|
| 1 | Material and labour for kerb stone precast Plain Cement concrte (1:2:4) type B1 using 20 mm graded finished even and fair without using extra cement and all as specified and directed includingDemolition of old Kerb Stone (Un Reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 2 | Material and Labour for prepration of new surface of concrte or brick or stone surfaces etc of any description exceeding 10 cm width or girth and over a coat of primer applying two coat of synthetic eneamel paint complete all as specified and directed. |
| 3 | Material & Labour for 75 mm thick WBM with coarse aggregate of grading 2 (63 to 40mm) or of grading 3 (50 to 20mm),rolled and consolidated to gradient and camber required with granite trap or basalt complete all as specified and as directed |
| 4 | Preparing surface of unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and as directed |
| 5 | Preparingsurfaceof black top surfaces by burshing wire brushes for removing caked mud etc, sweeping with broomsand finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc,complete all as specified and as directed. |
| 6 | Material & Labourfor scarifying and picking gravelled , macadam or bituminous macadam surfaces in area not exceeding 400 sqm and depth not exceeding 50 mm, complete all as specified and as directed |
| 7 | Material & Labour for Repairs to potholes, any depth not exceeding 1 Sqm each including sweeping free from dust and mud, or scoring sunken surfaces in road, paths etc, cutting around edges to at least 25mm in depth making good around by filling in screened a graded road metal, watering and well ramming (including supply of road metal) using power roller 8-12 tonne capacity and applying evenly a priming/tack coat with bituminous primer @ 6kg per 10sqm using pavingbitumen grade VG-10 on top surface, complete all as specified and as directed |
| 8 | Material & Labour for premixed bituminous macadam (consolidated thickness 75 mm or less) by using 4% bitumen content using paving bitumen any penetration of grade VG-30 (confirming to IS-73-2006) laid, rolled and compacted to required gradient and camber using 8 to 12 tonne capacity power road roller laid with mechanical paver etc complete all as specified and directed |
| 9 | Material & Labour for bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.50% binder content (using bitmen grade VG-30) by weight of total mix, mixed in hot mix plant using design mix and laid with mechanical paver and rolled and compacted using 8 to 12 tonne capacity vibratory tandom power road roller to achive the required compactness, to required camber and gradient complete including cutting edged of road straight and site clearance complete all as specified and as directed |
| 10 | Supply and fixing in repairscat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as permanufactures instructions complete all as specified and directed. |
| 11 | Supply and fix in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery(1.2V/ 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc, complete all as specified and directed. |
| 12 | Material & Labour for applying evenly a priming/ tack coat with bitumen emulsion RS-1 @6 Kg per 10 sqm using on black top surfaces completeall as specified and as directed |
| 13 | Material & Labour for applying evenly a priming/ tack coat with bitumen emulsion RS-1 @ 3kg per 10 sqm using on black top surfaces completeall as specified and as directed |
| 14 | Material & Labour for providing 3.00 mm thick road marking strips (reflective)10 cm wide of specified and shade / Colour using hot thermoplastic material by fully automatic thermoplastic material by fully automatic thermoplastic paint applicator machine fitted with profile shoe, heater driven by skilled operator on road surface including cost of materials T & P cleaning the road surfaces of all dirt , scales , oil grease and foreign materials etc complete all as soecified and directed. |
