|
| 1 | MATERIAL WORK |
| 2 | Stone Aggregate(single size): 40+B14:B93 mm nominal size |
| 3 | Stone Aggregate(single size):20 mm nominal size |
| 4 | Coarse sand (zone III) |
| 5 | Portland Cement |
| 6 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 7 | Vibrator (Needle type 40 mm) |
| 8 | Sundries |
| 9 | wall form panel 1250x500 mm |
| 10 | Corner angle 45x45x5 mm 1.50 m long |
| 11 | 100 mm channel shoulder 2.5 m long |
| 12 | Double clip (bridge clip) |
| 13 | Single clip |
| 14 | M.S. Tube 40 mm dia |
| 15 | Twisted steel/deformed bars |
| 16 | Stone Aggregate(single size): 10 mm nominal size |
| 17 | Stone for masonry work |
| 18 | Solid blocks of size 30x20x20cm |
| 19 | Wall form panel 1250x450xmm |
| 20 | Corner angle 45x45x5 mm 2.50 long |
| 21 | Column clamp 450x1070 mm |
| 22 | Prop 2 m (2-3.5m) |
| 23 | Structural steel such as tees, angles, channels and R.S. joists |
| 24 | Red oxide Zinc chromate primer |
| 25 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 26 | Beam clamp 300-380 mm (450-1070 mm) |
| 27 | Second class kail wood in planks |
| 28 | Second class kail wood in scantling |
| 29 | Hollock ballies 125 mm diameter |
| 30 | Adjustable span ESO+SI (2.35-3.40) |
| 31 | Solid blocks of size 30x20x15cm |
| 32 | Mild steel tubes electric resistant or induction butt welded |
| 33 | Mild steel round bar 12 mm dia and below |
| 34 | Flats up to 10 mm in thickness |
| 35 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 36 | Factory made glass reinforced plastic door frame 90x45 mm i/c carriage |
| 37 | 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage |
| 38 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
| 39 | Bright finished or black enameled mild steel screws 40 mm |
| 40 | Bright finished or black enameled mild steel screws 20 mm |
| 41 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 42 | PVC pipe 110 mm outer dia 6kgf/cm2 |
| 43 | PVC pipe 15 mm outer dia 10kgf/cm2 |
| 44 | PVC pipe 32 mm outer dia. 10Kgf/cm2 |
| 45 | PVC pipe 40 mm outer dia. 10kgf/cm2 |
| 46 | PVC pipe 63 mm outer dia . 6kgf/cm2 |
| 47 | PVC vent cowl 63 mm dia |
| 48 | PVC vent cowl 110 mm dia |
| 49 | Brass bib-cock-15 mm dia |
| 50 | PVC Elbow 63 mm dia |
| 51 | PVC 45 degree Elbow 63 mm dia |
| 52 | PVC door Elbow 63 mm dia |
| 53 | PVC bend 63 mm dia |
| 54 | PVC Tee 63x63x63 mm dia |
| 55 | PVC Socket/coupling 63 mm dia |
| 56 | PVC Elbow 110 mm dia |
| 57 | PVC 45 degree Elbow 110 mm dia |
| 58 | PVC door Elbow 110 mm dia |
| 59 | PVC bend 110 mm dia |
| 60 | PVC Tee 110x110x110mm dia |
| 61 | PVC Socket/coupling 110 mm dia |
| 62 | PVC pipe 25 mm outer dia . 12 kgf/cm2 |
| 63 | Vitreous China orrisa type w.c. pan size 580 mm |
| 64 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 65 | 100 mm S.C.I. trap with vent heel |
| 66 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
| 67 | Vitreous china pedestal type wate closet |
| 68 | Vitreous china flat back wash basin 550x400 mm |
| 69 | 15 mm C.P.brass tap |
| 70 | C.P. brass waste 32 mm |
| 71 | C.I. bracket for wash basin and sinks |
| 72 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 73 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 74 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 75 | Fine sand (zone IV) |
| 76 | Vitrified floor tile 60x60 cm |
| 77 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 78 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 79 | Multi surface paint |
| 80 | Special primer (C.W) |
| 81 | Black Japan |
| 82 | Synthetic enamel paint in black or chocolate shade |
| 83 | Mild steel plates |
| 84 | G.I. pipes 40 mm dia |
| 85 | Mild Steel round bar above 12 mm dia |
| 86 | Welding by electric plant |
| 87 | Stainless steel (Grade - 304) hollow section round/square tubes |
| 88 | Stainless steel bolts /square bar and plates |
| 89 | Interlocking C.C. paver block (80 mm thick, M-30) |
| 90 | Stone Aggregate(single size): 06 mm nominal size Please Enable Macros to View BoQ information |
