Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation in hilly area in all heights and depths and in all kind of soil by ordinary rock, hard rock, chieselling, wedging out of rock(where blasting is prohibited) and their intermediate classification of soil, setting out true to the required lines, grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-charge at site according to the MORD technical specification clause 2014 302, 1603.1 and 1603.2 and sorting out useful materials and stacking the same in all leads and lifts on acquired width of road and transportation for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to required width of the road or to approved dumping sites through all modes of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tool and labour if required. Any loss to the public private property during the course to execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all the cases as per the direction of engineer-in-charge including carriage of material with in all leads and lifts. All useful material such as stone, shingle, sand and slates etecetra shall be sorted out. A recovery of 580.45.cum. stone to be obtained from excavation cutting at the rate of Rs. 300.00 (Rupees Three hundred) per cubic metre shall be effected on prorata bases in each running bill for this item. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid separately. |
| 2 | Construction of embankment with approved materials obtained from borrow pits deposited at site from road way cutting excavation of other road structures or other sources laid in layers of suitable thickness not exceeding 200mm( two hundred millimeter) and compacted with 80-100 (eighty-hundred)KN.static/ vibratory road roller to meet the requirements of table 300.1 and 300.2 specifications to lines, grades, level and cross sections as per drawings or directions of the Engineer-in-charge including preparation of foundation for embankment in all kinds and classification of soils including saturated soil and dewatering/ bailing out of water wherever required including handling of materials for construction of embankment within all leads and lifts. The rate shall include carriage of machineries, equipment, tools and materials and safety measures, as per direction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 3 | Construction ofsub grade and earthen shoulderwith approved material obtained from borrow pitsand laid in layers of suitable thickness not exceeding 200mm ( two hundred millimetres) and compacted with 80-100 KN (Eighty to one hundred KiloNewton). static/ vibratory road roller to meet the requirements of table 300.1 and 300.2 of MORD specifications 2014 clause 303 to lines, grades, level and cross sections as per drawings or directions of the Engineer-in-charge including preparation of foundation for embankment in all kinds and classification of soils including saturated soil and dewatering/ bailing out of water wherever required including handling of materials for construction of embankment within all leads and lifts.The rate shall include carriage of machineries, equipment, tools and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects as per direction ofEngineer-in-charge including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 4 | Earth work all kind of soil in excavation for structures such as Retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto any lead, dressing of sides and bottam and back filling in trenches with excavated suitable material. Ordinary soil upto any depth.and as directed by the Engineer-in- Charge at site according to the M.O.R.D. technical specification 2014in association with other clauses.Thecost of all useful material such as stones , shingles and aggregates received from the excavation shall be recoveredfrom the contractorAll the surplus material shall be disposedoff by the contractorat approved dumping locations , to be identified by him at his own level andas per EMPguidelines and approval/ instruction of the Engineer without any additional cost. Any loss to the public / private property during the course of execution shall be theabsolute responsibility of the contractor whichshall have to be duly compensated by him in all cases as per regulations and instructions of Engineer-in-chargeincluding entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 5 | Providing and laying mechanically mixed and vibrated concretefor plain/reinforced concrete in open foundation for all type of structure complete of plain cement concrete nominal mix 1:4:8, {(one cement: four sand : eightgraded crushed stone aggregate 40 mm (Fortymillimetre nominal size)} on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification 2014 Clause 802, 803, 1202 and 1203 as per the direction of the Engineer-in-charge , including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 6 | Filter Media behind abutment, wing wall and return wall complete as per drawings & MORD technical specification 2014 Clause 1604.7 The rate shall include carriage of machineries, equipment, tools and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 