|
| 1 | Demolition of cement concrete (un reinforced) as in ground floor and paving area of any type and any thickness, complete all as specified and as directed by Engr-in-Charge. |
| 2 | Demolition of cement concrete (unreinforced) in any description and in any position not other wise provided for and removing the debris to a distance not exc 500m from site all as specified and directed. |
| 3 | Taking down cement or cement lime plaster on brick or stone walls etc of any description including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge. |
| 4 | Dismantling of wall and ceiling board (fibre/pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and as directed by engineer in charge. |
| 5 | Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed by the Engr-in-charge. |
| 6 | Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed by the Engr-in-charge. |
| 7 | Dismantling of plain or corrugated Asbestos cement sheeting, thickness including roof covering etccomplete all as specified and as directed. |
| 8 | Dismantling of structural steel work in any description complete all as specified and as directed. |
| 9 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement limemortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed. |
| 10 | Dismantling floor hearth or wall tiling of any description or thickness in floor/dado, apron, etc laid bedded and pointed in any mortar, including removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed. |
| 11 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and as directed. |
| 12 | Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and as directed. |
| 13 | Rendering 10mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 14 | Rendering 15mm thick on stone masonary surfaces or surface other than fair face of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 15 | Rolled mild steel section of angle, tee, flats,and plates as in roof trusses, purlines, rails, etc and the like fixed with angle cleats and connecting plates including welding,Gde FE-410-0 or FE-310-0 complete all as specified and as directed by Engr-in-Charge. |
| 16 | Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge. |
| 17 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge. |
| 18 | Coloured vitrifired ceramic tiles 10mm thick (square) polished, light shade, area of each tiles exc 0.18 sqm but n.exc 0.38Sq.m (min. size 600mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed by Engr-in-Charge. |
| 19 | Vitrified ceramic tiles10mm thick, polished, coloured, light shade in pieces of required width cut out of 600mm x 600mm size, in skirting etc, set and jointed in neat cement slurry and pointed in white or colouredcement to match over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed by Engr-in-Charge. |
| 20 | Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15mm thick screed bed in CM 1:6 etc complete all as specified and directed by Engr-In-Charge. |
| 21 | Machine cut kota stone slab flooring 20-25mm thick over cement sreed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and over andincluding 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed by Engr-in-Charge. |
| 22 | 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in floor base of tiles finished even and rough without using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 23 | 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even & smooth with out using extra cement incl making joints 10mm wide and 30mm deep at spacing n more than 2.5m and at corners at mandatory and filled with sealing compound grade A complete all as specified and as directed by Engr-in-Charge. |
| 24 | False ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the desin (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross\"T\" at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main \"T\" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engineer-in -Charge. |
| 25 | Mild steel framed work as in grills, guard bars railings etc confirming to Fe-290 Gde-E-165 etc complete all as specified and directed. |
| 26 | Pressed steel frames for doors of size 165 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and as directed by Engr-in-Charge. |
| 27 | Cement concrete Type B-2 1:2:4 (using 40 mm graded crushed stone aggregates) as in walls or retaining walls, in pressed door frame of any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts complete all as specified and as directed |
| 28 | 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge. |
| 29 | 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engr-in-Charge. |
| 30 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixing with wooden/steel beads,complete all as specified and as directed by Engr-in-Charge. |
