|
| 1 | Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) excluding GST levied byGOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition/revision with amendments for Rubber Gaskets.100mm dia D.I.K 7 pipes |
| 2 | 150mm dia D.I.K 7 pipes |
| 3 | 200mm dia D.I.K 7 pipes |
| 4 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete Sluice valves - PN -1 (Without by pass)( MJP CSR 21-22 P.N. 134 Item no3) 100mm SluiceValve PN-1 |
| 5 | 150mm SluiceValve PN-1 |
| 6 | 200mm SluiceValve PN-1 |
| 7 | Supply of C. 1. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. 1. Spun Pipes (as per IS-1536 /2001) and D. 1. Pipes (as per IS: 8329 /2000). The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied byGol and GoM in all respect, etc: complete as directed. ( MJP CSR 21-22 P.N. 146 Item no1) 100MM Dia C.I. Mechanical Compression Flanged |
| 8 | 150MM Dia C.I. Mechanical Compression Flanged |
| 9 | 200MM Dia C.I. Mechanical Compression Flanged |
| 10 | Supply of C. 1. Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes (as per-IS-1536/2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538/1993)( MJP CSR 21-22 P.N. 146 Item no2)100MM Dia Jiffy joint |
| 11 | 150MM Dia Jiffy joint |
| 12 | 200MM Dia Jiffy joint |
| 13 | Supply of C. I. Mechanical Joint Double Socket 900 (11/4\") Bends as dimensionally described in Table-14 of IS-13382/1992 complete with sealing fabber gasket of SBR (dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes( MJP CSR 21-22 P.N. 146 &147 Item no3,4,5) 100 x 90 Mech Bend |
| 14 | 100 x 45 Mech Bend |
| 15 | 150 x 90 Mech Bend |
| 16 | 150 x 45 Mech Bend |
| 17 | 200 x 90 Mech Bend |
| 18 | 200 x 45 Mech Bend |
| 19 | Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in respect, inspection charges, transportation to stores / site, and stacking, etc. complete. Plain ended specials or plain ended branch flanged specials of all diameters( MJP CSR 21-22 P.N. 54 Item no7(e)) |
| 20 | Dismantling dead pipeline of M.S./R.C.C./C.I./ P.S.C. and G.I./ A. C. / P. V. C. / S. W. / H. D. P. E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with all leads and lifts including cleaning the surface, etc, complete.( MJP CSR 21-22 P.N. 45 Item no14) + Add 2% MA Charges. 100mm Dia C.I. Pipe |
| 21 | 150mm Dia C.I. Pipe |
| 22 | 200mm Dia C.I. Pipe |
| 23 | Providing and making flanged joints to of all flanged C.L./M.S. pipes classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete( MJP CSR 21-22 P.N. 73Item no8 ) +Add 2% NP Charges 100 MM Dia |
| 24 | 150 MM Dia |
| 25 | 200 MM Dia |
| 26 | Dewatering the excavated trenches and pools of water in the building trenches/pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A9/261)( MJP CSR 12-13 P.N.45Item no14 ) +Add 2% MA Charges |
| 27 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259). ( MJP CSR 21-22 P.N. 42Item no5 ) +Add 10% al NHChargesLift 0.00 to 1.5 m |
| 28 | Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) ( MJP CSR 21-22 P.N. 43Item no7 ) +Add 10%NHChargesLift 0.00 to 1.5 m |
| 29 | Lift1.5 to 3 m |
| 30 | Filling in plinth and floors trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)( MJP CSR 21-22 P.N. 46Item no17 ) +Add 2%MA Charges |
| 31 | Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CIMS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete.100MM Dia D.I.K7 Pipe |
| 32 | 150MM Dia D.I.K7 Pipe |
| 33 | 200MM Dia D.I.K7 Pipe |
| 34 | Providing and laying in situ following grades of Plain Cement concrete of trap/ granite/quartzite/ gneiss metal for foundation and bedding including normal dewatering, form work, compaction and curing, etc, complete. Use of L & T. A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted)( MJP CSR 21-22 P.N. 70Item no2 ) +Add 2%MAChargesIn PCC M150 |
| 35 | Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-200 and M-300 only. Use of L & T. A.C.C.. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.).( MJP CSR 21-22 P.N. 35Item no2 ) +Add 5% AMC Charges |
| 36 | Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, complete. etc. (including cost of binding wire) MJP Corrigendam + Add 2% MA Charges |
| 37 | Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc.complete as directed by Engineer-incharge for following diameters of existing pipeline, irrespective of diameter of branch line. (The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores.)( MJP CSR 21-22 P.N. 60 Item no10)+ Add 2% AMC Charges100 mm Dia pipe line 100 mm Dia pipe line |
| 38 | 150 mm Dia pipe line |
| 39 | 200 mm Dia pipe line |
| 40 | Disposal of excavated materials up to 8 km lead including stacking behind the dam submergence etc complete as directed by engineer by in charge etc complete.( MJP CSR 2021-22 Statement VI P.N.23) |
| 41 | Providing and supplying at site ductile iron single / Double 1074-4 of PN Spheroidal Graphite (S.G.) iron chamber tamper proof air valve wit isolating sluice valve. Valves in accordance with 10/16 rated, with body and bond of ductile iron confirming to EN 1563/15 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & SK guidelines with a coating thickness of min. 250 microns Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845 including transportation charges xcluding GST levied by GOI & GOM in all respect etc, complete (For PN 10 & 16 .(MJP CSR 2021-22 Item no 25, p.n. 145)50MM Dia |
| 42 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flangs of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 a shown in type design together with providing and making flanged joints wherever required and fixing of air valve toe, et complete as per type design and as directed by Enginess charge for following diameters of pipelines type designated)( MJP CSR 21-22 P.N. 140 Item no17 a)+ Add 2% AMC Charges 200 mm to 400mm |
| 43 | Hydraulic testing of C.1./D.L. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting. placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operaharges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor. ( MJP CSR 21-22 P.N. 74 Item no12)+ Add 2% AMC Charges100mm Dia D.I.K7 Pipe Branch line |
| 44 | 150mm Dia D.I.K7 Pipe Branch line |
| 45 | 200mm Dia D.I.K7 Pipe Branch line |
