Tender For Special Repair To Road/ Path At Ascone Node, Div Camp Mt Gate To Ration Store, Below Cwe Office Complex, Dou Gate To Rear Main Gate And Mes Officers Mess Porch Circle Under Ge Khumbathang, Kumbathang-Jammu And Kashmir
TDR : 54282767
Tender Notice
BOQ
17 Days Left
Kumbathang
Jammu And Kashmir
Tender For Special Repair To Road/ Path At Ascone Node, Div Camp Mt Gate To Ration Store, Below Cwe Office Complex, Dou Gate To Rear Main Gate And Mes Officers Mess Porch Circle Under Ge Khumbathang
Name of Work:SPECIAL REPAIR TO ROAD / PATH AT ASCONE NODE, DIV CAMP MT GATE TO RATION STORE, BELOW CWE OFFICE COMPLEX, DOU GATE TO REAR MAIN GATE AND MES OFFICERS MESS PORCH CIRCLE UNDER GE KHUMBATHANG.
Sl. No.
Item Description
1
Demolition of cement concrete of any description and in any position not otherwise including specifically provided to unreinforced complete all as specified and as directed by Engineer-in-Charge.
2
Material and labour for 100 mm thick cement concrete type D-2, 1:4:8 complete all as specified and as directed by Engineer-in-Charge.
3
Material and labour for 25 mm thick sand layer for bottom of interlocking tiles and filled joints at top complete all as specified and as directed by Engineer-in-Charge.
4
Material and labour for machine pressed rubber moulded precast concrete inter locking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness with M40 grade of concrete, with grey cement and pigment complete all as specified and as directed by Engineer-in-Charge.
5
Material and labour for providing cement concrete cast-in-situ type B0, 1:2:4 with 20mm graded stone aggregate in kerbs stone, off mud stops, rounded or chamfered on edges complete all as specified and as directed by Engineer-in-Charge.
6
Material and labour for premix bituminous, macadam laid / rolled and compacted to required gradient and camber ( consolidated thickness 75mm or less ) complete all as specified and as directed by Engineer-in-Charge.
7
Material and labour for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat using hot paving bitumen at the rate of 5Kg/10Sqm and bituminous premix asphaltic semi dense concrete (design mix) 30mm thick (consolidated thickness) with 5.5% binder content by weight of total mix using paving bitumen of any penetration laid / spread uniformly by means of mechanical paver over existing premixed black top surface and rolled with 8 to 12 tonne power roller to required gradient and camber complete all as specified and as directed by Engineer-in-Charge.
8
Material and labour for cleaning and preparation of the road surface for road marking paint with reflective thermoplastic white / yellow road marking paint confirming to BIS 3262, laid down through road marking machine use of 1.5mm thick incorporating the white glass beads for reflectivity complete all as specified and as directed by Engineer-in-Charge.
9
Supply and fix solar delineator light with a dimension of 70mm x 70mm x 100mm, direction 360 degree, round light procted with MS mesh, fitted on 45/50 mm dia mild steel pipe of 1100mm height, powder coated including post hole embedding in PCC 1:2:4 (300mm x 300mm x 450mm) type B1 complete all as specified and as directed by Engineer-in-Charge.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
