|
| 1 | PART-A |
| 2 | All Below Items Provided by contractor (Basic Rate with Freight & Insurances Charges to be Quoted by Bidder) |
| 3 | PCC Pole 8.5 Mtr Long |
| 4 | PCC Pole 9 Mtr Long |
| 5 | ST Pole 11 Mtr Long SP-55 (Bottom Portion Hot Dip Galvanised) |
| 6 | ST Pole 13 Mtr Long SP-70 (Bottom Portion Hot Dip Galvanised) |
| 7 | LT ABC of size 3x50+1x35+1x16 sqmm |
| 8 | LT ABC of size 3x95+1x70+1x16 sqmm |
| 9 | LT ABC of size 3x120+1x95+1x16 sqmm |
| 10 | Cable Alluminium PVC of size 3.5x35 Sqmm |
| 11 | Cable H.T XLPE 11 kv of size 3x120 sqmm |
| 12 | ACSR Rabbit Conductor |
| 13 | ACSR Dog Conductor |
| 14 | ACSR Raccon Conductor |
| 15 | Eye Hook |
| 16 | Eye Hook Clamp with Nut & Bolt |
| 17 | J Type Hook |
| 18 | M.S Angle of size 65x65x6 MM, Bracing with 4 Clamp |
| 19 | M.S Angle of size 65x65x6 MM, 2028 mm with Clamp |
| 20 | 11 kv AB Switch TPMO with OP Handle |
| 21 | M.S T-off Channel of size 100x50x5x1300 mm |
| 22 | M.S Top Channel of size 100x50x5x2240 mm |
| 23 | M.S Top channel 33 kv of size 125x65 mm, 3200 mm with Clamp |
| 24 | Nut & Bolt with Washer off size |
| 25 | 11 kv Dropper Channel of size 100x50 mm |
| 26 | SMC LT Distribution Box 3 Phase |
| 27 | 3 Phase DO Fuse Set |
| 28 | Alluminium Paint |
| 29 | Alluminium Binding Wire 6 SWG |
| 30 | Distribution Box Clamp |
| 31 | Guarding Clamp for PCC Pole |
| 32 | 11 kv V-Type Steel Cross Arm of size 65x65x6 mm |
| 33 | 33 kv V-Type Steel Cross Arm |
| 34 | 11 kv F-Clamp |
| 35 | E-Bracket with Nut & Bolt For SP-55, 33 kv |
| 36 | F-Bracket for fiiting top insulator with Nut & Bolt |
| 37 | F-Bracket for 33 kv Line |
| 38 | 33 kv F-Clamp For 11 Mtr Long STP |
| 39 | Dead & Clamp |
| 40 | LT Piercing Connector for size 120/95/50 Sqmm |
| 41 | Number Plate |
| 42 | Earth Rod of size 2540x20 mm |
| 43 | Armor Rod with Ferrule for Dog Conductor Set |
| 44 | Earthing Complete |
| 45 | Danger Board with Clamp, Nut & Bolt |
| 46 | 11 kv Stay Clamp for PCC Pole with Nut & Bolt |
| 47 | 0.81 S.E. Alluminium Binding Wire |
| 48 | DPC Alluminium Binding Wire of Size 1.00 MM |
| 49 | G.I Barbed Wire |
| 50 | Earth Wire 7/16 SWG |
| 51 | Earth Wire Clamp For STP with Nut & Bolt |
| 52 | G.I Pin 11 kv With Nut & Bolt |
| 53 | 33 kv Pin Insulator |
| 54 | 11 kv Composite Polymer Pin Insulator |
| 55 | 11 kv Disc Insulator T&C 45 KN |
| 56 | 33 kv Polymer Disc Insulator B&S 70 KN |
| 57 | 33 kv Disc Insulator With Fitting |
| 58 | 11 kv Disc Fitting T&C 45 KN |
| 59 | Red Oxide Paint |
| 60 | Stone Pad 300x300x75 mm |
| 61 | G.I Wire 6&10 SWG For Guarding |
| 62 | 11 kv Stay Loop Insulator |