| 31 | Sheet glass 3mm thick ordinary quality and glazing with beading/oil putty in square n/exc 0.5 Sqm each pane complete all as specified and as directed by Engr-in-Charge. |
| 32 | Looking mirror, 5.5mm thick, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and as directed by Engr-in-Charge. |
| 33 | Preparation of new plastered surfaces by using necessary compound of Altek/Birla white putty 1 to 1.2mm thick to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and as directed by Engr-in-Charge. |
| 34 | Preparation of old plastered or un-plastered surface by brooming down or steel wire brushing,scraping down smoke soot, moulds moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty and sand papering and applying one coat of distemper oil emulsion white ortinted,complete all as specified and as directed by Engr-in-Charge. |
| 35 | Prepration of new plaster surfaces ofwallandapplying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfaces complete all as specified and as directed by Engr-in-Charge. |
| 36 | Preparation of new wooden painted surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of aluminium primer complete all as specified and as directed by Engr-in-Charge. |
| 37 | Preparation of new or previously untreated steel and iron surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and as directed by Engr-in-Charge. |
| 38 | Preparation of old painted steel and iron surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and as directed by Engr-in-Charge. |
| 39 | 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed by Engr-in-Charge. |
| 40 | 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge. |
| 41 | 150 mm size mild aluminium handles cast type anodised all complete all as specified and as directed by Engr-in-Charge. |
| 42 | 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and as directed by Engr-in-Charge. |
| 43 | 300mm mild steel ordinary rat tail rod pattern spring including roller plate complete all as specified and as directed by Engr-in-Charge. |
| 44 | Floor door stopper of alumium body and tongue anodised with land drawn steel spring overall lengthof cover plate 140mm fixed with screw, complete all as specified and asdirected. |
| 45 | 1mm thick Mild steel sheet eaves gutters of 150mm dia, glvanised class 3, half round with rounded edges complete all as specified and as directed by Engr-in-Charge. |
| 46 | Excavation over areas not exc 1.5m deep in any type of soil and getting out complete all as specified. |
| 47 | Plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 48 | Walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted, built in cement mortar (1:6) including providing weep holes, complete all as specified and as directed.Note :- PCC bond stone shall be measured and paid separately. |
| 49 | Precast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) set in cement mortar 1:6 as in bond stones of any thickness and size or shape complete all as specified and directed. |
| 50 | Plain Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete, all as specified. |
| 51 | Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought up to course,hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm for graniteor trap stone , all as specified. |
| 52 | Hand packing (any thickness) of broken stone boulders at back of wall over arches etc and raising (or lowering) to the required label. |
| 53 | Rendering 15 mm thick in cement mortar 1:4 on stone masonary surfaces or surfaces other than fair faces of brickwork and finished even & smooth without using extra cement complete all as specified and as directed. |
| 54 | Extra for forming fair finished drain or channel 30 cminner girth in cement concrete using extra cement including forms, moulds, mitred/ stop ends etc complete all as specified & directed by Engr-in-Charge. |
| 55 | PVC pipe 110 mm dia low density of pressure rating 10Kg/Sqcm (in short lengths) fixed in walls as weep holes as in retaining wall complete all as specified. |
| 56 | Raised pointing to random rubble walling uncoursed in CM (1:3) complete all as specified. |
| 57 | Chequered Cement Concrete tiles hard glazed rubber top 20cm x 20cm x 25mm thick made using vibratory mechnical system having glazed top layer with mixture of white cement and pigment, set, jointed in neat cement slurry in floors laid on 20mm thick screed bed complete all as specified and directed. |
| 58 | 75mm thick PCC 1:4:8 type D-1 (using 20mm graded crushed stone aggregate) as in Sub base complete all as specified and directed. |
| 59 | Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick,wateredand rammed to a true surfacecomplete all as specified and directed. |
| 60 | Surface excavation (not exceeding) 30cm deep and averaging 15cm deep and getting out inSoft/loosesoil complete all as specified as directed. |
| 61 | Returning, filling in including spreading, levelling,watering and well ramming in layers not exc 25cm complete all as specified and as directed |
