|
| 1 | M&L for repairs to pot holes of any depth not exc. 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc. cutting around edges to atleast 25mm in depth, making good by applying tack coat with bituminous primer (grade VG-10) @ 5 kg per 10Sqm putting in and providing premixed bituminous macadam, well rammedand sealed with binder 9.8 Kg per 10 sqm iblinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm all as specified and directed.(NOTE : Quantity of bitumen shall be provided as per design mix approved by GE.) |
| 2 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm, exc 50mm deep and removing scarified material to a distance not exc. 50 mtr complete all as specified and directed. |
| 3 | M&L for 150 mm thick (in two layers of 75mm compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013complete all as specified and directed. |
| 4 | M&L for Preparing unsurfaced WBM / WMM new or oldsurfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat with bitumen primer of bituminous grade VG-10 @ 7.5 kg per X SQM complete all as specified and as directed. |
| 5 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm, not exc 50mm deep and removing scarified material to a distance not exc. 50 mtr complete all as specified and directed. |
| 6 | M&L for providing Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen VG-30 binder content 4% by weight of total mix complete all as specified and directed. |
| 7 | Preparing of old black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat of paving bitumen (VG-10) @ 2.5 Kg per ten square metre complete all as specified and directed. |
| 8 | Providing Bituminous premix asphaltic semi dense concrete 30 mmconsolidated thickness with minimum5% binder contentby weight of total mix, using paving bitumen (VG -30),rolled and compacted to required camber and gradient complete all as specified and directed.Note :- (i) Mixing of SDAC shall be carried out in Hot Mix plant and laying, spreading of BM shall be carried out uniformly by using automatic type sensor paver.(ii)The design mix for BM considering bitumen content as specified shall be carried out from any one of the Institution as specified in particulars specifications & cost thereof shall be deemed to be included in quoted rate.(iii)Work shall be executed as per design mix as approved by GE. (iv) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the Government.(v) Contractor shall submit the authenticated weight batch receipt as per load material in site duly marked vehicle No. |
| 9 | Supply and fix in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufacturer\"s instructions including taking out old unserviceable road stud of any description complete all as specified and as directed.(NOTE : Old unserviceable cat eyes of any description shall be contractor\"s property as per schedule of credit.) |
| 10 | Taking down old unserviceable sign board and S&F retro reflective sign board of size 4\" x 3\" fixed both sides on stainless steel board made out of aluminium composite panel (ACP) sheet, 3mm thick fixed on SS-304 series hollow tubular section, 38mm dia. The board shall be provided with reflective tape of quality high intensity chequered type blue colour, letter/symbol shall be written in white colour writing of approved shape. The sign board shall be supported on 2 NOspost of 60mm dia stainless steel pipe, 304 series 3mtr long with round moulded design on top duly embedded in ground of size 450x450x750mm in PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) including necessary excavation/earthwork etc as directed by Engineer-in-Charge.Note : The sample of sign board is to be approved by GE as per ground requirement before procurement by Contractor. |
| 11 | S&F in repairs un-breakable traffic convex mirror of 40 inch dia fixed over and including 50mm bore S304 pipe of length 1500mm incl embedding in PCC 1:4:8 of size (0.45 x 0.45 x 0.50 m) type B-1 including necessary excavation, removal of soil incl removing of old unserviceable trafffic mirror of any type and size and removing from site complete all as specified and as directed.NOTE : The sample and make of Convex mirror are to be approved by GE as per the ground requirement, before procurement by Contractor. |
| 12 | M & L for preparation of New / Old Road surfaces and applying thermoplastic reflective paint for marking of 2.5 mm thick as in centre line and edge line, zebra crossing, stop lines, dashes, arrows etc, road marking of 150mm/ 100 mm width using \"Hot Application\" white or golden yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads, pigments, such as Titanium dioxide, calcium carbonate inter filler, thermoplastic requirment for glass beads shall beconfirming to MORTH specification (BS 3262-1989) including spraying of glass beads etc all as per manufacturer\"s instructions complete all as specified and as directed by Engr-in-Charge. |
| 13 | S & F in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturer\"s instructions etc. including taking out old unserviceable cat eyes of any description complete all as specified and as directed. |
| 14 | M&L for Moorum/red bajari filling in floors or pavement brought from outside the MD land, laid in layers not exc 15 cm thick spread, levelled and rammed incl watering complete all as specified and directed. |
| 15 | Dismantling stone slab/tiles of any description or thickness, laid, bedded & pointed in cement mortor in floors, hard standing, Apron etc complete all as specified and directed. |
| 16 | Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and directed. |
| 17 | M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete all as specified and directed. |
| 18 | M&L for ISI marked 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of crushed stone sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and directed. |
| 19 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, coping etc. complete all as specified and directed. |
