed. |
| 99 | Material & Labour for Complete removal of existing treatment of walls washing down and stopping of distempered and painted surfaces by using electrical operated grinder and applying two coat of oil bound distemper on wall surface over a coat of primer including 1 mm thick wall care putty to give uniform and smooth surface complete all as specified and directed. |
| 100 | M&L 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 101 | M&L concrete bed of cement concrete 1:4:8 Type D2 to 150mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete complete all as specified and directed. |
| 102 | S&F PVC (SWR) pipes 150mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors. complete all as specified and directed. |
| 103 | M&L for cutting hole n exc 150 sqcm in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete complete all as specified and directed. |
| 104 | S&F 2nd class sort wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame with secret nails as in wall panelling 15mm including cornices and beading as required and applying two coats of varnish over a fillet coat of thin varnish after preparation of surface complete all as specified and directed. |
| 105 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 106 | Refixing of Shutters in same opening after necessary repairs of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 107 | S&F 100mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 108 | M&L for excavating in post holes, soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 109 | M&L for cement concrete 1:2:4, type D-2 (40mm Graded aggregate) in foundations, filling and mass concrete Complete all as specified and directed. |
| 110 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade over 25mm sand cushioning Complete all as specified and directed. |
| 111 | M&L 100mm thick Cement concrete type C-2,1:3:6 (40mm graded aggregate) Complete all as specified and directed. |
| 112 | Rough excavation not exc 1.5 mtr deep and getting out soft/Loose soil complete all as specified and directed. |
| 113 | Excavating over areas, exc 30cm deep, and getting out in soft/Loose soil complete all as specified and directed. |
| 114 | M&L for walling of random rubble, coursed, well bonded, bedded and solidly hearted, built in Cm 1:4 Complete all as specified and directed. |
| 115 | M&L for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed. |
| 116 | M&L for providing, cement concrete 1:2:4 type B-1 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided in , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 117 | M&L for providing precast cement concrete 1:3:6 Type C1 (20mm graded aggregate) as in bonders for stone walling and set in cement mortar 1:4 complete all as specified and directed. |
| 118 | M&L for boulder filling dry, hand packed tightly ant thickness at back of wall etc and raising or lowering to required level complete all as specified and directed. |
| 119 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4complete all as specified and directed. |
| 120 | M & L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in surface channels, drains including formwork complete al l as specified and directed |
| 121 | M&L extra for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement, including forms, moulds etc complete all as specified and directed. |
| 122 | M& L PCC 1:3:6 type C-2 as in foundation of posts and struts complete all as specified and directed. |
| 123 | M & L for 10 mm dia MS round bar for fixing of chain link fencing with post complete all as specified and directed. |
| 124 | M & L for mild steel FI 40x5mm for fixing chain link fencing with RCC post and MS round bar 10 mm dia for inserting in mesh including hooking etc complete all as specified and directed. |
| 125 | S & F 10mm dia 50mm long MS screw bolt machine made with hexagonal or Square head at one end and screwed the other, screwed end fixed with washer complete all as specified and directed. |
| 126 | S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails including securing or tying with and provision of galvanised MS wire staples or steel pins etc complete all as specified and directed. |
| 127 | Supply only chain link fencing, galvanised mild steel of mesh 100x100mm size,10 gauge complete all as specified and directed. |
| 128 | Fixing only chain link fencing, including line wires 75x75 mesh, 10 gauge galvanised mild steel to any type of standards, rails, straining bolts, etc. complete all as specified and directed. |
| 129 | M&L two coats of synthetic enamel paint over red oxide n.exc 10 cm width/girth on steel surface including preparation of surface complete all as specified. |
| 130 | S & F mild steel ISA or angle as in posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc conforming to Fe 410or Fe 310 complete all as specified and directed. |
| 131 | M&L for providing and fixing concertina coil fencing with punch tape concertina coil 600 mm dia having 10 round/ RM upto 4 mtr height of wall with angle iron \"Y\" shape complete all as specified and directed. Note:- angle iron measured and paid separately. |
| 132 | Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one wayswitch using1.5 sqmm nominal cross sectional areamultistrandedcopper conductor ,PVC insulated unsheathedFRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSHPVC insulated unsheathed earth wire and connecting to earth dollywithandincluding1.6mm thickcadmiumplatedsunkMS pressedsteelterminalboxeswith 3.0mmthickhylamsheetcover fixedwithbrassscrewcomplete withallaccessoriesforonlight point/ Fan point controlled by one, 1-Way switch complete all as specified and directed. |