| 62 | Removing surplus spoil to n exc. 50mand deposited where directed at a level not exceeding 1.50m from the starting point., complete all as specified and as directed. |
| 63 | Non skid ceramic coloured tiles 7 to 8 mm thick, area of each tile exc 0.06sqm but n exc 0.11 sqm(min. size 300mm x 300mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 64 | Glazed ceramic coloured tiles in vertical surfaces of wall, of size 450mm x 350mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering as in skirting in Cement mortar 1:4 complete all as specified and directed. |
| 65 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & ottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with uitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 66 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 67 | 150 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 68 | 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 69 | Dismantling water tanks and removing to store exc 250 litre but n exc 500 litre with all necessary fittings complete all as specified. |
| 70 | M&Lfor 3 layer rotational moulded polyethylene water storage tanks any colour 1000 ltr Capacity (Cylindrical vertical with closed top) with 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes all as specified in SSR Part Icomplete all as specified & as directed. |
| 71 | M&Lfor 3 layer rotational moulded polyethylene water storage tanks any colour 2000 ltr Capacity (Cylindrical vertical with closed top) with 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes all as specified in SSR Part Icomplete all as specified & as directed. |
| 72 | 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in position. |
| 73 | GI Unions, 20mm brass to connect iron to polyethylene and fixed complete all as specified and as directed. |
| 74 | S&F in repairs 15 mm size bib taps, chormoum plated with crutch or butterfly handles screwed down,screwed for iron pipes or for brass ferrule and fixed in repairs but long body complete all as specified and as directed. |
| 75 | 15mm size Stop valve of PTMT any colour high pressure screwed down with crutch or butterfly handle screwed both ends for for iron pipe for uinion and fixed complete all as specified and as directed . |
| 76 | Taking up or down steel tubing and connections, includingcleaning for refixing or removal from site to store bore of pipe 15mm. |
| 77 | 15 mm bore steel water Tubing \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 78 | 20 mm bore steel water Tubing \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 79 | Supply and fixing PVC connection 15mm x 450mm length super quality heavy duty cotton threaded with locking nuts and rubber washer complete including taking down the existing unserviceable one all as specified and directed. |
| 80 | Anglecock concealed valve cast cpper alloy fancy type for bore size 15 mm complete all as specified and as directed. |
| 81 | Supply & fixing Brass Nozzle for concelead stop cock of 15 mm dia screwed both ends for iron pipes including fittings as required at site and taking down the existing unserviceable, all as specified and directed. |
| 82 | PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type,white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc.,fixed in repairs,complete all as specified and directed. |
| 83 | Vitreous China urinals, pedestal type, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed. |
| 84 | Urinal spreader of chromium plated for fixing with 15mm bore diapipe. (Minimum weight 60gms), complete all as specified and directed. |
| 85 | S&F in repairs vitreous china wash down water closet pan `P` or `S` trap (pedestal pattern) white including fixing bolts,including connection to drain pipe (or out going pipe) and to flushing pipe,anti syphonage pipe etc complete all as specified and as directed. |
| 86 | Vitreous china wash hand basin, white, flat back, of size 550 x 400mm including 32mm dia CP brass waste coupling, 32mm dia PVC waste pipe, cast iron brackets and making good disturbed surfaces in cement mortar 1:3 or PCC 1:2:4 complete all as specified and as directed. |
| 87 | 75 mm borePVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 88 | PVC (SWR) bends 75 mm bore any radius with oval & access door complete all as specified and as directed. |
| 89 | 75 mm bore PVC(SWR) floor trap with stainless steel grating including jointing to waste pipe fixed in cementwith solvent cement,including taking down old PVC or CI floor trap of any type complete all as specified. |
| 90 | PVC (SWR) branch piece, single (single Y/T) equal or unequal of bore 75 mm complete all as specified and as directed. |
| 91 | PVC (SWR) junction single, (Single T) 75mm equal or unequal complete all as specified and as directed. |
