|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each, complete in all respect as specified and directed. |
| 2 | Taking down shutter and refixing in same opening after easying exc 1 sqm and n. exc 2 sqm each, complete in all respect as specified and directed. |
| 3 | Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each, complete in all respect as specified and directed. |
| 4 | M&L for brick work with sub-class \"B\" old size bricks of class designation (CD) 75, straight or curved on plan exc 6m mean radius, built in cement mortar (CM) 1:6, including dismantalling of brick work built in cement mortar in any position, complete in all respect as specified and directed. |
| 5 | M&L for half brick work with subclass ‘B’ old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:4) including dismantalling of brick work built in cement mortar in any position, complete in all respect as specified and directed. |
| 6 | S&F in repair for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; and similar work conforming to Fe. 290, Gde-E-165complete in all respect as specifified and directed. |
| 7 | Providing and laying skid/non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6, complete in all respect as specified and directed. |
| 8 | Providing and laying coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.18 sqm, in skrting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick rendering in cement mortar (CM) 1:4, complete in all respect as specified and directed. |
| 9 | M&L for any colour of granite stone without white spots Granite stone slab 17 to 19 mm thick, as in floor, dado, steps, laid over and including screed bed 15 mm thick in cement mortar (CM) 1:6, jointed and pointed with white cement mixed with pigment to match the shade of stone including cuttingl rubbing and polishing surface, including cutting for wash hand basin, sink, gas pipe hole etc., to the entire satisfaction of the Engineer-in-Charge, complete in all respect as specified and directed. |
| 10 | M&L 15 mm thick plastering on brick/ stone/ concrete surfaces of wall in cement mortar (1:4), finished even & smooth without using extra cement, including taking down existing surface complete all as specified and directed. |
| 11 | M&L 15 mm thick plastering on brick/ stone/ concrete surfaces of of wall in cement mortar (1:6), finished even and smooth without using extra cement, including taking down existing surface complete all as specified and directed. |
| 12 | M&L 10 mm thick plastering on brick/ stone/ concrete surfaces of ceiling in cement mortar (1:3) finished even and smooth without using extra cement, including taking down existing surface complete all as specified and directed. |
| 13 | Supply only water proofing compound complete, in all respect as specified and directed. |
| 14 | S&F for 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 15 | S&F for 20 mm bore of tubes, \"medium grade\" galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down including necessary cutting, chauging etc. complete in all respect as specified and directed. |
| 16 | S&F in repair 20 mm bore of Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed, complete in all respect as specified and directed. |
| 17 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. or for window grill of appd size and shapeincluding fixing with aluminium \"U\" shape section for fixing etc. complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 18 | S&F powder coated aluminium three tier window frame including necessary joining cleats, of Jindal section No 20832 or equivalent section of appd make of 1.5mm thick complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 19 | S&F in repair for 75 mm size of butt hinges stainless steel, complete in all respect as specified and directed. |
| 20 | S&F in repair for 100 mm size of stainless steel butt hinges ISI marked, complete in all respect as specified and directed. |
| 21 | S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing, complete in all respect as specified and directed. |
| 22 | S&FFactory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 23 | S&F powder coated aluminium ventilator with half portion louvered (adjustable)with 4mm thick glass in louver and balanced portion fixed 4mm thick frosted glass glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete in all respect as specified and directed. |
| 24 | S&F in repair for 4 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete in all respect as specified and directed. |
| 25 | S&F in repair for stainless steel wire cloth,0.36 mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples fixing withbeads, complete in all respect as specified and directed. |
| 26 | S&F 30 mm thick Flush shutters, solid core construction, with block board core with decorative face veneers with lipping on both sides, complete in all respect as specified and directed. |
| 27 | S&F aluminium anodised, barrel tower bolt of extruded section 200 mm long, complete in all respect as specified and directed. |
| 28 | S&F in repair for Aluminium handle cast type anodised 125 mm, complete in all respect as specified and directed. |
| 29 | S&F in repair for aluminium anodised sliding door bolts with hasp and staple (boilt type) 16 mm dia bolt, 250 mm long, with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate, complete in all respect as specified and directed |
| 30 | S&F in repair for mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate, complete all as specified and directed. |
