|
| 1 | Cleaning of the site for warkable etc. All complete. (Non Scheduled) |
| 2 | Excavation in foundation in ordinary soil (loam, clay or sand) including, lift up to 1.50 m and lead up to 30m and including filling watering and ramming of oxcavated the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge up to a distance of 30m form the foundation trenches. (Rate including Royalty of earth also) (4-Chapter S.I.NO.- 251) |
| 3 | Earth work in Cutting or in embankment in rodinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required lavels and slops and also including 1.5 m lift and 30 m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge etc. all complete. (20-Chapter PWD.SCH.No.253(a))PWD Sheduled 2015 |
| 4 | Providing and laying cement concrete in 1:5:10 (1 cement :6 fine sand 12 stone ballast 40 mm gauges) and curing complete, including cost of form work in foundation and floors. (5-Chapter S.I. No. 01) |
| 5 | Class-150 brick work in 1:6 cement and Coarse sand 1.25 fineness modulus mortor in Foundation including supply of all material, labour and tolls and plants etc. All complete. (CP-6 S.I. No. 01) |
| 6 | Providing and laying D.P.C. 40cm. Thick with cement concrete consisting of one part cement 1.5 part of coarse sand and three part of approved 10mm grade stone grit and including water proofing material as directed by the engineer-in-charge in the proportion as specified by the manufacturer. {Chapter No.07 Si.No.361} |
| 7 | Class-150 brick work in 1:4 Cement and Coarse sand 1.25 fineness modulus mortor in Super Structure including supply of all material, labour and tolls and plants etc. All complete. (S.I. No. 303+309) |
| 8 | M-150 in 1:3 with cement and coarse sand in Sub structure for 12cm. thick wall including supply of all material labour T & P etc. required for proper completion of work. {Chapter No.6 Si No.307+310(A)} |
| 9 | R.c.c work with cement approved coarse sand and 2cm (3/4) gauge approved stone ballast in the proportion 1:2:4 in R.cc Slab supply of reinforcement and its bending butinculding its fixing and binding the same with 24 bwgi binding wire and including necessary oentering and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than M-150. (5-Chapter S.I. No.-284) |
| 10 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in and an overall rates) brought for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (b) 10mm to 12mm tor.(Chapter No. 10 S.I. No. 504(B)) |
| 11 | 12mm cement plaster in single coat on rough site of single of half brick wall for interior plastering up to floor to level including internal rounded angles not excluding 80mm in girth and finished even and smooth. (b) 1cement : 6 Coarse sand. (Chapter No.13 Si.No. 583 (iii)) |
| 12 | Mild steel of iron in heavy size such as trusses built up gates record reck, roof work gates etc. brought to required form including drilling holes revitting are welding where neccesary, and also including supply of steel bolts , nuts wastage etc. and there fixing required for completion of the work. (Chapter No.10 S.I. No.503) |
| 13 | Supply & fixing of flush doors, commercial quality conforming of I.S. 2202 part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplies deparmentally.(a) 30mm thick. {Chapter No.09 S.I.No. 470(a)} |
| 14 | Supply and Fixing Oxided Iron Fitting etc. all complete (None Scheduled) |
| 15 | Providing and fixing of door & ventilater etc. all complete. (DSR No. 9.6.1) |
| 16 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufactured and of required shade and undecorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applied @ 0.75Ltr./10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work for two coat. |
| 17 | Paint of the two coat over priming coat including cost of priming coat new steel gril etc. all complete.(15-Chapter Sr.No.1a+2a+642) |
| 18 | Supply and fixing 6mm (1/4\") thick chine white glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labor for porper completion of the work. (Chapter No.14 S.I. No. 628) |
| 19 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm Sand Cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the wall and floors wherever required : White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with with integral type foot rests. (Chapter No.24 SI. No.1) |
| 20 | Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps. (Chapter No.24 Si.No.3A) |
| 21 | P/L 18mm white Granite Stone (Super Quality) flooring over 25mm thick base of cement mortar 1:4 (1 Cement : 4 Coarse Sand) laid and jointed with white cement slurry including rubbing and polishing complete. {Chapter No.14 Si.No.(a)} |
| 22 | Supply and fixing Pvc. sintex water tank etc. All complete. (19-Chapter Sr.No.2) |
| 23 | Supply and lowering of 110 mm dia 6 kg/cm2 PVC pipe (Phenolex or apb by E/I) all complete. (I.S.I. Mark only) |
| 24 | Providing and Fixing PVC pipe conforming to ISI make working pressure 6 kg/Cm including testing labour T&P etc. all complete.140mm diameter. (Chapter No.23 SI.No. 32(iv)) |
| 25 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc.(d) 25mm nominal outer dia pipes. (Chapter No.23 SI.No.8C) |
