|
| 1 | Dismantling old plaster |
| 2 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge DSR15.5 |
| 3 | Dismantling brick work |
| 4 | Dismantling cc...as per SOR CH-15 item no.694 |
| 5 | Dismantling door,window,and ventilator i/c all… Rate as per DSR |
| 6 | E/W in excavation by mchanical means(Hydraulic excavator)/manual means over area (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer -in-charge.All kind of soil .DSR2.6.1 |
| 7 | Providing and laying of position cement conc. Of specified grade excluding thre cost of centering and shuttering with 1:5:10(1 cement :5 c.sand :10 graded stone aggregate 40mm nominal size derived from natural source)… Rate as per DSR4.1.10 |
| 8 | Construction of granular sub-base by providing coarse graded Material, grading one spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 |
| 9 | Brick work with common burnt clay F.P.S ( non modular) brick of class designation 7.5 in superstructure above plinth levelup to floor V level in all shapes and sizes in : cement mortor 1:4 (1 cement :4 c. sand) DSR6.4.1 |
| 10 | Avg 12mm thk plaster with 1:4 cement and c.sand mortor i/c all etc... DSR13.4.1 |
| 11 | Shuttering and centering |
| 12 | Providing and laying of R.C.C with 1:1.5:3, (1 cement:1.5 c.sand(zone III) Derived from natural source :3 graded stone aggregate 20 mm nominal size derived from natural source |
| 13 | Steel reinforcement for R.C.C work including straightening,cutting , bending ,placing in position and biding all complete upto plinth level. |
| 14 | Providing and applying white cement based putty of average thickness 1mm of approved brand an manufacture,over the plastered wall surface to prepare the surface even and smmoth complete. DSR5.10.1 |
| 15 | Finishing wall with primium acrylic smooth paint i/c all…DSR13.47.01 |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth Tevel:1:1.5:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 4.1.2 |
| 17 | Kota stone slab flooring over 20mm (avg) thick base laid over and jointed wiyh grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortor 1:4 (1 cement :4 c.sand) 25 mm thick DSR11.26 |
| 18 | MS angle for door windows and ventilator by weight…Rate as per DSR |
| 19 | Painting on synthetic enamel paint of approved brand abd manufacture of required colour to give an even shade DSR13.53 |
| 20 | Providing and laying 80mm thk rubber mould interlocking tiles at site I/C all...as per SOR CH-17 item no.16 Please Enable Macros to View BoQ information |
