|
| 1 | A. Civil Works:-Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. (As per CSR Item No 30.95) |
| 2 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. (As per CSR Item No 30.94) |
| 3 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.Doors of area 3 sqm and below.[As per CSR-2020item No. 8.26 (a)] |
| 4 | Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position.(CodeIS 2202-1 (1999)(a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-(iii) 30 mm thick [ As per CSR-2020item No.17.27 (a) (iii) ] |
| 5 | Providing and fixing 0.50 mm thick aluminum sheet including cost of necessary fittings i.e. screws, etc.complete.[As per CSR-2020item No.17.44] |
| 6 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.[ As per CSR-2020item No.14.72] |
| 7 | Scraping Cement plaster .[As per CSR-2020item No.8.31 c] |
| 8 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/ Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.[ As per CSR-2020item No.14.127] |
| 9 | Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al,43.4 Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25%-40%. should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.[As per CSR-2020item No.13.27 iii b] |
| 10 | Stripping and stacking iron sheets of a roof including ridging,flashing, eaves boards gutters and down pipes ( As per CSR item No. 8.11 ) |
| 11 | Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete.(a) Plain wing adjustable ridges [ As per CSR-2020item No.13.21 (i) (a)] |
| 12 | Dismantling brick work tile, masonry or tile lining(b) In Cement[As per CSR item No. 8.5 (b)] |
| 13 | 115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure. ( As per CSR item No. 11.36 ) |
| 14 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings for shutter area above 0.50 sqm (Excluding sliding bolt). [As per CSR Item no. 17.23(ii)] |
| 15 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(B) 250mm x 16mm[As per CSR 17.49 (B)] |
| 16 | Providing and fixing M.S. angle iron 40 x40 x 6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect(a)For single rebate.[As per CSR-2020item No. 18.29 (a)] |
| 17 | B. Severage & sanitation:- Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects.(a) 15 mm internal diametre pipe line. (As per CSR Item No 28.63 a) |
| 18 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (As per CSR Item No 30.88 (a), (b) & (c) Eurpoean/Indian/Orissa W.C., |
| 19 | PVC / China Ware Cistern |
| 20 | Wash Hand Basin / Urinal Pot |
| 21 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.[As per CSR item no. 30.74 (iii) (B) (b) and (d)(b) 110mm o/d SWR UPVC pipe lines laid complete. |
| 22 | (d)75mm SWR UPVC pipe line laid complete |
| 23 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.(x) P Trap/Floor Trap 110mm x 75 mm[As per CSR Item no. 30.81 (iii) (B) ( x) |
| 24 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) [As per CSR item no. 30.77c ( d) ] |
| 25 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.(a) Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal[As per CSR item no. 29.60 (a)] |
| 26 | Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect.(As per CSR Item No 30.15) |
| 27 | Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in theground complete.(a) 15mm i/d [As per CSR Item No 28.36 (a)] |
| 28 | Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in theground complete.(b) 20 mm i/d(As per CSR Item No 28.36 b) |
| 29 | Providing ISI market G.M. ferrule as per IS:2692 drilling and taping cast iron pipe lines of all diametres and screwing in ferrule and connection20 mm i/d ferrule heavy duty.[As per CSR-2020item No. 28.34 e] |
| 30 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.(c) C.P.brass 15mm Angle valve without flange.[ As per CSR-2020item No. 30.66 ( c ) ] |
| 31 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.(v) Brass Nozel Bib cock 15mm x 250gm.[ As per CSR-2020item No. 30.65 A (v) ] |
| 32 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (ii) Size 550 mm x 400 mm x 815 mm [As per CSR-2020item No. 30.32 (ii) ] |
| 33 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. [As per CSR-2020item No. 30.20] |