| 26 | Supply & Fixing of brass Bib Cock of approve quality etc. all complete. (Chapter No.21 Si.No.43) |
| 27 | Supply & Fixing of C.P. brass Stop Cock (Conceled) of Standerd design of approve quality etc. all complete. (Chapter No.21 Si.No.44) |
| 28 | Providing and Laying Vitrified Tiles 500x500mm Size (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand manufacture, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints etc. all complete. (Chapter No.14 Sr.No.13 New Item) |
| 29 | Supply and Fixing of Light Fitting Switch Board. (None Sheduled) |
| 30 | Supply and Fixing Wiring of Light Point. (None Sheduled) |
| 31 | S/L/J of 20mm dia PVC Cunduct Pipe etc. all complete. |
| 32 | Supply & Fixing of wiring Sub Main. |
| 33 | Supply & Fixing of Plug Point 15mm. |
| 34 | Lettering & Painting of wall etc. all complete. |
| 35 | Supply & Fixing of 27watt. CFL etc. all complete. |
| 36 | Providing & laying of G.S.B. with graded material including spreading, dressing watering and ramming etc. All complete. (Non Scheduled) |
| 37 | Providing and laying of Shaped precast Interlocking tiles of thickness 80mm thick (Rubber Molded (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mmn thick loacal sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. Including VAT. (Chapter No.20 Si.No.19c) |
| 38 | Disposal of Refuse Malva mixed soil up to 8km. distance loading & unloading etc. all Complete. (None Scheduled) |
| 39 | Carriage of material by head load upto 90 meter distance etc. all complete. |
| 40 | Installation of Submersible pump ISI marked (1.50HP) etc.all complete. |
| 41 | Supply & Fixing Granite Stone Work Display Board (Size 2.50ft x 4.00ft) including Painting, Lettering etc. all complete. (None Schedule) |
| 42 | Dismantiling birck work or stone work in lime or cement mortar and including stacking of materials as directed by E/IC with in a distance of 60meters (200 feets). (17-Chapter PWD. No.692)PWD Shedule 2015 |
| 43 | Making connection of drain of sewer line with existing man hole including breaking into and making good the walls, floors with cement concrete 1:2:4 cement plastered on both side with cement mortar 1:3 finished with a floating coat of neat cement and making necessary channels with cement concrete 1:2:4 for the drain etc. all complete. (Chapter No.25 Si.No.9) |
| 44 | Constructing brick masonary chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. cover with frame (light duty) 455x610mm Internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg), R.C.C. top slat with 1:2:4 mix (1 Cement : 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1 :5:10 (1 Cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortal 1:3 (1 Cement : 3 Coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard desing: (a) Inside dimensions 455x610mm and 45cm deep for single pipe line : With Common burnt clay F.P.S. (non modular) bricks of class designation M-150). {Chapter No.25 Si.No.7a) |
| 45 | Red Sand stone work for wall lining etc. (Veneer work) 30mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) including camping jointing in white cemnet mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching complete. (Chapter No.18 Si.No.1 New) |
| 46 | 6mm thick plastering on ceilings and soffits of stairs upto floor two level instead of plastering in wall.(V) 1 cement : 3 fine sand (Chapter No.13 Si.No.4) |
| 47 | Finishing wall Putty Aproved brand and manufacture and of required shade and undecorated wall surface to give and even shade over and including curing and cost of all material. (15-Chapter Si.No.27 New) |
| 48 | Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply of all labour material and T&P required for proper completion of work. (Chapter No.15 Si.No.17) |
| 49 | Painting Two coats Over Priming coat (but excluding cost of priming coat) on New wood surfaces and other metal surfaces upto 10cm. Width or girth or small articles not exceeding 0.10 Sq.M. in Area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superiac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work. (Chapter No. 15 S.I. No.1(b)+2(b) new+642) |
| 50 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc. (A)15mm nominal outer dia pipes. (Chapter No.23 Si.No.8A) |
| 51 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board circular shape 450 mm dia. |
| 52 | Supply and fixing chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand). (18 New Item) |
| 53 | Providing & fixing stainless steel (Grade 304) raiding made of hollow tubes channels plates etc. including welding grinding, buffering polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolt complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc, of required size on the top of the floor or the side of slab with suitable arrangement as per approval of Engineer in-charge, (of payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 54 | Sub Total (A) |
| 55 | Deduction Cost of old brick |
| 56 | Deduction Cost of old brick bats |
| 57 | Sub Total (B) |
| 58 | Sub Total (A-B) = (C) |
| 59 | Add/Deduction Rs. For Estimate Figure Amount Match |
| 60 | Grand Total Please Enable Macros to View BoQ information |
