Tender For Schedule Of Jobs For Tvs Max Motorcycle - A.C. Pump Repair Kit Changing 2 A.C.Pump Fitting 3 Acc Wire Change 4 Air Cleaneer New Fitting 5 Air Compressure Big End Bearing Change 6 Air Compressure Cupling Change 7 Air Compressure Pipe, Malda-West Bengal

TDR : 54231926

Tender Notice
BOQ

3 Days Left

Malda , West Bengal

Tender Brief : Tender For Schedule Of Jobs For Tvs Max Motorcycle - A.C. Pump Repair Kit Changing 2 A.C.Pump Fitting 3 Acc Wire Change 4 Air Cleaneer New Fitting 5 Air Compressure Big End Bearing Change 6 Air Compressure Cupling Change 7 Air Compressure Pipe

Document Fees
Refer document

EMD
₹ 2000.0 /-

Tender Value
Refer document

Submission Date
06-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	A.C. PUMP REPAIR KIT CHANGING
2	A.C.PUMP FITTING
3	ACC WIRE CHANGE
4	AIR CLEANEER NEW FITTING
5	AIR COMPRESSURE BIG END BEARING CHANGE
6	AIR COMPRESSURE CUPLING CHANGE
7	AIR COMPRESSURE PIPE CHANGE
8	AIR COMPRESSURE PISTON RING CHANGE
9	AIR COMPRESSURE REPAIR KIT CHANGE
10	AIR COMPRESURE NEW FITTING
11	AIR FILTER WASH
12	AIR GOVERNOR KIT CHANGE
13	AIR TANK NEW FITTING
14	ALIGNMENT CHAKEUP
15	Alternator / Dynamo overhauling.
16	Alternator / Dynamo rear plate changing.
17	Alternator assly. New fitting.
18	Alternator assly. Over hauling & servicing.
19	AMPHEAR METER NEW FITTING
20	Axel chese pin new changing
21	AXEL HUB CHANGE
22	AXLE CHANGE
23	Axle oil seal new changing.
24	Back Dala Repairing Providing new M.S. including cost of all materials & fitting ,fixing 1 job.
25	Back door complete new making Providing new M.S. including cost of all materials & fitting ,fixing 1 job.
26	Back door dammage portion repair .
27	BACK INNER CHANGE
28	BACK LIGHT FITTING
29	Back one side mudguard damaged portion cutting out & providing new M.S.Sheet (1.18 guage) including cost of all materials and labour charges one job.
30	BACK PANNEL CHANGE
31	Back side outer body changed and fitting including all materials.
32	Back side outer body denting and necessary portion change including all materials.
33	BALL RACER CHANGE
34	Bar light fitting.
35	P.A system fitting ( including all metrails wire, clum & switch )
36	BATTERY BOX REPAIRING
37	Battery bracket damage portion cutting new sheet making and electric welding cost of labour charge.
38	Battery charging
39	Bavel pinion new changing.
40	Bearing Cone changing with lath job.
41	BELL CRANK KIT CHANGING
42	BELL CRANK SHAFT CUTTING & WELDING
43	BIG AND BEARING CHANGE
44	BLOCK FACING
45	BLOCK REPAIRING
46	BODY BACK SIDE REPAIR
47	BODY FRONT. SIDE REPAIR
48	BODY LEFT SIDE REPAIR
49	Body lower portion black paint by delux ICI 3 coat after dismentalling the body replacing the same including cost of all materials and labour charges.
50	BODY LOWER PORTION COLOUR
51	Body lower portion inside painting by delux ICI 3 coats one job.
52	body mounting bold gass cating 1 job
53	Body mounting change 1 job.
54	BODY RIGHT SIDE REPAIR
55	BODY SIDE PORTION REPAIRING BY 16 GAGESHEET
56	Body supporting pannel box old cutting and new M.S. Sheet providing including cost of all materials comp. One job.
57	Bonet damage portion patch repair 1 job
58	BONET GUTKA FITTING
59	BONET REPAIRING
60	BOOSTER CYLINDER HEAD GASKIT UNIT FITTING
61	BOOSTER NEW FITTING
62	Both side head light new fitting .
63	Both Side Link Welding , turning and rethreading .
64	Box ceiling new making by velvet cloth including cost of all materials and labour charge.
65	BOX CHANGE
66	Brake Adjusting and bleeding (each side)
