Name of Work:- Mrjksyk Ipism+Ok Punuiqj Ekxz ¼Iz0ft0ek0½ Dk Lkeku; Ejeer Ds Lkfk Uohuhdj.K Dk Dk;Z
Sl. No.
Item Description
1
Providing and applying tack coat with bitumen using bitumen pressure distributor at the rate of 0.3 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.on primed surface.(Including cost of VG-10)
2
Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades to be followed by seal coat of either Type-C as per Technical Specification Clause.511 (Including cost of VG-10)
3
Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 75 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade.(Including cost of VG-10)
4
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