| 92 | Looking mirror, 5.5mm thick, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws completefixed in repair,complete all as specified and as directed. |
| 93 | CP towel rail600 mm complete all as specified and as directed. |
| 94 | Salt-glazed stoneware drain pipes 150 mm laid in trenches and jointed complete all as specified and as directed. |
| 95 | PCC 1:3:6 type C-2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and as directed. |
| 96 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or type B-1 smooth finished, and reforming benching as required pipe in 150 mm complete all as specified and as directed. |
| 97 | Precast RCC cover slab(for manholes etc) cement concrete, 1:2:4, type B-1,using 20mm graded crushed stone aggregate as in slabs with plain faces including setting in CM 1:4 complete all as specified and as directed. |
| 98 | Aluminium sliding window, ventilator shutter with chowkhat of powder coated, 5mm thick glass, stainless steel wire gauge for shutters, etc, without sash bars, aluminium sections (20076 weighting 1.608 Kg/m) (thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 5mm thick tinted glass, stainlee steel wire gauge for shutter three track (02 Nos shutter glazed & 01 No wire gauge) etc, complete all as specified and as directed |
| 99 | Mild steel work in tubular trusses , posts , purlinesincluding special shaped,notched forming holes, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (including rivet or nut and bolts) providing and fitting angle cleats , gusset plates etc also for wedging plumbing, truing up and fixing complete washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161 -1979 grade St-240 complete all as specified and as directed. |
| 100 | 100 mm thick plain cement concrete type D-2 1:4:8 (40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 101 | Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade and complete all as spd and as directed. |
| 102 | Sand filling under floor watering and consolidatedcomplete all as specified and as directed. |
| 103 | Mild steel framed work Fe-410-W (Gde E -250 quality B) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing. Complete all as specified and directed. |
| 104 | Mild steel, plain, black sheet (1mm thick) in wall cladding, steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 105 | 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge. |
| 106 | 150 mm long aluminium bow handles, cast type, anodised and fixed complete all as specified and as directed. |
| 107 | 100 mm Double action spring hinges, mild steel with steel wire spring, stoveenamelled, black complete all as specified and as directed. |
| 108 | 150mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed. |
| 109 | Plain cement concrete 1:3:6 type C-2 (40mm graded crushed stone aggregate), 75mm thick as in plinth protection complete all as specified and directed. |
| 110 | Vitreous china squatting pan, orissa pattern size 580 x 440 mm white with integral foot rests and fixed with cement concrete bedding complete all as specified and as directed. |
| 111 | Supply and fixing in repairs, bib taps long body 15mm chromium plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including elbow/socket etc as required at site complete all as specified and as directed. |
| 112 | Concussivepush button taps of 15mm bore dia of cast iron screwed for iron pipe and fixed complete all as specified and as directed. |
| 113 | Angle cock 15mm chromium plated fittin as required at site and taking down existing unserviceable angle cock all as specified and directed. |
| 114 | Gun metal,globe or gate valves of size 25 mm dia with iron wheel head,screwed both ends for iron pipes including fittings as required at site and taking down the existing unserviceable, complete all as specified and as directed. |
| 115 | Excavation in trenches in any type of soil not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or for shafts, manholes, pier holes etc n.exc 10 sqm on plan and not exc 1.50m in depth and getting out inany type of soil, complete all as specified and directed by the Engr-in-charge. |
| 116 | Demolition and breaking up of drain pipe of 150 mm to 300 mm dia (Salt glazed ware, AC or reinforced concrete) set in cement mortar, complete all as specified and as directed. |
| 117 | Concrete bed to drain pipes of bore 200 mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports, complete all as specified and as directed.Note:- (i) Thickness of bed belew barrel ofpipe -10 cm. (ii) Width of bed :- outer diaof pipe plus 30 cm. |
