|
| 1 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : |
| 2 | 100x60x2.50 mm |
| 3 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 4 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 5 | 300x16 mm |
| 6 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 7 | 150x10 mm |
| 8 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 9 | 125 mm |
| 10 | 75 mm |
| 11 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 12 | Twin rubber stopper |
| 13 | Plain Gypsum plaster board conforming to IS: 2095( Part - I) : 2011 (Board with BIS certification marks) |
| 14 | 12.5 mm thick. |
| 15 | Providing and fixing MSsteel butt hinges (D type) with stainless steel screws etc. complete : |
| 16 | Addition and alteration of double screen flush door (wt>35kg)by welding with Electric welding machine/gas plant including welding rod,transportation of welding machine at site & other required T&P is to be arranged by Agency. (MS sections if required shall be paid for separately). |
| 17 | Addition and alteration of doors and windows (Steel /aluminium/ pvc) at site with welding of hinges, sawing and repairing edges including change of rubber etc. and repairing of sides & jambs if required for their smooth functioning etc as directed by Engineer-in-charge. All T&P nails etc required for attending the work shall be arranged by the contractor and nothing extra shall be paid for. |
| 18 | Addition and alteration of damaged MDF boardby available good condition MDF board i/c cuttingin proper shape and fixing in MS frame with S.S nails/screws complete as per direction of E-in-C. |
| 19 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 20 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 23 | For fixed portion |
| 24 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 25 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 26 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 27 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 28 | Pre-laminated particle board with decorative lamination on both sides. |
| 29 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 30 | With float glass panes of 5 mm thickness (weight notless than 12.50 kg/sqm) |
| 31 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 32 | With stainless steel cover plate minimum 1.25 mm thickness. |
| 33 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 34 | Dismanteling and refixing of the availablealuminium / sandwitch partition and window asrequired in buildings by cutting and jointing the existing members, making arrangement for door with cutting floor and repairing by cement mortar the floor after fixing floor spring fixing with rawl plug of required dia and size, cutting the board, glass panes of required size to adjust the panel size in the width of room,Aluminium sections shall be jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws , all complete as per the directions of Engineerin-charge. |
