|
| 1 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 2 | 4x16 sq.mm |
| 3 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm |
| 4 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 3x2.5 sq.mm |
| 5 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 6 | Supplying and fixing followinig rating four pole 415V isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 amps |
| 7 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. |
| 8 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 9 | Supplying and fixing of street light pole box of size (250x200x100)complete with all accessories i/c suitable clamps, suitable bakelite sheet, brass screws, washers and 1 Nos. SP MCB 10 amps capacity i/c making connection etc. as required at site. |
| 10 | Servicing of LT panel/ starter panel having 1 Nos. of incomer and 6 Nos. of DOL starter which includes , checking of control circuit , power circuit, relays contactor, busbar tightening , internal connection tightening insulation test of panel, cleaning removal of rust from surface and painting withi one coat of steel primer, two coat of synthetic enamel paint of approved brand and manufacture of required colour to give an even shade etc. complete as required. |
| 11 | Supplying, fixing and laying of one number PVC insulated and PVC sheathed/ XLPE copperconductor unarmoured power cable of 650/1100 KV grade of size 3C x 2.5 sq.mm etc. as required |
| 12 | Supplying, fixing and laying of one number PVC insulated and PVC sheathed/ XLPE copperconductor unarmoured power cable of 650/1100 KV grade of size 4C x 16 sq.mm etc. as required |
| 13 | 4x16 sq.mm |
| 14 | Supply, installation, testing and commissioning of pre wired, 150 watts flood light pressured dia cast aluminium housing with high impact resistance (IK07) glass cover IP66 protection, 130lm/w, 220-240V, 50 Hz connection etc. as required. Philips make CAT No. BVP 192 LED 177 CW NB FG A1 PSU GR or equivalent model of Thorn/ Trilux |
| 15 | Supply, installation, testing and commissioning of prewired 40 watts, IP66/ IK07, Post top lantern light have symmetric light distribution , 220-24V, 50Hz Complete i/c all accessories etc. directly on surface including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor cable and earthing etc. as required. Make Philips Town Glow Post Top ModelCAT No. BGP 200 LED 45 CW PSU GR CPC SPD or equivalent Model of Thorn/ Trilux |
