|
| 1 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M, and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M from the foundaiton trenches. (Where machine can not reach/move). For Building work only. (SOR 251)/2022 |
| 2 | Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. SOR 2022/ S.I. No.281 |
| 3 | Cement Concrete with 2cm. guage approved stone ballast coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of work. SI No-279A/2022 |
| 4 | Providing & Laying of Granular sub base (G.S.B) inncluding all labour materials, taxes, cartager and T&P etc. compate of work as directed by Engineer in charge. (A.R.) |
| 5 | M-150 brick work in 1:4(one part of cement and four part of coarse sand of 2.2.M ) cement mortar in foundation and plinth including supply of all material, labour, T&P etc. required for proper completion of work. ( S.I NO. 307A CH-6)/2022 |
| 6 | Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 meter (200 feet).. (SOR 706)/2022 |
| 7 | 12mm thick plaster in 1:4 cement and coarse sand mortar over brick work minimum thickness not to be less than 10mm including supply all materials labour t&P etc required for proper completion of work ( S.I NO. 584 CH-13)/2022 |
| 8 | Supply & Fixing 80 mm thick Precast cement concrete I-Shape interlocking Red color (Hingh Quality Pigment/ Lanxess, Bayer Chamicals) with top layer of minimum 8mm thickness having plan dimension 200x(l60+120mm) of O.P. cement, Smooth high gloss finish, skid reditant. manufactured from rubber moulds through vibro-compression machanism. The compressive strength of concrere paver block shall not be less than 30MPA (M-30) and wight 5kg per no confirming to IS; 15658-2006 with a 4 cm thick layer of fine sand including cost of material,labour, T & P TAXES etc requried for proper completion of the work as directed by Enginner- in-charge. (S.I NO. 5(2) Page No-51/2022 |
| 9 | Mild steel or iron work in heavy sizes such as trusses; built up gates, door, frames, record racks, roof work, gates etc. wrought to required form including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts and nuts. (PWD S.I No. 503)/ 2022 |
| 10 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie roads, gratings etc. (when not included in an over all rates) wrought to required form, including of supply of steel, bolts, nuts and wastage etc. and fixing (PWD S.I No. 502(C))/ 2022 |
| 11 | Painting two coat over priming coat (including cost of priming coat) on wood surface with superior synthetic enamel paint of standared make brushing to give an even shade and finished and including cleaning the surface all dirt dust and other foreign matter sand paparing and stripping including cost matter and scoured with wire brushes fine steel/ wood scrappers sand papering and knotting including coat of all and supply of all materials, labour and T&P etc. required for proper completion of the work. New Item No- 1(b)+2+4(iii)/2022 |
| 12 | Finishing wall with two coat of water proof cement paint snowecem of approved make and quality of new work with three coat to give and even shade inculding priparing surface by the throughly cleaning and send preparing and supply of all material laber and t&p etc. required for proper completion of the work. SI.No.(660 + 661) 2022 Please Enable Macros to View BoQ information |
