Battery terminal (Positive ) with bolt and nut brass heavy duty as per specifications mentioned below: Visual Observations: - Each terminal connector shall be embossed with marking + Ve and –VeDimension: - Dimension should be as per enclosed drawing at annexure \"A\" Crack Detection: -To be free from surface cracks.Material:- Casting brass grade 3 of IS: 292:1961 or F-Cu Zn 38 Pb 2 designated as per IS: 2378Chemical Composition Casting Grade(a) Cu+Ni incidental 64-71(b) Pb 1.0-3.0(c) Sn 1.5 max.(d) Fe 0.75 max.(e) Al 0.01 max.(f) Zn RemainderPlating:- The plating should be smooth free from blisters & rores.Corrosion:- It should be corrosion free. Nuts: - Nut shall confirm to IS: 1367 Nut shall be M-8 type with hardness of 170-210 BHN Bolts: - Bolt shall confirm to IS: 1367 Bolt shall be M-8 type with hardness of 230-270 BHN Marking: - The component shall be marked with the manufacturer’s identification mark.
3
Battery terminal (Negative) with bolt and nut brass heavy duty as per specifications mentioned above 1.01 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
