Name of Work: Provision of retrofit emission control devices (RECD)on DG sets of various capacitiesunderAE(E&M)-I Central Zone MCD .
Sl. No.
Item Description
1
Supply installation testing and commissioning ofRetrofit EmissionControl Device (RECD), applicability for phase I Gensetof Capacity30 Kva to reduce particulate Matter (PM), Hydrocarbon and carbon monoxide emission bynot less than 70% in 5 mode D2 cycle. workingtechnology of RECD should be based on Catalytic conversion technology and outer casing of RECD should be made of SS-409. The RECD should be type approvedas per the system and procedure of central pollution Control Boardfor emission Compliance testing of Retro fit emission control devices (RECD) for diesel power Generating set engine dated 01/02/2022, vide pollution control series PCLS/12/2021-22. RECD to be type tested for equivalent Kva rating from any one for the central pollutioncontrol board, Govt of india recognized/ approved test agencies as given below Kva rating from any one for the central pollutioncontrol board, Govt of india recognized/ approved test agencies as given below: (a) Automotive Research Association of India (ARAI, Pune) (b)International Centrefor Automotive testing (ICAT Manesar (c)India Institute of petroleum (IIP Dehradun) (d) Vehicle research Development Establishment (VRDE, Ahmadnagar). Note:- RECD should not consume additional electricity/power either from the main supply or DG set for emission reduction, RECD should installed on top of the DG sets, with available space complete all as required at site
2
Supply installation testing and commissioning ofRetrofit EmissionControl Device (RECD) applicability for phase II Gensetof Capacity 82.5 Kva to reduce particulate Matter (PM), Hydrocarbon and carbon monoxide emission bynot less than 70% in 5 mode D2 cycle. workingtechnology of RECD should be based on Catalytic conversion technology and outer casing of RECD should be made of SS-409. The RECD should be type approvedas per the system and procedure of central pollution Control Boardfor emission Compliance testing of Retro fit emission control devices (RECD) for diesel power Generating set engine dated 01/02/2022, vide pollution control series PCLS/12/2021-22. RECD to be type tested for equivalent Kva rating from any one for the central pollutioncontrol board, Govt of india recognized/ approved test agencies as given below: (a) Automotive Research Association of India (ARAI, Pune) (b)International Centrefor Automotive testing (ICAT Manesar (c)India Institute of petroleum (IIP Dehradun) (d) Vehicle research Development Establishment (VRDE, Ahmadnagar). Note:- RECD should not consume additional electricity/power either from the main supply or DG set for emission reduction, RECD should installed on top of the DG sets, with available space complete all as required at site
3
Supply installation testing and commissioning ofRetrofit EmissionControl Device (RECD)applicability for phase I Gensetof Capacity125 Kva to reduce particulate Matter (PM), Hydrocarbon and carbon monoxide emission bynot less than 70% in 5 mode D2 cycle. Workingtechnology of RECD should be based on Catalytic conversion technology and outer casing of RECD should be made of SS-409. Monitoring system of RECD shall have touchable digital display.The RECD should be type approvedas per the system and procedure of central pollution Control Boardfor emission Compliance testing of Retro fit emission control devices (RECD) for diesel power Generating set engine dated 01/02/2022, vide pollution control series PCLS/12/2021-22. RECD to be type tested for equivalent Kva rating from any one for the central pollutioncontrol board, Govt of india recognized/ approved test agencies as given below: (a) Automotive Research Association of India (ARAI, Pune) (b)International Centrefor Automotive testing (ICAT Manesar (c)India Institute of petroleum (IIP Dehradun) (d) Vehicle research Development Establishment (VRDE, Ahmadnagar). Note:- RECD should not consume additional electricity/power either from the main supply or DG set for emission reduction, RECD should installed on top of the DG sets, with available space complete all as required at site
4
Supply installation testing and commissioning ofRetrofit EmissionControl Device (RECD) applicability for phase I Gensetof Capacity 180 Kva to reduce particulate Matter (PM), Hydrocarbon and carbon monoxide emission bynot less than 70% in 5 mode D2 cycle. workingtechnology of RECD should be based on Catalytic conversion technology and outer casing of RECD should be made of SS-409.The RECD should be type approvedas per the system and procedure of central pollution Control Boardfor emission Compliance testing of Retro fit emission control devices (RECD) for diesel power Generating set engine dated 01/02/2022, vide pollution control series PCLS/12/2021-22. RECD to be type tested for equivalent Kva rating from any one for the central pollutioncontrol board, Govt of india recognized/ approved test agencies as given below: (a) Automotive Research Association of India (ARAI, Pune) (b)International Centrefor Automotive testing (ICAT Manesar (c)India Institute of petroleum (IIP Dehradun) (d) Vehicle research Development Establishment (VRDE, Ahmadnagar). Note:- RECD should not consume additional electricity/power either from the main supply or DG set for emission reduction, RECD should installed on top of the DG sets, with available space complete all as required at site
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