67	Brake and clutch paddle bush change and greasing.
68	BRAKE DISK CHANGE
69	BRAKE DISK TURINING
70	Brake drum new changing.
71	Brake drum turning / faceing.
72	Brake flexible pipe new changing.
73	Brake lining change for one wheel
74	Brake lining new changing. (each)
75	BRAKE PADDLE REPAIRING
76	Brake shoe new changing. (each)
77	Brake steel pipe changing and repair.
78	Brake vacume diaphram change
79	Broken chassis necessary places electric welding by placing angle plate including cost of all materials and labour charges comp one job.
80	Blue Light & Hotter Fitting (including Materials wire, switch & clame)
81	BULB CHANGE 1 PC
82	BUMPER GUARD FITTING
83	BUMPER NEW FITTING
84	BUMPER REPAIRING (B)
85	BUMPER REPAIRING (F)
86	CABIN LIGHT NEW FITTING
87	CAM SHAFT NEW FITTING
88	CAMP SHAFT REPAIRING
89	CAR FAN FITTING
90	CARBORATOR NEW FITTING
91	CARBORATOR REPAIR KIT CHANGE
92	Carburator body resleeving.
93	Ceiling changing and fitting including cost of all materials and labour charges.
94	CELLING REPAIRING
95	Centre Bearing change each.
96	Centre Bearing bracket welding.
97	Centre Bearing rubber change.
98	CHAIN SPOKET FITTING
99	Chassis floor changing and chassis post welding one job.
100	CHASSIS CHANGE
101	Chassis front and rear cross member by welding checking of the alignment including labour charges comp.one job.
102	Chassis including under body full black paint by Delux ICI after dismentalling body and replacing the same including cost of all materials and labour charges.
103	Chassis stating & welding 1 job
104	CLUTCH BRACK PADEL SHAFT OPENING FITTING
105	CLUTCH CABLE FITTING
106	CLUTCH CONNECTION FITTING
107	CLUTCH CYLINDER KIT CHANGE
108	CLUTCH PADAL BUSH FITING AND REMAINING
109	CLUTCH PADDLE BUSH REMARING AND FITTING
110	CLUTCH PADDLE SHAFT FITTING
111	Clutch Padel assly changing.
112	Clutch Plate change .
113	Clutch release bearing changing.
114	CLUTCH CYLINDER FITTING UPPER/LOWER
115	Com. Exhaust pipe with Silencer Box opening, welding necessary place and fitting .
116	Com. Vehicle thoroghly polishing with rubbing compound .
117	Com.body nut bolt and packing changing .
118	Commutator carbon changing.
119	Comp. Body top damage portion making.
120	Comp. Fuel pump servicing including opening and refitting changes.
121	Comp. Vehicle wiring
122	Comp. Vehicles light checking and repair.
123	Complete body down from chassis and fitting.
124	COMPLETE BODY NUT BOLT CHECK UP
125	COMPLETE BODY PENTING BY DUCO PAINT
126	Complete ceiling and pad new making and fixing with Spl.quality velvet cloth including cost of materials one job.
127	Complete chassis new changing.
128	Complete front and rear floor damaged portion changing providing new M.S. sheet and match to original including cost of all materials one job.
129	Complete hood pointhing by ICI ducos 2 ( two )coots including cost of all matterals 1job (BLACK PAINT)
130	Complete left side outer body denting and necessary portion change including all materials.
131	Complete right side body denting and necessary portion change including all materials .
132	Complete seat cover (with best quality ordinary cloth) new making fitting.
133	Complete seat cover (Best Quality velvet cloth) new making match in fitting including cost of all materials one job.
134	Complete vehicle servicing including greasing .
135	COMPLETE WIRING MAKING (WITHOUT WIRE)
136	COMPLETE WIRING CHACKUP
137	Complite nylon hood new making providing( 540 tip top best quality ) incloding cost of all materialls 1 job.