7 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm (one hundred millimetres) dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) (one vertical):(twenty Horizontal) towards drawing face complete as per drawing and M.O.R.D. technical specification 2014 clauses 614,709 and 1204.3.7 as per the direction ofEngineer-in-charge , including entire carriage of materials within all leadslifts and other incidentals and as per direction of Engineer-in-Charge. TThe rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 8 | Providing and laying of boulder apron laid in wire crates with 4mm ( four millimetrre ) dia G.I. wire ( Galvanized iron wire) confirming to IS:280 (IS : two hundred eighty ) and IS : 4826 (IS : four thousand eight hundred twenty Six) in 100mmx100mm ( hundred millimetres into hundred millimetres) mesh ( Woven diagonally )including 10% ( ten percent ) extra for laps and joints laid with stone boulders weighing not less than 25kg ( twenty five kilogramme) each and stone spalls as per drawing andM.O.R.D.2014 technical specification 2014 Clause 1301 , 1604 and as per directions of Engineer-in-Charge including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. |
| 9 | Providing and erecting a \"W\" metal beam crash barrier comprising of 3 mm (three milimetre) thick corrugated sheet metal beam rail, 70 cm (seventy centimetre) above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm (one hundred fifty into seventy five into five milimetre) spaced 2 m (two metre) centre to centre, 1.8 m high (one point eight metre), 1.1 m (one point one metre) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 (IS: one thousand three hundred sixty seven) and IS:1364 (IS: one thousand three hundred sixty four), metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm (one hundred fifty into seventy five into five milimetre), 330 mm (three hundred milimetre) long complete asas per MORTH Technical specification Clause 811. The rate shall include carriage of machineries, equipment, tolls and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects as per direction ofEngineer-in-charge including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 10 | Loosening of the ground upto a level of 300 mm (three hundred milimeter) below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 11 | Construction ofGranular Sub-Base by providing well gradedmaterial of nominal maximum size grading 80 mm (eight millimetre) as per table 2.3 (two point three) of IRC SP-72-2008 (IRC-SP-seventy two-two thousand eight), spreading in uniform layerswith tractor mountappropriate grading arrangements on prepared surface , mixing by mix in place method at OMC with tractor mount appropriate rotavator attachment and compaction with three wheel 80-100 KN(Eighty to one hundred kilonewton) static Roller capacity to achieve the desired density complete as per specifications contained in para 2.2 (two point two), 3.6 (three point six), & 3.7 (three point seven) of IRC SP-77-2008 (IRC-SP-seventy seven-two thousand eight) (By Using freshmaterial) and as per MORD specifications andas per the direction of Engineer-in -Chargeincluding entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 12 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing thematerial with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, layingin uniform layers in sub-base/base course on a well prepared sub-base and compacting with smoothwheel roller of 80 to 100kN(Eighty to one hundred kilonewton) weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 andM.O.R.D.Technical Specification Clause 406andas per direction of Engineer-in-charger including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 13 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 (zero point seventy toone point zero ) kilogram per square meterusing mechanical means as per Technical Specification Clause 502. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 14 | Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.25 to 0.30 kg.per sqm(Zero point twenty five to zero point thirty kilogram)per square metre.on the prepared granular surfaces treated with primer and cleaned with Hydraulic broom as per MORD technical specification.clause 503 including carriage of materials within all leads and lifts and other incidential. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 15 | Providing, laying and rolling of close- graded premix surfacing (Mix Seal Surface) material of 20mm thickness composed of 11.2mm to 0.9mm (Eleven point two millimeter to zero ponit nine milimeter) (Type - A) or 13.2mm to 0.9mm (thirteen ponit two milimeter to zero ponit nine milimeter) (Type - B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8 - 10 KN static rollar and finishing to required level and grades as per Technical Specification Clause 509. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 16 | Construction ofpanel concrete, dowel jointed at expansion and construction joint only, plain Panel cement concrete pavement, thickness as per design, over a prepared sub base, with 43 (forty three) grade cement and any other type as per Clause 1501 M30 (M-thirty) Grade, coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm (twenty five millimetre), mixed in a concrete mixer of not less than 0.2 (zero point two) cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and MORD Technical Specification section 1501 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 17 | Panel cutting in concrete pavement in square panels of 1.25M x 1.25M (one point two five metre into one point two fivemetre)( Maximum panel ) sizes sawing in straight line up to 1/3rd (one third) depth from surface including labour and hireage of cutting machine inclusive of taxes under R&D projects in PMGSY. The rate shall include carriage of machineries, equipment, tools, materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 18 | Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C (Plain Cement Concrete) grade M 10 (M-ten) Nominal mix 1:3:6 (one cement:three sand:six aggregate) with 20 mm (Twenty millimeter normal size) . The rate shall include carriage of machineries, equipment, tools, materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 19 | Providing and fixing of typical PMGSY informatory sign board with logo as per M.O.R.D. specifications and drawings. Three M.S. plates of 1.6 (one point six millimetres) thick, top and middle plate duly welded with M.S. flat iron 25mmx5mm ( twenty five into five millimetre ) sizeon back on edges. The lower plate will be welded with M.S. angle iron frame of 25mmx25mmx5mm (twenty five into twenty five into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. (two Nos.) 75mmx75mm( seventy five into seventy five millimetre) of twelve SWG sheet, tubes posts duly embedded in cement conrete M-15 grade (M-fifteen) blocks of 450mmx450mmx600mm( four hundred fifty millimeter into four hundred fifty millimetre into six hundred millimetre), 600mm (six hundred millimetre below ground level, including mechanically mixed and vibrated. The top most diamond plate will be welded to middle plate by 47mmx47mm ( forty seven millimetre into forty seven millimetre)of 12 SWG (twelve SWG) steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, borders etcetera will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and M.O.R.D. technical specifications section 1701 and Annexture1700.1 including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge.The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 20 | Reinforced cement concrete mechanicallly mixedand vibrated, M-15 (M-fifteen) grade Design Mix with cement content not less than 300 Kg/cum (Three hundred killogram per cubic metre)kilometre stone/ local stone of standard design as per IRC : 8 (IRC - eight) Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads Clause 1703(ordinarykilometre stone, precast). including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 21 | Reinforced cement concrete mechanicallly mixed and vibrated, M-15 (M-fifteen) grade Design Mix with cement content not less than 300 Kg/cum (Three hundred killogram per cubic metre) kilometre stone/ local stone of standard design as per IRC : 8 (IRC - eight) Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads Clause 1703[ 200 metres ( two hundred metres) stone, precast].including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 22 | Reinforced cement concrete M -15 (M-fifteen) grade Design Mix with cement content not less than 300 Kg/cum (Three hundred killogram per cubic metre) boundary pillars/localstone of standard design as per IRC:25(IRC - twenty five)fixed in position including finishing and lettering but excluding painting as per drawing and M.O.R.D. Technical Specification Clause 1704 including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 23 | Providing and fixing of Retro-reflectorised Traffic Signs 900x900x900mm triangular (nine hundred into nine hundred into nine hundred milimetre) cautionary, mandatory and informatory sign as per IRC:67 (IRC - sixty seven)made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm (one point five milimetre) thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm (seventy five milimtetre into seventy five milimtre into six milimetre) firmly fixed to the ground by means of properly designed foundation with M15 (M-fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (four hundred fifty milimetre into four hundred fifty milimetre into six hundred milimetre), 600 mm (six hundred milimetre) below ground level as perdrawings and Technical Specification Clause 1701. The rate shall include carriage of machineries, equipment, tools, materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 24 | Providing and fixing of Retro-reflectorised Traffic Signs 600mm circular (six hundred milimetre) cautionary, mandatory and informatory sign as per IRC:67 (IRC - sixty seven)made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm (one point five milimetre) thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm (seventy five milimtetre into seventy five milimtre into six milimetre) firmly fixed to the ground by means of properly designed foundation