| 118 | S&F HDPE DWC (Double wall corrugated) pipes confirming to IS-16098 of DN/ID 180mm dia, Pressure rating SN-08 fixed with rubber seal and coupler required with and including suitable bends 90/60/45 degree etc Single Y Jn complete as required fixed as per manufacturere instructions laid in trenches for sewage linescomplete all as specified and directed by the Engr-in-charge.Note :- Rates included for pipes, bends any size any type Y Jn coupler/adapter etc required and net total length of pipes with fittings shall be measured for payment purpose. |
| 119 | Cutting into exising manholes for connecting new drains (internal dia of pipe n.exc 200 mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) smooth finished, and reforming benching complete all as specified andas directed. |
| 120 | 100mm thick (Factory Made) M-30 Precast cement concrete 1:2:4 type B-1using 20 mm graded crushed stone aggregateas in cover slabs ( for manholes/drain etc) of size and shape as directed by Engr-in-Charge including necessary Reinforcement complete all as specified and directed by Engr-in-Charge.Note:- Size and spacing of reinforcment shall be as 10mm dia @ 100mm c/c spacing in both directions. |
| 121 | RCC slab 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in slabs supported on wall, beams etc or similar works, complete all as specified and directed. |
| 122 | Mild steel TMT bars 8mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia), complete all as specified andas directed. |
| 123 | Cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate ) as in surface channel or drain etc, complete all as specified and as directed. |
| 124 | Extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and as directed . |
| 125 | 15mm thickrendering on fair faces of brick/concrete surfaces in cement mortar 1:4, mixed with water proofing compound,and finished even and smooth withoutusing extra cement, complete all as specified andas directed. |
| 126 | Supply only integral water proofing compound conforming to IS-2645, complete all as specified andas directed. |
| 127 | Use and waste formwork to sides and soffits of suspended slab such as roof slab,floor slab , landings and similar work not exceeding 200mm thick (horizontal or slopping) for rough finshed surface of concrete flat, complete all as specified andas directed. |
| 128 | M&L loose filling with broken bricks of guage 80 to 150mm as in soakage pits including cleaning of existing sludge and other foreign materials complete all as sepceifed and directed. |
| 129 | Taking down carefully alu./copper point wiring ,light, fan socket, or power complete with (fittings such as old rusted steel conduit switches ceiling rose pendants, regulators, socket etc to be measured separately ) removing material to store fordisposal by Sch of credit and making good to disturbed surfaces of walls floors etc and all as specified. |
| 130 | Dismantling and taking down fluorescent tube light single/double of any wattage or sizefittings for repair or replacement of burnt/worn out accessories or carrying to MES store for reuse or taking in schedule of credit |
| 131 | Taking down unserviceable / serviciable MCBDB\"s/AC\"s box including MCCB/MCBs takeing in schedule of credit of any size/rating complete all as specified and directed by Engr-in-charge. |
| 132 | M&L for Point wiring using approved color coading as per IS code (Red,Black and Green for single phase circuit) with multi stranded copper condutor 1.5 Sqmm nominal cross section area,single core,PVC insulated and unsheathed FRLS cable 1100V grade,in and including medium grade,PVC concealed conduit ISI marked of dia not less than 20mm and conduilt accessories concealed in wall/roof/floor etc with terminated to new pressed flush metal box and readily available cover with outer plates and inner plates etc, suitable for mounting modular type switches , sockets, fan regulators etc PVC insulatedPVC insulated multistranded copper condutor 1.5 sqmm nominal cross section area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following:-One light Pointcontrolled by one,one wayswitch. |
| 133 | All as per item No 132.00 here in before but one ceiling fan controlled by one way switch. |
| 134 | All as per item No 132.00 here in before but 3 Pin 5 Amp modular Socket on the same board, complete all as specified. |
| 135 | All as per item No 132.00 here in before but 3 Pin 5 Amp modular Socket on independent board complete all as specified and directed. |
| 136 | All as per item No 132.00 here in before but M & L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm drawn through in and includingPVC conduit size of not less than 25mm concecled in wall / surfaceincluding sutiable new annealed sunken boxes,modular frame and cover plate for fixing of modular switch, socket and regulator along with earth wire of PVC insulated, unseathed,1100 V grade cable multi stranded copper conductor of size 2.5 sqmm and for one 5 pin modular socket outlet two in one 16/6 amps on anindependent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green and making good, disturb surface as it is complete all as specified and directed. |
