|
| 1 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 2 | Providing and laying Ceramic glazed tiles on walls of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.DSR 2023-24 S.No. 11.37 A |
| 3 | Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 4 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneer on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 2023 S.No. 9.20 |
| 5 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) (DSR 2023 S.No. 10.28). |
| 6 | Supply and fixing of Tower Bolt 100 mm ............ Including all complete. |
| 7 | S/F of Door handle 150 mm …………… ……………. Including all complete. |
| 8 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacoratedwall surface togive evenshade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75 Ltr/ 10 sqm coat curing and cos to fall material, labour, T&P etc. required for proper completion of work.for two coat. (PWD SOR 2025-26 SNo. 35 New |
| 9 | Applying priming coat over new steel and Painting Ist coat over priming coat on steel and other material………………all complete. |
| 10 | Providing and laying Vitrified tiles in floor with lean concrete of 600x600mm sizes (thickness 10mm), with a water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. including preparation of 75mm thick base with concrete 1:4:8 Cement, Coarse sand and 40 mm B/B complete as per Engineer -In -Charge. (DSR 2023 S.No. 11.41.2) |
| 11 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR 2023 S.No. 17.1.1) |
| 12 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. (DSR 2023 S.No. 17.7.1). |
| 13 | Carpenter (Skilled) For flush door shutters Gate Repairs Work …………..all complete. (PWD SOR 2025-26 Chapter No-02 Item No. 3 a) |
| 14 | P/F Of urinal Pots …………..all complete. (DSR 2023 S.No. 17.23). |
| 15 | P/F Of Urinal Pots Pipes…………..all complete. |
| 16 | Proving and laying cement concrete in 1:2:4 with cement, coarse sand and 20mm guage stone aggregate, curing complete, including cost of form work. (PWD SOR 2025-26 Chapter No-05 Item No. 7 spec. No. 4.1) |
| 17 | Supply of Welder for fixing of mild steel gate and channel…………..all complete. (PWD SOR 2025-26 Chapter No-02 Item No. 7) Please Enable Macros to View BoQ information |