| 31 | S&F in repair for 5.50 mm thick ofbevelled edge mirror of selected quality decorative type designer mirror with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 32 | S&F in repair 15mm bore concealed long neck , CP finished stop valves, cast copper alloy, screwed down, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete in all respect as specified and directed. |
| 33 | S&F in repair for vitreous china wash down water closet Pan (pedestal pattern) white including plastic water closet seat cover, white, closed pattern with flat bottom, and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete all as specified and directed. |
| 34 | S&F in repair for Vitreous China urinals, full stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern complete all as specified and directed. |
| 35 | S&F in repair 15mm bore , CP finished Auto closing Concealed Urinal Flush Valve, cast copper alloy, screwed down, highpressure, with screwed both ends foriron pipe orfor unions and fixed complete in all respect as specified and directed. |
| 36 | S&F in repair Pillar Cock Auto Closing System, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete in all respect as specified and directed. |
| 37 | S&F in repair for 8 mm thick curved shaped urinal partition with frosted glass size 900 x 450 mm including stainless steel fixing brackets complete in all respect as specified and directed. |
| 38 | S&F in repair PVC valveless, syphonic action type, low level dual flush cistern 10 ltr capacity, white, wtih inlet, ball valve, float and handle including bracketS&Flush pipe of polyethylene for low or high level cistern of required height of high density PVC, 32 mm dia pipe, complete in all respect as specified and directed. |
| 39 | S&F in repair for PVC connection 15 mm size with PTMT nuts of length 450 mm, complete in all respect as specified and directed. |
| 40 | S&F in repairs 15 mm bore fancy type CP finished angle valves, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete in all respect as specified and directed. |
| 41 | S&F in repair Health faucet cast coper alloy CP finish 15 mm dia fancy type with brass plated flexible hose and wall hook, 1.00 mtr complete, in all respect as specified and directed. |
| 42 | S&F in repair for CP finish cast copper alloy, two way bib cock complete in all respect as specified and directed. |
| 43 | S&F in repair for Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges cast copper alloy, chromium plated finish, complete in all respect as specified and directed. |
| 44 | S&F in repair Counter Top Basin, Size: 420 x 420 x 155 mm including Waste coupling 32 mm SS and Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange ,complete in all respect as specified and directed. |
| 45 | S&F in repair for 75 mm dia of outlet, PVC (SWR) nahani trap, plain with SS grating of size 150mmX150mm, 0.75mm thick openable at center including jointing with solvent cement, complete in all respect as specified and directed. |
| 46 | S&F in repair for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including necessary MS pipe clamp, complete in all respect as specified and directed. |
| 47 | S&F in repair for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including necessary MS pipe clamp, complete in all respect as specified and directed. |
| 48 | S&F in repair for PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 110 mm bore, complete in all respect as specified and directed. |
| 49 | S&F in repair for PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 75 mm bore, complete in all respect as specified and directed. |
| 50 | S&F in repair for PVC (SWR) single (single \"T\") equal or unequal 110mm bore pipe with access door, complete in all respect as specified and directed. |
| 51 | S&F in repair for PVC (SWR)single (single \"T\") equal or unequal 75mm bore pipe with access door, complete in all respect as specified and directed. |
| 52 | S&F in repair for PVC (SWR) bends any radius 110 mm bore, complete in all respect as specified and directed. |
| 53 | S&F in repair for PVC (SWR) bends any radius 75 mm bore, complete in all respect as specified and directed. |
| 54 | S&F in repair for PVC (SWR) vent cowl 110 mm dia bore, complete in all respect as specified and directed. |
| 55 | S&F in repair for PVC (SWR) vent cowl 75 mm dia bore, complete in all respect as specified and directed. |
| 56 | Supply and fixed unplasticised PVC (SWR) Gully trap125/110 mm, setting and jointing with solvent cement complete in all respect as specified and directed. |
| 57 | M&L for precast RCC, type B-1, 1:2:4 (using 20 mm crushed and graded stone aggregate) as in manhole covers/ cover slabs or of similar type slab works, etc. incl necessary formwork and loading/ unloading of the same and fixed in position, complete in all respcet as specified and directed. |
| 58 | Providing and laying reinforced concrete slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like using 1:2:4type B-1, (using 20 mm crushed and graded stone aggregate) complete in all respcet as specified and directed. |
| 59 | M&L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all not exceeding 20cm wide complete in all respcet as specified and directed. |
| 60 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete in all respcet as specified and directed. |
| 61 | S&F 10 mm dia and over TMT bar cut to length bent to shape required including cracking bending spiarlly for hoping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.90 mm dia or securing with clip, complete in all respect as specified and directed. |