| 137 | Modular switchsingle pole one way 6 amps 240 volts with polycarbonate body complete all as specified and directed. |
| 138 | Modular socket 6 amps 5 pin flush type, 240 volts. with polycarbonate body. complete all as specified and directed. |
| 139 | Modular socket outlet , 5 pin 6ampsand 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed. |
| 140 | Modular switch single pole one way 16 amps 240 volts with polycarbonate body complete all as specified and directed. |
| 141 | Supply and fixing modular electronic fan regulator, step type, two module 120 watt 230 volt and making all necessary connections complete all as specified and directed. |
| 142 | Ceiling rose, 3 phase, PVC/polycarbonate, surface type bakelite type 65x50mm three terminals complete all as specified and directed. |
| 143 | LED Light fitting 20 watt High-quality materials and design. Extruded aluminium housing enhances safety with High quality PC Diffusers Reliable and robust housing structure, maximize the endurance over the life time slim Integrated design, easy to install Efficacy: 110 lm/W and also available in warm white and natural white complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling complete all as per directed by Engr-in-charge. |
| 144 | LED Light fitting 10 watt mirror light, robust and high performance batten. This LED luminaire comprises of extruded channel in thermally conductive material. High translucent serrated milky white diffuseris used to get glare free and smooth light distribution. Efficacy: 110 lm/W. Also available in warm white and natural white complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting complete all as per directed by Engr-in-charge. |
| 145 | Supply & fixing in replacement of 35 Watt LED security light fitting with ASTRA NEO street lights are made up of pressure die cast housing with toughened glass and high power LED\"s with secondary optics and IP66 protection and with 0.6 mtr long 20/25 mm (as per manufacturer standard)dia GI Pipe in 45 degree bend shape and necessary clamping devices required at site complete all as specifiedand directed. |
| 146 | Supply and fixing of MCB Metalic Distributition board 12 way, double door, 230 Voltsconcealed flush to wall for mounting MCBs factory made , fabricated out of CRCA sheet fitted with DIN channel, neutral link and approriate rated bus bar DBs shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature , between powder paint process to ensure smooth finish and protection against corrsion atmosphere. the DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs, DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all ways as specified, the DBs shall be of IP 43 protection complete all as specified and directed by Engr-in-Charge. |
| 147 | MCB SPN 240 volts, 40 amps, 50HZ, 10 KA. , ‘B’ seriescomplete all as specified and directed. |
| 148 | MCB SP 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘B’ seriescomplete all as specified and directed. |
| 149 | Taking down ceiling fan /exhaust fan complete ,and rehanging ceiling fan / exhaust fan and connecting up including provision of three core copper conductor cable 1.5 sqmm nominal cross sectional area and length not less than 0.5 mtr from ceiling rose to fan complete all as specified and directed.Note :- Fans shall be deposited to MES store yard. |
| 150 | Ceiling fanscomplete withblades,down rods electronic regulators andaccessories 230 V,1200 mm sweep, min air delivery 210CFM with service value 6.00 BEE 5 star rated withbrush less direct current motor (BLDC) complete all as specified and as directed. |
| 151 | Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work charcoal dust, common salt, PCC 1:3:6type C-1 chamber with cover and RCC1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia PGI funnel and wire mesh all as shown in electrical plate No 3 of SSR Part-I connected to ear thing test point all as specified or indicated including testing on completion all as directed by Engr-in-Charge. |
| 152 | GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia complete all as specified and as directed. |
| 153 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB of 16 to 32 Amp , 240 V capacity complete all as specified and as directed |
| 154 | S&F in replacement of MCB SPN DB IP 43 metallic distribution boards suitable for MCB as incomer, 8 way , 240 Vo AC, double door type of sheet steel phospotised powder painted with 100 Amps, neutral bars, earth bars concealed flush in wall complete all as specified and as directed. |
| 155 | Exhaust fans steel body, AC single phase 230 V of size 300 mm sweep and blades, frames and louvers complete all as specified and as directed. |
| 156 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