| 34 | Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.[ As per CSR-2020item No. 30.2] |
| 35 | Providing and fixing in position Chinaware European type water closet P trap orS trap ( to the approval of the engineer-in-charge consisting of 10 ltr. PVC flushing cistern PVC short bend 32 mm dia including cost of seat cover complete in allrespect and to the entire satisfaction ofEngineer-in-charge [As per CSR item No. 30.4] |
| 36 | Providing & fixing jet spray with 2\".6\" long PVC pipe (a) with CP brass nut.[As per CSR-2020item No. 30.8 (a) ] |
| 37 | Providing and fixing in position towel rails / ring of approved make fixed in with rawl plugs embedded in walls with brass screws, Acrylic towel Rails size 20mm dia 600mm long[As per CSR-2020item No. 30.58 ( c ) ] |
| 38 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.[As per CSR-2020item No. 30.80] |
| 39 | Providing & fixing & jointing 15 mm i/d GI union coupling as per IS: 1879. 15mm i/d G.I. Union [As per CSR-2020item No. 28. 40 a ] |
| 40 | 20mm i/d G.I. Union[ As per CSR-2020item No. 28. 40 b ] |
| 41 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.(a) C.P.brass 15mm Angle valve without flange.(d) C.P.brass 20mm concealed stop cock with flange[ As per CSR-2020item No. 30.66 ( a & d ) ]C.P.brass 15mmAngle valve without flange. |
| 42 | C.P.brass 20mm concealed stop cock with flange |
| 43 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.(a) G.I. tank nipple 15mm i/d(b) G.I. tank nipple 20mm i/d[As per CSR-2020 item No. 30.98 (a) & (b)] G.I. tank nipple 15mm i/d |
| 44 | G.I. tank nipple 20mm i/d |
| 45 | Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball[As per CSR item no. 30.96 (B) (ii)] |
| 46 | C. Electfification charges : SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push,5Pin 6Amp. (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), MS saddle clamp, PVC Circular junction Boxes (Four way 1½\" deep for walls), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material and painting as required:-(a) Wiring light point[As per CSR item no. 34.07 (B) (ii)] |
| 47 | (vi) Wiring 16/20Amp. power plug control point[As per CSR item no. 34.07 (B) (vi)] |
| 48 | D (02 Nos.SEPTIC TANK) Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineerin-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.(A) Depth upto 1.5 m B.G.(ii) For Ordinary gravel soil having gravel upto 40%[As per CSR item no. 29.2 (A) (ii)] |
| 49 | (B) Where depths of excavation exceeds 2.0 metre below ground levels or total quantity of excavation is more than 100 cum [As per CSR item no. 29.2 (B)] |
| 50 | Cement concrete 1:5:10 With stone aggregate 40mm gaugemixing by mechanical means using concrete mixer volumetric type.[As per CSR item no.10.9 (b) (ii)] |
| 51 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth. [As per CSR item no.11.5] |
| 52 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.[As per CSR item no. 10.15] |
| 53 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.[As per CSR Item no. 9.8] |
| 54 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. [As per CSR item no. 18.18] |
| 55 | Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material.[As per CSR Item no. 14.6] |
| 56 | Floating coat of 1:5mm thick neat cement laid in one operation to the topping. [As per CSR Item no. 14.4] |
| 57 | 12.5 mm thick cement plaster 1:4.[As per CSR Item no. 15.9] |
| 58 | Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD).(A) RCC Man hole cover with Frame.(a) 560mm i/d RCC man hole cover with frame as per ISI.(ii) Heavy duty.[As per CSR item no. 29.34 (A) (a) (ii)] |
| 59 | Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between rotruted legs having 2mm tread on top surface by ribbing or chequering besidesn necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer\"s permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.[As per CSR Item no. 29.35] |
| 60 | Supply of stone / brick aggregate |
| 61 | Filling stone or spall:(a) on Level [As per CSR Item no. 23.44 (a)] |
| 62 | Providing and fixing 100 mm dia PVC Tee ( MR ) |
| 63 | Providing & fixing P.V.C. Bend 110 mm dia for soakage pit (MR) |
| 64 | Providing & fixing P.V.C. cowl(MR ) |