| 133 | All as per itemNo 132mentionedhere-in- abovebut one 5 pin 5 Amps socket out let on independent boardwith 1.5 sq mmPVC insulated copper conductor for continuous earthing complete all as specified and directed. |
| 134 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 135 | M & L for Switch socket combination 2 in 1, 3 pin, 6 Amps flush complete all as specified and directed. |
| 136 | M & L forceiling rose, PVC/Polycarbonatethree terminalscomplete all as specified and directed. |
| 137 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 138 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 139 | S & F of exhaust fan 250 mm Sweep with louver shutters, Plastic exhaust fan AC 230V, 50 Hz with fixing arrangement and connection complete all as specified and directed. |
| 140 | M & L sheet metal enclosure for DBs 8 way double door type with 200amps rated busbar SPN including necessary connection complete all as specified and directed. |
| 141 | S&F MCB\"s single pole 240 volts 6 to 32Amps 10 KA \"C\" series complete all as specified and directed. |
| 142 | S&F MCB single pole & neutral 40 to 63 Amps 230 Volts \"C\" series, 10 KA complete all as specified and directed. |
| 143 | S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension ire one twin core flat cable of circular of size 16 sqmm complete all as specified and directed. |
| 144 | M&L earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary excavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI wire 4 mm dia bolted and riveted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe with all fittings from top edge of earth plate complete as specified and as shown in electrical plate no 5 |
| 145 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 146 | M&L for sub main wiring with twosingle core2.5 Sqmm PVC (FRLSH) insulated multistrandedflexible copperconductorcable 660/1100 volts grade downin throughnon metallicPVC casing capingwith and includingPVC insulated 2.5 Sqmsinglecore singlestrand copperconductoras continuous earth wire in greencolour connected to commonearth dolly complete all as specified and directed. Note :- Two runs ofcable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit. |
| 147 | S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm diaGI suspension ire one twin core flat cable of circular of size 10 sqmm complete all as specified and directed. |
| 148 | Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed. |
| 149 | M & L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, drawn through PVC casing caping/ PVC Conduit of suitable size (as per site requirement) including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, modular metal flush boxes (metal switch board of any type and size) with modular metal frame plate and white cover for housing switch required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed. |
| 150 | (a) One light /one fan/one bell point controlled by one switch. |
| 151 | (b) One socket outlet 5 pins 5 amps controlled by one switch on same board. |
| 152 | (c) One socket outlet 5 pins 5 amps controlled by one switch on independent board. |
| 153 | All as per item No 2herein before but wiring with 2.5 sqmm copper wire ( FRLSH)and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. |
| 154 | S&F Modular switch 1way 6A, 1 module complete all as specified and directed. |
| 155 | S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 156 | S&F Modular switch 1way 16A, 1 module complete all as specified and directed. |
| 157 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 158 | S&F Voltage stabilizer for automatic operation, three phase naturally oil cooled indoor type & designed for input variation between 340 V to 460 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 100 KVA complete all as specified and directed. |
| 159 | Earthing complete with galvanised steel earth plate electrode (600x600x6)mm thick buried vertically in ground 3 meter belownormal ground level with top edge of the plate, not less than 2.25 metre below normal ground level connected to GI strip of size 32x6mmby means of bolts, nuts and washers protected by GI tubing light grade 40 mm dia upto Test point 20 mm dia watering pipe with funnel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm graded stone aggregate chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No 3 of SSR Part-I including earth work in any type of soil, removal of surplus soil and providing charcoal dust & salt layers all around the earth plate upto 15 cm complete all as specified and directed. (note: Upto 7.5 Mtr length of pipe of 40 mm dia and GI strip shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5 mtr or test point will be measured separately under respective item. |
| 160 | Supply, Laying , jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizesand aluminium lugs for connection complete all as specified and directed of 70 Sqmm 4 core complete all as specified and directed. |
| 161 | M&L for Cutting of existing steel tubing for alteration or additions and insertion of Tee 20x20x20mm, union, socket complete all as specified and directed. |
| 162 | S&F GI water tubing 20mm bore \"medium grade\", galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed complete all as specified and directed. |
| 163 | S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 20mm complete all as specified and directed. |
