|
| 1 | S/E/I/T/C of 6 mtr LED decorative Trianga Pole made round pile duly polyurithene paint coated fitted with polycarbonate diiffuser and 75 watt LED module as per Attached line drawing and accessories made of cast aluminium housing With power LED’s are mounted directly on PCB with extruded aluminium heat shrink, including base plate and nuts and bolts(anchor bolt) of sizes ,complete job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in charge of the work. Reputed make. Height -6mtr pile Dia.165.1(3) PC(h)-3 mx150 Base plate 300x10 MFMD-122A watt-75w |
| 2 | SITC of FEEDER PILLAR 1 phase 2 wire, 415V, 1nos of 100 Amps incoming SP MCCBs fitted with outgoing 04 No 32 Amps SP MCBs for Service Connections, Distribution Service Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars 2P, Aluminium with heat shrinkable sleeves and adequate capacities complete with all accessories 4 way Distribution Service Pillar. Support Galvanised angle frame and legs (40mm x 40 mm x 3mm) for Distribution Feeder Pillar with leg height 1m with 0.3m in soil approx [email protected] per mtr, Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.Cement grouting for support angle legs, Spares @ 3%, Erection Charges @10%, Overheads @ 5% (1.0% T&P 0.5% Storage and Handling , 3% Contingency and safety equipments, 0.5% Insurance) and Turnkey factor @25% |
| 3 | Supply of 1.1 kV 4C x 16 sq mm Aluminium Unarmoured PVC Cable |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excludingsand cushioning and protective covering. upto 35 Sq. mm |
| 5 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade asrequired. 3½ X 25 sq. mm (28mm) |
| 6 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 7 | SITC of Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip. |
| 8 | Earthwork in Excavation by manual means in trenches , foundations not exceeding 1.5m in width. Shafts, wells and the like not exceeding to 10sqm on plan including dressing of sides and ramming of bottoms. |
| 9 | Removal of Mulba from site |
| 10 | P/L in position Cement conc. 1 cement: 4 fine sand: 8 graded crushed stone agg 40 mm excluding the cost of centring & shuttering all work upto plinth level. |
| 11 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring, shuttering, finishing and reinforcement.1:1½:3 |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for: foundation |
| 13 | Supply and Installation of MS Plates ( Complete Job) |
| 14 | P/F Mild Steel Round holding down bolts with nuts and washer plates complete |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.TMT bars of grade Fe 500D or more |
| 16 | Carriage of constructed material Sand 0.45/cum |
| 17 | Carriage of constructed material Aggregate 0.85/cum Please Enable Macros to View BoQ information |
