|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and as directed. |
| 2 | Dismantling posts/strut (wood, steel or RCC ) any section embeded in naturalor concrete ground including taking out embeded portion and making good complete all as specified and direct. |
| 3 | Dismantling fencing wire mesh any type or in any position complete all as specified and as directed |
| 4 | M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete |
| 5 | M&L for cement concrete type C2 1:3:6 (40mm gradedaggregates) in foundation filling and mass concrete . |
| 6 | Supply and fix Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde-E-250) quality-B as in bracing members etc complete including necessary cutting , welding in any shape and in any position / direction in hangar doors etc complete all as specfified and as directed by the Engineer-in-Charge. |
| 7 | Excavation in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and mixed with earth around, inlayers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface in soft/loose soil complete all as specified and as directed. |
| 8 | S&F PVC Vinyl coated GI Chain link mesh of size 50mm x 50mm made out of 3.60mm dia GI Wire 1.00mm thick on both sides PVC Coating all as specified and as directed Note :- (a)The dia of mesh wire after PVC Coating will be 5.60mm.(b)The PVC Coating shall be green in colour (c) The GI Chain link mesh with PVC Coating shall be weighed for the purpose of payment.(d) The weight of chain link shall not be less than 5.6kg/sqm with and including PVC coating |
| 9 | M&L for providing pre cast reinforced cement concrete type B-1 1:2:4 (20mm graded aggregate) in Columns,pillars,piers,posts and struts average section area exc 100 sqcm and n.exc 250 sqcm complete all as specified and as directed. |
| 10 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed. |
| 11 | M&L for TMT bars 5 mm dia and over upto and including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips as in stirrups, spacer, and binder complete all as specified and as directed. |
| 12 | M&L for round bars 5 mm dia and over upto and including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips as in stirrups, spacer, and binder complete all as specified and as directed. |
| 13 | S&F in repair mild steel bolt having dia of neck exc 12mm but not exc 20mm purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 30 cm long complete all as specified and as directed. |
| 14 | M&L for preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxideprimer complete all as specified and as directed |
| 15 | S&F mild steel works such as hand rail, half round or other stock section or core for wooden hand-rail straight portion drilled and counter sunk for baluster, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing with bolts post and strut in fencing including cutting tops to shape as directed dilling holes notcning for wire etc, flat iron fillets for securing fencing mesh including all necessary drilling, bolting or rivetting etc and similar work using rolled section confirming toFe-290 Gde E-165 complete all as specified and as directed. |
| 16 | M&L for preparation of new steel surfaces of any description not otherwise described not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxideprimer complete all as specified and as directed |
| 17 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxideprimer complete all as specified and as directed |
| 18 | Dismantling of Brick or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed. |
| 19 | M&L for providing precast cement concrete block masonry type C1 1:3:6(20mm graded aggregate) with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed. |
| 20 | M & L for rendering 15mm thickin cement mortar 1:4 on fair faces of brick work or concrete surfaces onwall completeall as specified and directed. |
| 21 | M&L for preperation of new plastered surfaces on brick/concreteof walls/ fencing posts etc and applying two coat of antifungal weather proof emulsion paint over a coat of primer, complete all as specified and directed. |
| 22 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE -290 Gde E-165 |
| 23 | Schedule of Credit (Minus) Rs.9173.00NOTE: Bidder shall insert credit amount of Rs. 9173.00 as ratein Green field under Col-13. |
