|
| 1 | Supplying, fitting & fixing of screw rod having square thread of 1.5/2 T.P.I,Material bright steel [EN-8/EN9/forged Cl-4 (45C8) as per IS :1875 1992/latest Revision]. dia and thread length as required and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required as per direction of Engineer-In - Charge. The cost includes cost of material, manpower employed, consumables like cutting tools, emery paper, cloths, hire charges of machineries, tools & tackles, grease, mobil etc including carriage loading & unloading as per direction of Engineer in charge. upto length above 3 metre upto 5 metre. |
| 2 | \"Fabrication , supply, erection and commissioning of embeded parts consisting of seal beam, Guide channel with all accessories for vertical gate of canal/river made of MS material consisting of angle, channel, beam, plate,flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries ,Manpower, Cutting, Aligning, Anchoring,Welding,Finishing,Consumables,Carriage and all overheads with all leads and lifts complete as per specification (without painting).Remarks: Cost for civil works to be taken from PWD (R) directorate seperatly \"Guide channel/Guide path/Top seal path |
| 3 | Supplying, fitting & fixing of screw hoisting arangement made of MS bottom plate, top plate, coller with necessary holes on base plate and top plate to accomodate thrust bearing of suitable size as per approved drawing & design and as per direction of Engineer in charge. The cost includes cost of ms plate as per IS : 2062 -2011/ latest revision, man power employed for dismantling and fitting fixing, consumables like cutting tools, bolt & nuts of required size,hire charges of machineries, like lathe/shaping machine, grinding machine,drilling machine, tools & tackles etc including carriage loading & unloading but excluding the cost of lifting Nut/Bush, thrust bearing & wheel supplied seperately. |
| 4 | Supplying, fitting & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. |
| 5 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) Supply & fitting fixing of round strand (steel core/fibre core) steel wire rope (ungalvanised, IWRC) of 6x36 construction of 1960 tensile designation as per IS-2266 (make: Usha Martin, Bharat Wire Ropes ltd or BIS approved makes),rope clamp with Dishakle and fitting fixing of said material with correct alignment and position inclusive of all cost of labour, T&P, scaffolding charges & all other incidental charges as necessary to complete the job in all respect upto the satisfaction of E.I.C. 16 mm dia (steel core) |
| 6 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) Gear & Pinion (Cast steel) |
| 7 | Supply and Installation of Gearing arrangement comprising of high precision Bevel Gear & pinion on existing hoist nut along with supply, fabrication of suitable MS frame, Shaft, Plummer Block fitted with gun metal bush, flange coupling and required keys etc as per following specification and detail. Bevel Gearing specification: No of Teath of Pinion (Zp) =20, Gear ratio =3:1,Module=6 No of teeth of Gear (Zg)= 60 Material: HSLA steel Finish: High precision. Specification of other components: a) MS frame shall be assembled with existing MS pedestal, capable to withstand static & dynamic load of Actuators. Approx weight is 15 kg (Deviation in weight shall be adjusted through the rate available in USOR(M&E) during billing/payment). b)Shaft: 01 No,30 mm Dia, length 450 mm approx., cut 08 job Per job with keyway, Matl- SS316. c) Plummer Block:02 No, ID-50 mm, fitted with Gun metal bush of thickness 10 mm. Matl: Cast steel. d) Flange coupling: Hub flange coupling in pairs ID & OD=30 mm & 100 mm Respectively. Matl- Cast steel. |
| 8 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) Poul Ratchet Locking Arrangement |
| 9 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) Shaft /Pin with key ways made of SS-304 |
| 10 | Fabrication, supply, erection and commissioning of embeded parts consisting of hinge bracket with its accessories for vertical flap gate shutter of distributories/branch canal/minor canal made of MS material consisting of angle, channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction of Engineer in charge. The cost includes cost of Materials, Machinaries , Manpower, Cutting,Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). |
| 11 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) M.S Manual Operating handle. |
| 12 | Supplying of M.S bolts with nut for clamping Rubber seal as per direction of EIC |
| 13 | Cost for supplying and fitting fixing of angle type rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for dismantling & fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/flat plate, bolts, nuts and washer. size: (88mm+60mm+08mm) x 14mm(thick) |
