|
| 1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR 2023 S.No. 13.88 |
| 2 | Fininshing walls with putty of approved brand etc including all complete. PWD Sl No.- New |
| 3 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacoratedwall surface togive evenshade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75 Ltr/ 10 sqm coat curing and cos to fall material, labour, T&P etc. required for proper completion of work.for two coat. (PWD SOR 2025-26 SNo. 35 New |
| 4 | Dismantling single tiled roof, any kind including purlin and batterns and including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters(20 feet). |
| 5 | Demolishing lime concrete manually/ by mechanical means and disposal of material with in 50 metres lead as per direction of Engineer- in-charge. (DSR No. 15.1) |
| 6 | Cartage of earth or malva from 8 km lead…………..all complete. |
| 7 | P/L cement concrete in 1:2:4 ratio ………… ……… …. Including all complete. |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneer on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 2023 S.No. 9.20 |
| 9 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.. (1.5 mm thick) DSR 2023 S.No. 9.127 |
| 10 | Providing and laying Ceramic glazed tiles on walls of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.DSR 2023-24 S.No. 11.37 A |
| 11 | Providing and laying Vitrified tiles in floor with lean concrete of 600x600mm sizes (thickness 10mm), with a water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. including preparation of 75mm thick base with concrete 1:4:8 Cement, Coarse sand and 40 mm B/B complete as per Engineer -In -Charge. |
| 12 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. DSR 2023 S.No. 17.1.1 |
| 13 | Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 14 | Supply and fixing of Tower Bolt 100 mm ............ Including all complete. (105-105x10.08%= 94.00) |
| 15 | S/F of Door handle 150 mm …………… ……………. Including all complete. (125-125x10.08%= 112.00 ) |
| 16 | Supply and fixing towel ring …………………………all complete. |
| 17 | Applying priming coat over new steel and Painting Ist coat over priming coat on steel and other material………………all complete. |
| 18 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 19 | Supply of Welder for fixing of mild steel gate and channel…………..all complete. |
| 20 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :.DSR 2023-24 S.No. 11.19.1 |
| 21 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. DSR 2023 S.No.17.19.1 |
| 22 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 23 | Providing and laying aluminium framed door including all complete as per market rate……………..all complete. |
| 24 | 12 mm thick cement plaster with 1:4 cement & coarse sand mortar including plastering upto floor two level. Sl No.- 13.4 |
| 25 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively |
| 26 | Providing and fixing waste pipe for urinal basin mm sizes respectively……….all complete. Please Enable Macros to View BoQ information |