| 62 | M&L for plinth protection or in foot path of 75 mm thick of cement concrete using type C-1, 1:3:6 (using 20 mm nominal size crushed and graded stone aggregate) in alternate penals and finished fair and even complete in all respect as specified and directed. |
| 63 | M&L for preparation of old decorated plastered surface of wall after complete removal of existing treatment and applying two coats of weather coat over 2 mm thick wall care putty (in two layers) over a coat of primer including preparation of surface, complete in all respect as specified and directed. |
| 64 | M&L for complete removal of existing treatment on wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2 mm thick (in two layers) wall care putty, complete in all respect as specified and directed. |
| 65 | M&L for preparation of old decorated plastered surface of ceiling and applying two coats of oil bound distemper including filling of voids with wall care putty on plastered surface including complete removal of existig treatment, complete in all respect as specified and directed. |
| 66 | M&L for preparation of newly plastered surface of wall and applying two coats of weather coat over 2 mm thick wall care putty over a coat of primer including necessary preparation of surface, complete in all respect as specified and directed. |
| 67 | M&L for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2 mm thick (in two layers), wall care putty, complete in all respect as specified and directed. |
| 68 | M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper including filling of voids with wall care putty on plastered surface, complete in all respect as specified and directed. |
| 69 | M&L for preparing of new undecorated wooden surface, of any description, not otherwise described, overe 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of pink primer, complete in all respect as specified and directed. |
| 70 | M&L for point wiring in replacement with 1.5 sqmmFRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade (MMS ISI) of size not less than 20 mm dia(or as site requirement) concealed in wall/over ceiling, pressed steel concealed terminal boxes suitable for modular fixtures complete with all accessories and all as specified including 1.5 sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dollyfor light / fan/ bell point controlled by one switch complete in all respect as specified and directed.Note:- (i) Cost of PVC conduit, steel terminal boxes,modular fixtures for mounting modular switches, cover plates etc, are deemed to be included in the quoted rate.(ii) M&L for cutting chases on walls / ceilingand making good disturbed surfaces including finishing with cement mortar (1:3) etc, are deemed to be included in the quoted rate. |
| 71 | All as per item 70 above but for One 3 pin socket outlet 5 Amps on same board complete in all respect as specified and directed. |
| 72 | All as per item 70 above but for One 3 pin switch socket combination 5 Amps on indpendent board complete in all respect as specified and directed. |
| 73 | All as per item No. 70 above but with 4 sqmm single core multistranded copper conductor FRLSH cable for 3/5 pin 15 Amp socket outlet on independent board complete in all respect as specified and directed. |
| 74 | S&F in replacement Modular switch in replacement 1 way 10 A 1 module module complete all as directed. |
| 75 | S&F in replacement Modular switchin replacement 1 way 16 Amp SP ,1 module complete all as directed. |
| 76 | S&F in replacement Modular Socketin replacement 6 A 2/3 pin combined 2 module complete in all respect as specified and directed. |
| 77 | S&Fin replacement Modular Socketin replacement 16 A-2/3 pincombined 2 module complete in all respect as specified and directed. |
| 78 | S&F in replacement of ceiling rose polycarbonate typethree terminals complete all as specified and directed. |
| 79 | Supply and fix in repair energy efficient exhaust fan in lieu of Old exhaust fan , steel body AC single Phase ,BEE 5 Star rating. 230V of size 300mm sweep with, blades, and frame and louvers in replacement of old exhaust fan of any type ,old fan will be deposited to AGE E/M yard all complete as specified and directed. |
| 80 | S&F in replacement LED Tube light luminaires, 20-22 watts, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housing, with high transmissivity diffuser, high lumen output, with suitable integrated electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable offrom connector and ceiling rose, complete all as specified and directed. |
| 81 | S&F in replacement LED Tube light luminaires, 10 watts, lumen output not lessthan 2000 (2 feet), made of anodised extruded aluminium housng, with high transmissivity diffuser, high lumen output, with suitable integrated electronic driver, and operated complete in all respect as specified and directed. |
| 82 | S&Fin replacement sheet metal enclosure double doorfor MCB DBs SPN 4 way 240 V, complete flush mounted all as specified and as directed. |
| 83 | S&Fin replacementMCB single pole (SP) 6 to 32 Amps,240 volts , C curve , AC , 50 Hz ,10 kA complete all as specified and directed. |
| 84 | S&Fin replacement MCB Single pole & neutral (SPN)63 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed. |
| 85 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I , including taking out old U/s complete alll as specified and directed . |