138	Complite window net frame making inclodingcost of all materialls and labour charges 1 job.
139	COMPLTE BODY REPAIRING DENTING AND PAINTING
140	CRANK BEARING CHANGE
141	CRANK REPAIRING
142	Crank Shaft Grinding 1 job.
143	Cross member elictric welding.
144	Crown and tail new changing.
145	Cutout new changing.
146	Cutout repairing.
147	Cutting the making out damage portion of rear digging floor and welding including cost of all materials and labour charge comp. One job.
148	Cutting the taking out ,displaced portion of front bonnet to dash board portion straightening with providing new M.S. sheet as per original shape by gas welding including cost of all materials charges comp.one job.
149	CYLINDER BOARING
150	Cylinder box and taipipe gas welding .
151	Cylinder Linner Full set Changig including lath job& Labour Charge Comp. 1 job.
152	DASH BOARD REPAIRING
153	DASH BORD OPENING & FITTING
154	DEFENTIAL OIL SEAL CHANGE
155	DEFENTIAL SIDE BEARING CHANGE
156	Defincial adjusting new changing lock
157	Defincial cheek nut lock changing.
158	DICKY INNER CHANGE
159	Diesel filter top change.
160	Diesel main pipe changing.
161	DIESEL MAIN PIPE FITTING
162	Diesel tank opening cleaning surfacing and fitting.
163	DIFFERENCIAL BAVEL WASHER CHANGING
164	DIFFERENCIAL BEARING CHANGING
165	DIFFERENCIAL OPENING FITTING
166	Diffrential cheek nut lock changing .
167	Diffrential shim adjusting new changing lock.
168	Distant tube bush fitting and removing with pin bush fitting and removing.
169	DISTRIBUTOR CONDENSOR CHANGE
170	DISTRIBUTOR NEW FITTING
171	DISTRIBUTOR POINT CHANGE
172	DISTRIBUTOR ROTTER CHANGE
173	Door channel changing each.
174	Door damage portion cutting and new making, including cost of all materials and labour charges 1 pc.
175	Door damage portion cutting and new sheet making, setting and welding the same one job.
176	Door damage portion patch repair. 1 job
177	DOOR FITTING
178	Door glass and window glass chanel change.
179	DOOR GLASS CUTTING FITTING
180	Door glass fitting. (one fitting)
181	Door glass regulator machine opening repairing /new fitting. Required
182	Door kobja changing.
183	DOOR LIFTER MACHIN REPAIRING
184	Door lock changing ( one side).
185	Door lock changing (back dala).
186	Door lock repair ( one side).
187	Door lock repairing 1 job.
188	Door pad new making and fitting with Spl. Quality velvet cloth hard board and cost of all materials including labour charges one Pc.
189	DOOR RUBBER FITTING
190	DRAGLING KIT FITTING
191	Draglink over hauling including lathe job.
192	DRUG LINK NEW FITTING
193	DRUG LINK ROD CHANGE
194	Duet valve change
195	Duet valve kit change
196	Dust cover new changing .
197	Dynama armachar repairing
198	Dynama armeture changing
199	Dynama bearing changing
200	Dynama bush changing
201	Dynama carbon changing
202	Dynama fornt plate changing
203	Dynama overhauling
204	Dynama pully changing
205	Dynama rear plate changing
206	Dynama rectifire change
207	DYNAMO ARMATURE REWINDING
208	DYNAMO BEARING FITTING
209	DYNAMO BUSH FITTING
210	DYNAMO CARBON FITTING
211	ECU NEW FITTING
212	Eng. Chamber packing change.
213	ENGIN PISTON CHANGE
214	Engine And GB alinment checking.
215	Engine Comp. Over Hauling Including Lath Job and Laboar Charges Comp.
216	ENGINE CROSS CHANGE
217	ENGINE GEAR BOX CROSS CHANGE
218	ENGINE HEAD OPENING FITTING, GASKIT CHANGE & VELVE GRINDING
219	Engine Head Opening, facing refitting the same 1 job.
220	Engine Head Opening, Repair & Fitting Including Labour Charge Comp 1 Job.