| 63 | Cross Arm Holding Clamp for PCC |
| 64 | 33 kv V-Type Steel Cross Arm Holding Clamp With Nut & Bolt |
| 65 | Clamp with Nut & Bolt |
| 66 | Clamp for Top Channel With Nut & Bolt |
| 67 | Dropper Channel Clamp with Nut & Bolt |
| 68 | G.I Wire 6 SWG |
| 69 | G.I Wire 10 SWG |
| 70 | Suspension Clamp |
| 71 | Stay Set Galvanised 16x1800 as per ann-1 |
| 72 | Stay Complete |
| 73 | 33 kv Stay Complete |
| 74 | G.I Guarding Angle 65x65x6x1600 mm |
| 75 | Guarding Cross Arm 5.8Kg/M9.28 Kg |
| 76 | PG Clamp |
| 77 | LT Clamp for PCC |
| 78 | Stay Wire 7/8/10 SWG |
| 79 | Guard Wire |
| 80 | I/D & O/D Cable Jointing Kit 3x120 XLPE |
| 81 | HDPE Pipe 6 Inch Dia |
| 82 | G.I Pipe 6 Inch Dia for XLPE |
| 83 | 6 Core single Mode Arm OFC Cable 9/125 sm |
| 84 | Back Clamp for Guarding Cross Arm with Nut & Bolt |
| 85 | PART-B |
| 86 | Safe Carriage, Erection, commissioning and installation of following items done by contractor |
| 87 | PCC Pole 8.5 Mtr Long |
| 88 | PCC Pole 9 Mtr Long |
| 89 | ST Pole 11 Mtr Long SP-55 (Bottom Portion Hot Dip Galvanised) |
| 90 | ST Pole 13 Mtr Long SP-70 (Bottom Portion Hot Dip Galvanised) |
| 91 | LT ABC of size 3x50+1x35+1x16 sqmm |
| 92 | LT ABC of size 3x95+1x70+1x16 sqmm |
| 93 | LT ABC of size 3x120+1x95+1x16 sqmm |
| 94 | Cable Alluminium PVC of size 3.5x35 Sqmm |
| 95 | Cable H.T XLPE 11 kv of size 3x120 sqmm |
| 96 | ACSR Rabbit Conductor |
| 97 | ACSR Dog Conductor |
| 98 | ACSR Raccon Conductor |
| 99 | Eye Hook |
| 100 | Eye Hook Clamp with Nut & Bolt |
| 101 | J Type Hook |
| 102 | M.S Angle of size 65x65x6 MM, Bracing with 4 Clamp |
| 103 | M.S Angle of size 65x65x6 MM, 2028 mm with Clamp |
| 104 | 11 kv AB Switch TPMO with OP Handle |
| 105 | M.S T-off Channel of size 100x50x5x1300 mm |
| 106 | M.S Top Channel of size 100x50x5x2240 mm |
| 107 | M.S Top channel 33 kv of size 125x65 mm, 3200 mm with Clamp |
| 108 | Nut & Bolt with Washer off size |
| 109 | 11 kv Dropper Channel of size 100x50 mm |
| 110 | SMC LT Distribution Box 3 Phase |
| 111 | 3 Phase DO Fuse Set |
| 112 | Alluminium Paint |
| 113 | Alluminium Binding Wire 6 SWG |
| 114 | Distribution Box Clamp |
| 115 | Guarding Clamp for PCC Pole |
| 116 | 11 kv V-Type Steel Cross Arm of size 65x65x6 mm |
| 117 | 33 kv V-Type Steel Cross Arm |
| 118 | 11 kv F-Clamp |
| 119 | E-Bracket with Nut & Bolt For SP-55, 33 kv |
| 120 | F-Bracket for fiiting top insulator with Nut & Bolt |
| 121 | F-Bracket for 33 kv Line |
| 122 | 33 kv F-Clamp For 11 Mtr Long STP |
| 123 | Dead & Clamp |
| 124 | LT Piercing Connector for size 120/95/50 Sqmm |
