|
| 1 | Taking down shutters exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in the same opening including necessary welding/screwing of hinges to pressed frame or PVC door framecomplete all as directed and specified. |
| 2 | Dismantling floor hearth/ wall tiling including cement mortar bedding (but not backing) and removing tiles & rubbish off thepremises complete all as directed and specified. |
| 3 | Taking down cement plaster on brick/concrete/stone masonry walls etc incl racking out joints, hacking for key, scrubbing down with water etc complete including removing rubbish off the premisescomplete all as directed and specified.. |
| 4 | M&L for rendering 15 mm thick on stone masonary surfaces or surface other than fair face of brick work or on one side of lathing for wall in CM 1:4 to be finished even & faircomplete all as directed and specified. |
| 5 | M&L for rendering 10 mm thick on stone masonary surfaces or surface other than fair face of brick work or on one side of lathing for wall in CM 1:6 to be finished even & smooth without using extra cementcomplete all as directed and specified. |
| 6 | M&Lforcoloured non skid ceramic tiles, 7 to 8mm thick (square or rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm, set and jointedin neat cement slurry and pointed in white cementwith pigment to match the shade of tiles as in floors laid over and including 15mm thick screed bed in cement mortar 1:6complete all as specified anddirected. |
| 7 | M&Lfor coloured non skid ceramic tiles, 7 to 8mm thick (square or rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm, set and jointedin neat cement slurry and pointed in white cementwith pigment to match the shade of tiles as in floors laid over andincluding 15mm thick screed bed in cement mortar 1:6 completeall as specified and directed. |
| 8 | M&Lfor coloured non skid ceramic tiles, 7 to 8mm thick (square or rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm, set and jointedin neat cement slurry and pointed in white cementwith pigment to match the shade of the tiles as in floors laid over andincluding 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 9 | M&Lfor pre polished machine cut Kota stone slab flooring 18mm to 20mm thick laidover andincluding 20mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigments to match the shade of the slabcomplete all as specified and directed |
| 10 | M&Lfor pre polishedmachine cut kota stone slab 18-20mm thick in steps, skirting, dado and pillar laid over andincluding 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 11 | M&Lfor Granite (of any type)20mm thick, over andincluding 15mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match theshade of Granite stone slab including griding, rubbing and polishing including rounding to edges of slab if required complete all as specified and directed. |
| 12 | M&Lfor Granite (of any type)20mm thick in skirting, dado, over andincluding 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match theshade of granite stone slab including griding, rubbing and polishing including rounding to edges of slab if required complete all as specified and directed. |
| 13 | M&Lfor glazed ceramic coloured tiles in vertical surface 450mmX300mmX7mm /600mm x300mm x7 to 8mmthick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar 1:4complete all as specified and directed. |
| 14 | M&L for mirror polishing on Marble / Granite / Kota stone / stone work where ever required to give high gloss finish complete all as specified and as directed. |
| 15 | S&F in repairs wash basins, vitreous China (flat back or angle back type) of size 550mmx400mm, excluding taps, waste chain and plug but including brackets etc completeincluding cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 16 | S&F in repairs vitreous China wash hand basin, white in colour, (counter type oval shaped) of size 560mmX470mmX190mm including bottle trap 150mm including cutting of exisitng Granite topcomplete all as specified and directed. Make:- Cera, Cat Part No. S2030104 & F8060101or equivalent make as specified in list of makes of Particular Specifications. |
| 17 | S&F in repairs vitreous China bowl urinal flat back, size of 465mm x 355mm x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 18 | S&F in repairs vitreous China half stall urinal white, of size 620mm x 370mm x 330mmwith grating and union for discharge pipe and fixing plug, bedding urinal against wall in CM 1:2 securing urinal/screws to plugs with and including 60mm long brass screw, pointing around urinal back in cement mortar complete all as specified and directed. |
| 19 | S&F in repairs 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet,ball valve, float and handle including necessary brackets & screws as required complete all as specified and directed. |
| 20 | S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce complete all as specified and directed. |
| 21 | S&F in repairs installation kits of PVC low level flushing cisternincluding siphon, float valve, handle, rubber washer and all necessary fittings complete all as specifed and directed. |