with M15( M-fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (four hundred fifty milimetre into four hundred fifty milimetre into six hundred milimetre), 600 mm (six hundred milimetre) below ground level as perdrawings and Technical Specification Clause 1701. The rate shall include carriage of machineries, equipment, tools, materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 25 | Providing and fixing of Retro-reflectorised Traffic Signs 600x600x600mm triangular (Six hundred into six hundred into six hundred millimeter cautionary, mandatory and informatory sign as per IRC:67 (IRC - sixty seven)made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm (one point five milimetre) thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm (seventy five milimtetre into seventy five milimtre into six milimetre) firmly fixed to the ground by means of properly designed foundation with M15 (M-fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (four hundred fifty milimetre into four hundred fifty milimetre into six hundred milimetre), 600 mm (six hundred milimetre) below ground level as perdrawings and Technical Specification Clause 1701. The rate shall include carriage of machineries, equipment, tools, materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge.The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 26 | Providing and fixing of Retro-reflectorised Traffic Signs 600x450mm Rectanglar, Chevron (six hundred into four hundred fifty milimetre) cautionary, mandatory and informatory sign as per IRC:67 (IRC - sixty seven)made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm (one point five milimetre) thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm (seventy five milimtetre into seventy five milimtre into six milimetre) firmly fixed to the ground by means of properly designed foundation with M15 (M-fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (four hundred fifty milimetre into four hundred fifty milimetre into six hundred milimetre), 600 mm (six hundred milimetre) below ground level as perdrawings and Technical Specification Clause 1701. The rate shall include carriage of machineries, equipment, tools, materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 27 | Providing and fixing of Hazard Markers 900 X 300mm (nine hundred into three hundred milimetre) cautionary, mandatory and informatory sign as per IRC:67 (IRC - sixty seven)made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm (one point five milimetre) thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm (seventy five milimtetre into seventy five milimtre into six milimetre) firmly fixed to the ground by means of properly designed foundation with M15 (M-fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (four hundred fifty milimetre into four hundred fifty milimetre into six hundred milimetre), 600 mm (six hundred milimetre) below ground level as perdrawings and Technical Specification Clause 1701. The rate shall include carriage of machineries, equipment, tools, materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 28 | Providing and fixing ofRetro-reflectorised Traffic Signs 900mm Octagonal, Stop (nine hundred ,milimetre) cautionary, mandatory and informatory sign as per IRC:67 (IRC - sixty seven)made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm (one point five milimetre) thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm (seventy five milimtetre into seventy five milimtre into six milimetre) firmly fixed to the ground by means of properly designed foundation with M15 (M-fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (four hundred fifty milimetre into four hundred fifty milimetre into six hundred milimetre), 600 mm (six hundred milimetre) below ground level as perdrawings and Technical Specification Clause 1701. The rate shall include carriage of machineries, equipment, tools, materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rates excluding of GoodsServices Tax but including Labour cess, other levies/taxes , duties /royalities, cess, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract.The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 29 | Providing and erecting Direction and Place Identification signs with size 800x600mm (Eight hundred into six hundred milimetre) retro-reflectorised sign as per IRC:67 (IRC - sixty seven) made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm (two millimetre) thicksize 900 x 600mm (nine hundred into six hundred milimetre) with areanot exceeding 0.9 sqm (zero point nine square metre) supported on mild steel angle iron post 75x75x6mm (seventy five into seventy five into six millimetre) 2 (two) Nos firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450 x 450 x 600 mm (four hundred fifty into four hundred fifty into six hundred millimetres), 600 mm (six hundred millimetre) below ground level as per approved drawing and M.O.R.D. Tehnical Specification Clause 1701 including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge.The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 30 | Providing and erecting Direction