|
| 1 | Construction of 30000 litres OHT at Mathivilai in Viathurai Village Panchayat in Munchirai Block |
| 2 | Earth work excavation & depositing on bank with an initial lead of 10 metre & initial lift of 2 metre in Hard shift clay, stiff block cotton, hard red earth shales, murrum, gravel, stoney earth, and earth mixed with small size boulders and hard gravelly soil (SS 20B) for foundation including shoring, strutting, baling out water providing danger light wherever necessary depositing the surplus earth on bank and other incedential charges etc., complete and as directed by Officers |
| 3 | First depth of 2m From 0 to 2 m below GL |
| 4 | Second depth of 1m |
| 5 | Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 6 | Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) for foundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the Officers. |
| 7 | Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 8 | For items 1.5m to 4.5m below GL |
| 9 | For items 0 to 1.50m below GL |
| 10 | For items 0m to 4.5m above GL &1.00 m Above G.L |
| 11 | For items 4.50m to 7.32m above GL |
| 12 | For items 7.32m to 10.98m above GL |
| 13 | For items 10.98m to 14.64m above GL |
| 14 | For items above 14.64m & up to 18.30m from GL |
| 15 | Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG10 stiffened with MS angle of size 25 X 25 X 3 mm for boarding laid over I type MS Truss of size 25 X 25 X 3mm about 90cm c/c and supported by 40mm GI pipes (Medium) spaced at 75cm c/c etc complete and as directed by the Officers. |
| 16 | A) PLANE SURFACES |
| 17 | Below G.L. |
| 18 | ABOVE G.L. to 3.30m |
| 19 | 5.30m . to 6.30m |
| 20 | 8.31m . to 9.30m |
| 21 | 11.31m to 12.30m |
| 22 | Curved Surface |
| 23 | 0 to 3.30m from floor level |
| 24 | Square column |
| 25 | Below G.L. |
| 26 | Ground level to 3.30 m |
| 27 | 3.31 to 4.30m |
| 28 | 4.31 to 5.30m |
| 29 | 5.31 to 6.30m |
| 30 | 6.31 to 7.30m |
| 31 | 7.31 to 8.30m |
| 32 | 8.31 to 9.30m |
| 33 | 9.31 to 10.30m |
| 34 | 10.31 to 11.30m |
| 35 | 11.31 to 12.30m |
| 36 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 37 | Supplying, cutting, bending, tying, fabricating and placing in position of steel rods for all RCC works including cost of steel and binding wire etc.( The steel should conform to the relevant ISspecification and supplied with test certificate Fe. 415 grade as per IS specification No.1786/1985 and as amended from time to time) delivery at site of work including loading, freight, unloading, stacking, transit insurance charges, taxes etc. complete.and as directed by the officers. |
| 38 | Supply delivery and fixing of staircase with M30 grade concrete for landings, MS ladder of 0.45m wide using 50x50x5mm MS angles for sides and steps at 0.30m c/c, with GI pipe handrails using 32mm GI pipes for railings and verical support at 0.45m C/c, MS flats (Size 40mm x 5mm ) for horizontal ties at 0.3m c/c and at bottom with Anchor fastener bolts of size 12mm x 75mm including cost of materials labour for fabrication of handrails fixing, painting etc., complete . (WD-M1477) Pg No :92 |
| 39 | Providing 110mm PVC vent cowl arrangements mosquito proof nylon net and as directed by officers (M1041) |
| 40 | Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by officers |
| 41 | 65mm GI pipes WD-M0490 |
| 42 | 65mm Ø GI pipes for over flow & 1xl |
| 43 | 50mm Ø GI pipes for scour pipe 1xl WD-M0489 |
| 44 | 65mm Ø GI pipe for delivery 1x1 pipe |
| 45 | 90mm Ø PVC Couplers (Mould) BIS7834/1975 Part VI |
| 46 | 63mm Ø PVC PVC Couplers (Mould) BIS7834/1975 Part VI |
| 47 | 65mm Ø G.I. Equal Tee plain WD-M0595 |
| 48 | 65mm Ø G.I.Bend WD-M0602 |
| 49 | 65mm Ø G.I. Coupling WD-M0596 |
| 50 | 65mm Ø GI union WD-M0603 |
| 51 | 65mm Ø GI Elbow WD-M0594 |
| 52 | 65x50mm Ø GI Reducer WD-M0532 |
| 53 | 75mmx 63mm PVC Reducer WD-M0094 |
| 54 | PVC Couplers fabricated 6 KSC WD-M0106 |
| 55 | 90 mm x 75 mm PVC Reducer WD-M0080 |
| 56 | 75 mm x 63 mm PVC Reducer WD-M0078 |
| 57 | 65mm Ø GM Gate valve WD-M0618 |
| 58 | 50mm Ø GM gate valve WD-M0618 |
| 59 | Extension of Pipe line |
| 60 | 75 mm PVC Pipe WD-M0011 |
| 61 | 75 mm PVC Couplers fabricated 6 KSC WD-M0106 |
| 62 | 75 mm PVC Bend WD-M0108 |
| 63 | 75 mm PVC Tee WD-M0110 |
| 64 | 75 mm PVC Elbow WD-M0112 |
| 65 | Solvent Cement |
| 66 | Shellock |
| 67 | Earth Work Excavation in all Soil Such as Red earth Etc Complete |
| 68 | Refilling of Excavated earth Pipe laying Charges |
| 69 | Laying of 75 mm PVC Pipe in Proper Gradient |
| 70 | Sub Estimate For Fencing Arrangement |
| 71 | Earth work excavation in hard stiff clay soil with initial lead and lift as per SS 20B for corewall etc., complete. |
| 72 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cu |
| 73 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) |
| 74 | Plain Cement Concrete 1:3:6 (one cement, two M.Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 75 | Supply and Delivery of Chain Link - 2\" x 2\" using 10 Gauge Galvanised IronWire (of all sizes) including cost and conveyance all labour charges etc complete.(MO408)Pg -84 |
| 76 | Supply and fixing of RCC Piller Post of size 0.15mx0.15mx2.10m including cost and conveyance all Labour charges etc complete. |
| 77 | Supply and fixing of Grill Door of size 0.90mx1.55m including cost and conveyance all labour charges etc complete. |
| 78 | Painting two coats over New iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete |
| 79 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} Please Enable Macros to View BoQ information |