| 22 | S&F in repairs 15mm dia Brass chromium plated pillar taps,fancy type, with capstan heads,screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe/CPVC/UPVC pipe and fixed complete all as specified and directed. |
| 23 | S&F in repairs 15 mm dia Stop valvefancy type Brass chromium plated with long shank and cup (Concealed type) screwed both ends for iron pipe/CPVC/UPVC pipe or for unions and fixed completed all as specified and directed. |
| 24 | S&F in repairs 15 mm diaBrass chromium plated bip tap screwed down, screwed for iron/CPVC/UPVC pipes and fixed complete all as specified and directed. |
| 25 | S&F in repairstwo way Brass chromium plated 15mm dia bib cock with wall flange screwed for iron pipe/CPVC/UPVC or for brass ferrule and fixed complete all as specified and directed |
| 26 | S&F in repairs 15mm dia Brass chromium plated angular stop cock, fancy type with capstan heads,screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe/CPVC/UPVC pipe and fixed complete all as specified and directed. |
| 27 | S&F in repairs toilet paper holder with flat recessed type stainless steel fixed with chromium plated screwcomplete all as specified and directed. |
| 28 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 29 | S&F in repairsbrass chromium plated shower rose 125mm size with shower arm fixing with 15 mm pipe. complete all as specified and directed. |
| 30 | S&F in repairs brass chromium plated tubular towel rail 600mm long between flanges including all necessary fittings complete all as specified and directed. |
| 31 | S&F waste coupling 32mm bore full thread wth 80mm height for wash hand basin complete all as specified and directed. |
| 32 | S&F in repairs waste coupling CP of40mm bore for wash hand basin/Kitchen sink complete all as specified and directed. |
| 33 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 34 | S&F in repairs 15mm bore push tap any colour high pressure of PTMT screwed for iron pipe and fixed complete all as specified and directed. |
| 35 | S&F in repairs 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight 15mm-90gms/20mm 125gms) complete all as specified and directed. |
| 36 | S&F in repairs 15mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-110gms) complete all as specified and directed. |
| 37 | S&F in repairs15mm dia bore stop valve of PTMT any colour high pressure screwed for iron pipe (minimum weight 90gms) complete all as specified and directed. |
| 38 | S&F in repairsswivel shower of PTMT with arm any colour for fixing with 15 mm pipe. (minimum weight 40 gms) complete all as specified and directed. |
| 39 | S&F in repairs 450mm long and 15mm bore PVC connections fixed with PTMT nuts complete all as specified and directed. |
| 40 | S&F in repairs PTMT grating doom 125 mm dia with waste hole (Minimum weight 40gms) complete all as specified and directed. |
| 41 | S&F in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and directed. |
| 42 | S&F in repairs PTMT Grating doom 100 mm dia with waste holes complete all as specified and directed. |
| 43 | S&F in repairs high density polythelene Flexible waste pipe, 32 mm dia, suitable for wash hand basin complete all as specified and directed. |
| 44 | S&F in repairs high density polythelene Flexible waste pipe, 40 mm dia, suitable for kitchen sink complete all as specified and directed. |
| 45 | S&F in repairs 50 mm dia PVC SWR pipe suitable for urinal waste pipe etc. including bend,elbow and Tee and necessary clamping to wall or floor complete all as specified anddirected |
| 46 | S&F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in floorcomplete all as specified and directed. |
| 47 | S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in floor complete all as specified and directed. |
| 48 | S&F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall with necessary mild steel clamping complete all as specified and directed. |
| 49 | S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall with necessary mild steel clamping where required complete all as specified and directed. |
| 50 | S&F in repairs PVC (SWR)bends for 75 mm bore pipewith access door complete all as specified and directed. |
| 51 | S&F in repairs PVC (SWR)bends for 110 mm bore pipewith access door complete all as specified and directed. |
| 52 | S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 53 | S&F in repairs 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 54 | S&F 15mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc including taking up or down 15mm bore UPVC/steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. |
| 55 | S&F 20mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc including taking up or down 20 mm bore GI/PPR/PVC tubing and connectionsalong with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches complete all as specified and directed |