and Place Identification signs with size 1200x900mm (tweleve hundred into nine hundred milimetre) retro-reflectorised sign as per IRC:67 (IRC - sixty seven) made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm (two millimetre) thicksize 900 x 600mm (nine hundred into six hundred milimetre) with areanot exceeding 0.9 sqm (zero point nine square metre) supported on mild steel angle iron post 75x75x6mm (seventy five into seventy five into six millimetre) 2 (two) Nos firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450 x 450 x 600 mm (four hundred fifty into four hundred fifty into six hundred millimetres), 600 mm (six hundred millimetre) below ground level as per approved drawing and M.O.R.D. Tehnical Specification Clause 1701 including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 31 | Providing and fixing of typical PMGSY Logo sign board with Logo as per MORD specifications and drawing with ACP Sheet 3mm (three milimetre) thick fixed onMS angle 25mmx25mm x 3mm (twenty five milimetre into twenty five milimetre into three milimetre)size on back on edges.Vertical Post MS square tubes 80x80x4.80mm (eighty into eighty into four point eight zero milimetre) thick duly embedded with base plate 200x200x5mm (two hundred into two hundred into five milimetre)in cement concrete M-20 (M- twenty) (As per Drg.) grade blocks of Size 450mm x 450mm x 600mm (four hundred fifty milimetre into four hundred fifty milimetre into six hundred milimetre), 600 mm (six hundred milimetre) below ground level.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1. Retro Reflective Sheet Type IV including cutting, printing, lettering & fixing comp. in all respects.{ Providing and Fixing \"Logo Board\" of PMGSY Project double sided, at Starting point and Intermediate Distance}.The rate shall including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge.The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 32 | Providing and fixing of PMGSY Citizen Informatory board as per MORD specifications and drawing with ACP Sheet 4mm thick fixed on MS angle 25mmx25mm x 3mm (twenty five milimetre into twenty five milimetre into three milimetre) size on back on edges.Vertical Post MS square tubes 80x80x4.80mm (eighty into eighty into four point eight zero milimetre) thick duly embedded with base plate 300x300x5mm (three hundred into three hundred into five milimetre) in cement concrete M-20 (M-Twenty) grade blocks of Size Size 600mm x 600mm x 750mm (Six hundred milimetre into Six hundred milimetre into Seven hundred fifty milimetre), 600 mm (six hundred milimetre) below ground level.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1. Retro Reflective Sheet Type IV including cutting, printing, lettering & fixing comp. in all respects. Providing and Fixing Citizen Informatory Board of PMGSY Project (Fig.3 & Fig.4). The rate shall including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 33 | Providing and laying of hot applied thermoplastic compound 2.5 mm (two point fivemillimetre) thick including reflectorising glass beads @ 250 gms (at the rate twohundred fiftygrams) per square metre area, thickness of 2.5mm (two point five millimetre) is exclusive of surface applied glass beads as per IRC 35 and MORD specification section 1700 and MORTH 2015 clause 803..The finished surface to be level, uniform and free from streaks and holesincluding entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 34 | Providing and laying 15 Nos. (Fifteen) rumble strips covered with premix bituminous concrete, 15-20mm (fifteen to twenty milimetre)high at center, 250mm (two hundred fifty milimetre) wide placed at 1m (one metre) centre to centre at approved locations to control speed), marked with white strips of road making paint. Taking ouput 100 sqm (one hundred square metre) (including gaps). The rate shall including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 35 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm (eighty to one hundred centimetre) high above ground level, painted black and white in 15 cm (fifteen centimetre) wide strips, fitted with 80 x 100 mm (eighty to one hundred milimetre) rectangular or 75 mm (seventy five milimetre) dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 (IRC - seventy nine) and the drawingsas per MORD Technical specification Clause 1707.The rate shall including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 36 | Providing and fixing of PMGSY Maintenance Information board as per MORD specifications and drawing with ACP Sheet 3mm (three milimetre) thick fixed on MS angle 25mmx25mm x 3mm (twenty five milimetre into twenty five milimetre into three milimetre) size on back on edges.Vertical Post MS square tubes 80x80x4.80mm (eighty into eighty into four point zero milimetre) thick with base plate 300x300x5mm (three hundred into three hundred into five milimetre) duly embedded in cement concrete M-20 grade blocks of Size 600mm x 600mm x 750mm (six hundred into six hundred into seven hundred fifty milimetre), 600 mm (six hundred milimetre) below ground level.