| 14 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) Manual operating mechanism Plummer block(CI) |
| 15 | Supplying of M.S flat for clamping Rubber seal with hole as per direction of EIC |
| 16 | Supplying, fitting & fixing of C.I wheel in the screw hoisting system for lifting or lowering the draw shutter.The wheel consisting of suitable size hub to accomodate any size of G.M/C.I nut, rim dia 32mm and four nos arm made of minor dia 30mm. & major dia 36mm rod complete or as per approved drawing & direction of the Engineer-in-charge.The cost includes cost of materials, manpower employed for dismantling and fitting fixing, consumables like cutting tools, welding rod, hire charges of machineries, like lathe machine, grinding machine, tools & tackles etc including carriage loading & unloading. Upto 60 cm. dia. Cast Iron wheel |
| 17 | \"Fabrication , supply, erection and commissioning of embeded parts consisting of seal beam, Guide channel with all accessories for vertical gate of canal/river made of MS material consisting of angle, channel, beam, plate,flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries,Manpower, Cutting, Aligning, Anchoring, Welding, Finishing, Consumables,Carriage and all overheads with all leads and lifts complete as per specification (without painting).Remarks: Cost for civil works to be taken from PWD (R) directorate seperatly \"Insert plate welded with J hook |
| 18 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) Sheve/Pulley(CS) |
| 19 | \"Fabrication , supply, erection and commissioning of embeded parts consisting of seal beam, Guide channel with all accessories for vertical gate of canal/river made of MS material consisting of angle, channel, beam, plate,flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries ,Manpower, Cutting, Aligning, Anchoring, Welding, Finishing, Consumables,Carriage and all overheads with all leads and lifts complete as per specification (without painting). Remarks: Cost for civil works to be taken from PWD (R) directorate seperatly \"Seal beam |
| 20 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) MS cover for central drive unit and rope drum unit |
| 21 | Supply of bearings Bearing no.51215 (SKF) (Thrust bearing) |
| 22 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) Bush (CI) |
| 23 | Fabrication , Supply, erection and commissioning of new Flap/Fall board shutter of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062-2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling,Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting).Width of Gate shuteer size upto 4 metre |
| 24 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) Rope Drum FG 400 |
| 25 | Painting of embedded parts, all types of gates, stoplogs and barscreen/gratings etc on prepared surfaces with one coat of inorganic zinc silicate primer (airless spray preferred)70+/ - 5 micron and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. |
| 26 | Cost for supplying and fitting fixing of bulb/musical node/J- type rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/flat plate, bolts, nuts and washer. solid bulb: size- 40Ø 140 X 12 mm |
| 27 | Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting,Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting).Width of Gate shuteer size above 2 metre |
| 28 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) Guide Roller/Load Roller (C.S) |
| 29 | Supply and fabrication of new stainless steel plate/flat (AISI - 304) of suitable size on seal beam / roller track/ slide track/ side seal seats/ top seal seat by welding (SS) as per direction of the Engineer-in-charge including cost of Materials, Machinaries , Manpower, Cutting, Aligning, Welding, Finishing,Consumables, Carriage and all overheads with all leads and lifts complete as per specification. |
| 30 | Supplying, fitting & fixing of cast iron pedestal stool of suitable size,conforming to I.S 210 of latest revision and as per approved drawing, & direction of Engineer in charge. The cost includes cost of materials, manpower employed for dismantling and fitting fixing, civil works consumables like cutting tools, anchor bolt of required size, hire charges of machineries, like lathe/shaping machine, grinding machine, drilling machine, tools & tackles etc including carriage loading & unloading. |
| 31 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) Base frame (MS) |
| 32 | Cost for supplying and fitting fixing of Flat rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate shutter as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer. 100 x 14 mm Please Enable Macros to View BoQ information |