| 125 | Number Plate |
| 126 | Earth Rod of size 2540x20 mm |
| 127 | Armor Rod with Ferrule for Dog Conductor Set |
| 128 | Earthing Complete |
| 129 | Danger Board with Clamp, Nut & Bolt |
| 130 | 11 kv Stay Clamp for PCC Pole with Nut & Bolt |
| 131 | 0.81 S.E. Alluminium Binding Wire |
| 132 | DPC Alluminium Binding Wire of Size 1.00 MM |
| 133 | G.I Barbed Wire |
| 134 | Earth Wire 7/16 SWG |
| 135 | Earth Wire Clamp For STP with Nut & Bolt |
| 136 | G.I Pin 11 kv With Nut & Bolt |
| 137 | 33 kv Pin Insulator |
| 138 | 11 kv Composite Polymer Pin Insulator |
| 139 | 11 kv Disc Insulator T&C 45 KN |
| 140 | 33 kv Polymer Disc Insulator B&S 70 KN |
| 141 | 33 kv Disc Insulator With Fitting |
| 142 | 11 kv Disc Fitting T&C 45 KN |
| 143 | Red Oxide Paint |
| 144 | Stone Pad 300x300x75 mm |
| 145 | G.I Wire 6&10 SWG For Guarding |
| 146 | 11 kv Stay Loop Insulator |
| 147 | Cross Arm Holding Clamp for PCC |
| 148 | 33 kv V-Type Steel Cross Arm Holding Clamp With Nut & Bolt |
| 149 | Clamp with Nut & Bolt |
| 150 | Clamp for Top Channel With Nut & Bolt |
| 151 | Dropper Channel Clamp with Nut & Bolt |
| 152 | G.I Wire 6 SWG |
| 153 | G.I Wire 10 SWG |
| 154 | Suspension Clamp |
| 155 | Stay Set Galvanised 16x1800 as per ann-1 |
| 156 | Stay Complete |
| 157 | 33 kv Stay Complete |
| 158 | G.I Guarding Angle 65x65x6x1600 mm |
| 159 | Guarding Cross Arm 5.8Kg/M9.28 Kg |
| 160 | PG Clamp |
| 161 | LT Clamp for PCC |
| 162 | Stay Wire 7/8/10 SWG |
| 163 | Guard Wire |
| 164 | I/D & O/D Cable Jointing Kit 3x120 XLPE |
| 165 | G.I Pipe 6 Inch Dia for XLPE |
| 166 | 6 Core single Mode Arm OFC Cable 9/125 sm |
| 167 | Back Clamp for Guarding Cross Arm with Nut & Bolt |
| 168 | Grouting of PCC/ST Pole As per Resspo Norms |
| 169 | Grouting of Stay As per Resspo Norms |
| 170 | Cable laying Along with bricks & Sand As per Resspo Norms |
| 171 | Drilling & Establishment of HDPE Pipe |
| 172 | Dismantling of other line Items as PCC/ST Pole/Conductor/Cable etc included total scope of work in estimate as per total 05 no ERP Projects. |
| 173 | Fancing of 250 kva T/F As per Resspo Norms |
| 174 | Plinth of 250 kva T/F As per Resspo Norms |
| 175 | Chemical Earthing of 250 kva T/F As per Resspo Norms |
| 176 | Tree Branch Cutting & Chopping included total scope of work in estimate as per total 05 no ERP Projects. |
| 177 | Carriage of Dismantled other line Items from various site to store Orai as PCC/ST Pole/Conductor/Cable etc included total scope of work in estimate as per total 05 no ERP Projects. Please Enable Macros to View BoQ information |