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1. Retro Reflective Sheet Type IV including cutting, printing, lettering & fixing comp. in all respects. (Providing & fixing of Maintenance Information Board)The rate shall including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 37 | Providing and fixing pavement marker (cat eyes) made out of ABC 3 m (Three) plastic of size 128x110x29.5 mm (One hundred twenty eight into one hundred ten into twenty nine decimel five millimeter) with nail having 50 mm (Fifty millimeter) strn of ABS. The pavement marker shall be installed with epoxy ABS as per drawing and technical specification clause 805 of MORTH specification 2013 as per the direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidential. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 38 | Providing and laying mechanically mixed and vibrated concrete PCC- M 15 (M-fifteen) design mix with minimum cement content @300 kg per cum (at the rate three hundredkilogram per cubic metre) for plain/reinforced concrete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. The rate shall include carriage of machineries, equipment, tools and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 39 | Providingand laying mechanically mixed and vibrated concrete for plain/reinforced concrete in foundation complete as per drawing and Technical SpecificationClause 802, 804,805,806,807, 1202 & 1203. PCC grade M -20 (M-twenty) design mix with minimum cement content @ 350 kg per cum (at the rate three hundred fifty kilogram per cubic metre). The rate shall include carriage of machineries, equipment, tools, materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 40 | Providingand laying mechanically mixed and vibrated concrete for plain/reinforced concrete in Substructure complete as per drawing and Technical SpecificationClause 802, 804,805,806,807, 1202 & 1203. RCC grade M-20 (M-twenty) design mix with minimum cement content @ 375 kg per cum (at the rate of three hundred seventy five kilogram per cubic metre). The rate shall include carriage of machineries, equipment, tools and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 41 | Providing and layingmechanically mixed and vibratedreinforced cement concrete in superstructure complete as per drawings and Technical Specification Clauses 800, 1205.4 and 1205.5 Reinforced Cement Concrete Grade M-25 (M-twenty five) design mix with minimum cement content @ 425 kg per cum (at the rate four hundred twenty five kilogram per cubic metre). The rate shall include carriage of machineries, equipment, tools and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 42 | Providing and laying mechanically mixed and vibratedcement concrete Wearing course M-30(M-thirty) grade design mixwith minimum cement content @ 430 kg per cum (at the rate four hundred thirty kilogram per cubic metre) including reinforcement complete as per drawings and Technical Specification Clauses 800, 1206.3. The rate shall include carriage of machineries, equipment, tools and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 43 | Supplying, fitting and placing HYSD bar reinforcement (Fe -550) (Fe- five hundred fifty) made of TATA TISCON/SAIL in substructure complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202. The rate shall include carriage of machineries, equipment, tolls and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects as per direction ofEngineer-in-charge including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 44 | Supplying, fitting and placing HYSD bar reinforcement (Fe -550) (Fe- five hundred fifty) made of TATA TISCON/SAIL in superstructure complete as per drawings and technical specification Clauses 1002, 1010 & 1202. The rate shall include carriage of machineries, equipment, tolls and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects as per direction ofEngineer-in-charge including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge.The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 45 | Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawingandM.O.R.D. technical specifications section 1204.3.8 and as per direction of Engineer – in- Charge including carriage of materials within all leads, liftsand other incidental . The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 46 | Providing and laying 900mm (nine hundred milimetre) dia reinforced cement concrete pipe NP-3 (NP-three) for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement:two sand) but excluding excavation, protection work, back filling, concrete and masonary work in head walls and parapets Clause 1106.The rate shall including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge.The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| 47 | Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701. The rate shall including entire carriage of materials within all leadslifts and other incidentals and per direction of Engineer-in-Charge. The rate includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government but exclusive GST which shall be paid separately. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
