|
| 1 | Materials |
| 2 | Stone Aggregate(single size):40mm nominal size |
| 3 | Stone Aggregate(single size):20mm nominal size |
| 4 | Stone Aggregate(single size):10mm nominal size |
| 5 | Coarse sand(zone III) |
| 6 | Portland Cement |
| 7 | Stone for masonry work |
| 8 | Quarry Waste |
| 9 | Through andbond stone size 24x24x39cm |
| 10 | Solid blocks of size 30 x 20 x15 cm |
| 11 | Solid blocks of size 30x20x20cm |
| 12 | Pincoda wood scantls |
| 13 | Structural steel such as tees,angles,channels and R.S joists |
| 14 | Red oxide Zinc chromate primer |
| 15 | PVC Bend 63mm dia.4kg/cm2 |
| 16 | PVC Pipe 63mm outer dia.4kg/cm2 |
| 17 | Twisted steel/deformed bars |
| 18 | Gravel 5mm to 10mm |
| 19 | Boulder 50mm to 200mm |
| 20 | GI Trafford profile sheet .35mm thick |
| 21 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 22 | Galvanised steel J or L hooks 8 mm dia |
| 23 | Mild steel tubes hot finished welded type |
| 24 | Precoated Aluminium Trafford sheet 0.45mm thick |
| 25 | wire nails |
| 26 | welding by electric plant |
| 27 | Bitumen washer |
| 28 | G.I .Limpet washer |
| 29 | Anjili wood scantls |
| 30 | Hire charges of concrete Mixer 0.25 to0.40 cum with Hopper |
| 31 | Vibrator (Needle type 40mm) |
| 32 | Mild steel tubes electric resistant or induction butt welded |
| 33 | Mild steel round bar 12mm dia and below |
| 34 | Flats up to 10mm in thickness |
| 35 | Flats exceeding 10mm in thickness |
| 36 | Mild steel plates |
| 37 | Mild steel rivets |
| 38 | 20mm dia holding down bolts |
| 39 | Factory made glass reinforced plastic door frame 90x45 mm i/c carriage |
| 40 | 30mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage |
| 41 | Second class teak wood in scandling |
| 42 | Second class teak wood in planks |
| 43 | Mild steel sheets for tanks |
| 44 | 24mm thick Factory made shutters with styles,rails and panels of PVC exteucted sections in white.grey or wooden finish |
| 45 | Fine sand (zone IV) |
| 46 | Vitrified floor tile 60x60 cm |
| 47 | Ceramic Glazed Tiles Ist quality minimum thickness 5mm in all colours shades and designs except burgundy,bottle green black |
| 48 | Ceramic Glazed Tiles Ist quality 300x300mm in all shades and designs of white,lvory,gray,Fume Red brown etc. |
| 49 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 50 | Plastic emulsion paint |
| 51 | Stainless steel kitchen sink -without drain board 470x 420mm bowl depth 178mm |
| 52 | C.I. bracket for wash basin and sinks |
| 53 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700mm i/c PVC waste fittings |
| 54 | Vitreous China orrisa type w.c pan size 580mm |
| 55 | Flushing Cistem P.V.C. 10 its capacity (low level)(white),(with fittings,accessories and flush pipe) |
| 56 | 100mm S.C.I. trap with vent heel |
| 57 | PVCpipe 25mm outer dia.10kg/cm2 |
| 58 | PVC Elbow 63mm dia. |
| 59 | PVC 45 degree Elbow 63mm dia. |
| 60 | PVC door Elbow 63mm dia |
| 61 | PVC bend 63mm dia |
| 62 | PVC Elbow 110mm dia. |
| 63 | PVC door Elbow 110 mm dia |
| 64 | Material-75mm valve |
| 65 | Polyethylene water storage tank with cover and suitable locking arrangement |
| 66 | PVC 45 degree Elbow 110 mm dia |
| 67 | PVC pipe 63 mm outer dia.6kgf/cm2 |
| 68 | Vitreous China flat back wash basin 550x400 mm |
| 69 | 15mm C.P. brass tap |
| 70 | C.P. brass waste 32mm |
| 71 | PVC pipe 110 mm outer dia 4kgf/cm2 |
| 72 | PVC pipe 20 mm outer dia.10kgf/cm2 |
| 73 | PVC pipe 160mm outer dia 4kgf/cm2 |
| 74 | PVC Reducer 63x50mm dia |
| 75 | PVC Socket/coupling 63 mm dia |
| 76 | PVC end cap 63mm dia |
| 77 | PVC pipe 63 mm outer dia.4kgf/cm2 |
| 78 | PVC 45 degree Elbow 63 mm dia |
| 79 | PVC Tee 63x63x63mm dia |
| 80 | PVC 160 mm dia 4 Kg/cm2 gutter pipe Please Enable Macros to View BoQ information |