| 56 | S & F 25mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc including taking up or down 25 to 32mm bore GI/PPR/PVC tubing and connectionsalong with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches complete all as specified and directed |
| 57 | S&F in repairs 15mm bore gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2 for iron pipe /CPVC/UPVC pipe complete all as specified and directed. |
| 58 | S&Fin repairs 20mm bore gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2 for iron pipe/CPVC/UPVC complete all as specified and directed. |
| 59 | M&L for de-watering, removing all moses, algae and dirt from internal walls, floors & mouths of pipes of RCC/PVC overhead tanks (Service tanks) of tank capacity upto 500 Litres by cleaning with high pressure industrial vaccume cleaner including removing of dirty water completely using sludge pump set and disposing off the same to a safe distance and applying of anti bacterial sterilization spray to internal surfaces using Zero bacterial compound (Aqua-treat 8888) or equivalent approved chemical and writing the date of cleaning on outside of tank using synthetic enamel paint of white colour over black background with letters of size 50mm height x 50mm breadth complete all as specified and directed |
| 60 | M&L for de-watering, removing all moses, algae and dirt from internal walls, floors & mouths of pipes of RCC/PVC overhead tanks (Service tanks) oftank capacity exceeding 500ltrs upto 1000 Litres by cleaning with high pressure industrial vaccume cleaner including removing of dirty water completely using sludge pump set and disposing off the same to a safe distance and applying of anti bacterial sterilization spray to internal surfaces using Zero bacterial compound (Aqua-treat 8888) or equivalent approved chemical and writing the date of cleaning on outside of tank using synthetic enamel paint of white colour over black background with letters of size 50mm height x 50mm breadth complete all as specified and directed |
| 61 | M&L for de-watering, removing all moses, algae and dirt from internal walls, floors & mouths of pipes of RCC/PVC overhead tanks (Service tanks) of tank capacity exceeding 1000ltrs upto 2000 Litres by cleaning with high pressure industrial vaccume cleaner including removing of dirty water completely using sludge pump set and disposing off the same to a safe distance and applying of anti bacterial sterilization spray to internal surfaces using Zero bacterial compound (Aqua-treat 8888) or equivalent approved chemical and writing the date of cleaning on outside of tank using synthetic enamel paint of white colour over black background with letters of size 50mm height x 50mm breadth complete all as specified and directed |
| 62 | M&L for de-watering, removing all moses, algae and dirt from internal walls, floors & mouths of pipes of RCC/PVC overhead tanks (Service tanks) of tank capacity exceeding2000ltrs upto 3000 Litres by cleaning with high pressure industrial vaccume cleaner including removing of dirty water completely using sludge pump set and disposing off the same to a safe distance and applying of anti bacterial sterilization spray to internal surfaces using Zero bacterial compound (Aqua-treat 8888) or equivalent approved chemical and writing the date of cleaning on outside of tank using synthetic enamel paint of white colour over black background with letters of size 50mm height x 50mm breadth complete all as specified and directed |
| 63 | S&F in repairs 500 ltrs rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height including dismantling old tank complete all as specified and directed. |
| 64 | S&F in repairs 1000 ltrs rotational moulded poly- ethylene water storage tanks (cylindrical vertical with closed top) three layered wall constructionhoisted and fixed in position upto four storey height including dismantling old tank complete all as specified and directed. |
| 65 | S&F in repairs 2000 ltrs rotational moulded poly - ethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height including dismantling old tank complete all as specified and directed. |
| 66 | S&F in repairs 3000 ltrs rotational moulded poly- ethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height including dismantling old tank complete all as specified and directed. |
| 67 | S&Fin repairs PVC lid Cover threaded with universal ring thread male female type fixed with nut and bolt to PVC tank of capacity500 ltr upto3000 litres complete all as specified and directed. |
| 68 | S&Fin repairs 20 mm dia bore ball valve (minimum weight 210 gms) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe including reducer socket or plaine socket of suitable size complete all as specified and directed. |
| 69 | S&Fin repairs25 mm dia bore ball valve (minimum weight 455 gms) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe including reducer socket or plaine socket of suitable size complete all as specified and directed. |
| 70 | Demolitionof unreinforced cement concrete of any description and in anyposition complete all as specified and directed. |
