|
| 1 | Demolition ofcement concrete (unreinforced) of any description and in any position not otherwise specifically provided for edging of footpath and removal of rubbish off the site complete all as specified and directed. |
| 2 | Dismantling of Stone slabs and tiles of any description or thickness in floors laid in dry and ponted etc. complete all as spd and directed. |
| 3 | Demolition ofcement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed. |
| 4 | M&L for hardcore broken stone aggregate of gauge not exceeding 63 mm of brokenstone, deposited, spread and levelledlayers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 5 | M&L for Plain cement concrete type D2 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundation and mass filling, complete all as specified and directed. |
| 6 | M&L for Plain Cement concrete of Type C-1, 1:3:6 ( 20 mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed. |
| 7 | M&L for forming fair finish drain channel inner girth not exc30 cm in cement concrete using extra cement complete all as specified and directed. |
| 8 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 9 | M&L for Machine pressed precast concrete interlocking pre-polished paver block (coloured) any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, complete all as specified and as directed. |
| 10 | M&L for refixing of old machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment complete all as specified and directed. |
| 11 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including marking joints with or without grooves (thickness of joints except at sharp curve shall not more that 5mm), including making drainage opening wherever required complete as specified and as directed. |
| 12 | Supplying and laying of PVC underground drainage sewer system pipe bearing 160 mm dia SN 4 including jointing with couplar, bend tee as per site requirement complete laid in trenches or floors complete all as specified and directed. |
| 13 | M&L for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm width or girth and applying two coat of water based floor coat paint emulsion over one coat of self priming coat emulsion by diluting with 30% to 40% watercomplete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for preparing existing old machine-pressed precast concrete interlocking paver block surfaces. Work includes thorough cleaning by steel wire brushing and sandpapering, scraping down smoke, soot, moulds, moss, and efflorescent salts. Treatment of oil and greasy spots with appropriate chemical degreasers as required. Surface must be made dust-free and dry before applying two coats of Low VOC Acrylic Lacquer Polish/Coating (VOC content < 50 g/L) to achieve a uniform high-gloss \"wet look\" finish. All work to be completed as per manufacturer specifications and directed by the Engineer-in-Charge. |
| 15 | Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