| 71 | M&L for 40 mm thick PCC type B1 (1:2:4) (using 20 mm graded crushed stone aggregates)as in floor finishing surface of concrete topping even and fair (without using extra cement) complete all as specified and directed. |
| 72 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper on walls over a coat of alkali-resistant priming paints over 3mm thick wall care putty complete all as specified and directed. |
| 73 | M&L for preparation of newly plastered surfaces of walls and applying three coats of oil bound distemper including 2mm thick wall care puty complete all as specified |
| 74 | M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper on walls over a coat of alkali-resistant priming paints over 2mm thick wall care putty complete all as specified and directed. |
| 75 | M&L for preparation of old plastered surfaces of walls and applying two coats of Oil bound distemper including 2mm thick wall care putycomplete all as specified and directed. |
| 76 | Taking down and removing shutters of any description exc 1 Sqm but not exc 2 Sqm complete all as specified and directed. |
| 77 | Taking down chowkats or frames not exc 1.5 sqm each (without taking of shutters from the frame) including making good disturbed surface and finishing to match with adjoining surfaces complete all as specified& directed |
| 78 | Taking down chowkats or frames exc 1.5 sqm but not exc 4 Sqm each (without taking of shutters from the frame)including making good disturbed surface and finishing to match with adjoining surfaces complete all as specified& directed |
| 79 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete. |
| 80 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws or welding to steel frame complete. |
| 81 | S&F 150 mm long aluminium anodised handle cast type complete all as specified and directed.. |
| 82 | S&F 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.. |
| 83 | S&F 100 mm long butt hinges medium weight cold rolled fixed to door frame complete all as specified and directed. |
| 84 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness including cover fillets and frame work complete all as specified and directed. |
| 85 | M&L for12mm thick Gypsum board in ceiling as per manufacturer instruction over and including powder coated aluminium snap grid frame work (size of grid 605 x 605mm) supported by hangers 2-4 mm dia GI (up to 1200mm length /as per site requirement) adjusting level fixed to roof slab/walls/wooden/steel members by means of ceiling cleats made out of GI flat 40x3mm size 60 cm long and expansion hold fasteners 12.5mm dia 40mm long and painting two coats of oil bound distemper over a coat of primer and preparatory work complete all as specified |
| 86 | S&F in repairs steel window / ventilators with side / top hung shutters including projecting type hinges with steel handle, steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 87 | Taking down and refixing only in repairs steel window / ventilators shutters including necessary repair work and welding if required complete all as specified and directed. |
| 88 | S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed. |
| 89 | S&F powder coated, anodised aluminium door shutters, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, handles 2 nos, in each door hinges, aluminium anodised snap beading screws etc and necessary packing materials complete all as specified and directed. |
| 90 | S&F powder coated, anodised aluminium window Three Track shutters sliding type, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium powder coated snap beading, aluminium anodised fittings roller wheels, spring catcher, for sliding type shutters and necessary packing materials etc including Aluminium Lock grill complete all as specified and directed. |
| 91 | S&F Anodised aluminium powder coated windows and ventilators shutters, fixed type without sash, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium powder coated snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos), suitable handle (1 No) complete all as specified and directed. |
| 92 | S&F Anodised aluminium grills of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @200 centre to centre, including cutting the grills to proper opening size for fixing and operation of handles and fixing fixing approved anodised aluminium standard section around the opening complete all as specified and directed. |
| 93 | S&F in repairs sheet plain glass4 mm thick, ordinary quality, in squaresnot exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed. |
| 94 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 95 | S&Ffigured glass, pin head type 4 mm thick, not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed. |
| 96 | S&F in repairs sheet plain glass4 mm thick, ordinary quality, in squaresnot exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed. |
| 97 | S&F in repairs sheet plain glass5.5 mm thick, ordinary quality, in squaresnot exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed. |