221	ENGINE MACHINING JOB
222	Engine mounting changing (1pc).
223	ENGINE OVER HAULLING
224	ENGINE PLATFORM CHANGE
225	ENGINE PULLY FITTING
226	Engine side profile setting.
227	Engine tuning 1 job
228	ENGINE UP AND DOWN FITTING CHARGE
229	Engine Valve Seat Cutting, New Making & setting the same 1 job.
230	EURO BOX CHANGE
231	FAN BELT FITTING
232	Feed pump valve changing including servicing.
233	Feul pump oppening and fitting
234	FIELD COIL TAPPING
235	FILTER OIL CHANGE
236	FINGER KIT CHANGING
237	FLY WHEEL RING GEAR CHANGING
238	Fly wheel ring gear changing and refitting the same.
239	FLY WHEEL TURNING
240	FOG LIGHT FITTING
241	Fog light new fitting one pc.
242	FOOT BOARD REPAIRING
243	Foot rest making new, including cost of all materials and labour charges one PC.
244	Fornt cross member damage porson repair
245	Fornt defencial repair incloding lath
246	Fornt one wheel bracked changing
247	FOUR SET SHACKLE ASSEMBLY NEW FITTING
248	FOUR SET SPRING PATTY CHANGE
249	FOUR SET SPRING PATTY UP
250	Four wheel gear box over hauling with all new parts fitting fixing and testing comp. Including coast of all labour charges 1 job.
251	four wheel greasing.
252	Front 2 wheel greasing.
253	FRONT AXLE LINE CHANGE
254	Front axle overhauling including lathe job.
255	FRONT BAZIL SET NEW FITTING
256	Front both side seat new making VIP type including cost of all materials and labour charges one job.
257	FRONT BOTH SIDE CHATTAL REPAING
258	FRONT BOTH SIDE MUDGUARD REPAING & FITTING
259	Front both side spring high up and bush changing.
260	Front bumper new changing and fitting.
261	Front bumper opening and fitting.
262	Front cross member repair / changing.
263	FRONT GLASS FRAME FITTING
264	Front glass frame opening damage cutting new sheet making by M.S.Sheet welding the same one job.
265	FRONT GLASS FRAME REPAIRING
266	Front glass new fitting .
267	Front grill bracket welding.
268	Front inner grill and both side support plate repairing by cutting out damaged M.S.Sheet and new M.S.Sheet (guage) setting denting with adjustment properly one job.
269	Front left side floor damaged portion cutting and new M.S.Sheet providing including cost of all materials and labour charges one job.
270	Front mudguard new making by new M.S.Sheet including cost of all materials and labour charges (to match the existing one pc.one job.
271	FRONT MUDGUARD ONE PC. FITTING &MAKING
272	Front right side compete door making by new M,S.sheet (1.18 gage)including cost of all materials 1 job.
273	FRONT SEAT FRAME REPAIRING BY ANGLE
274	Front seat with back rest new making inculding cost of all materials & labour charges (to match the existing one pc. One job)
275	FRONT SHOW GRILL REPAIRING
276	Front suspension complete overhauling (both side).
277	Front wheel hub repairing, checking & greasing.
278	Fuel pump & Injector complete over hauling and opening & fitting .
279	Fuel pump nozzle testing and pressure setting (each).
280	Fuel pump opening and fitting.
281	FUEL TANK NEW FITTING
282	FULL BODY RUBBER CHANGE
283	FULL BODY ZEBRA PAINTING WITH DUCO PAINT
284	FULL BORDER CHANGE
285	Fuse box change.
286	GATE LOCK FITTING
287	Gear top cover repairing.
288	GEAR BOX CHAPA CHANGE
289	GEAR BOX CHAPA WELDING GRANDING & REPAIRING
290	Gear box comp. overhauling with all new parts fitting fixing and testing .
291	GEAR BOX FLANGE CHANGING
292	Gear box mounting changing.
293	GEAR BOX OPENING FITTING
294	GEAR BOX PENION CHANGE
295	Gear box top oil seal changing.
296	Gear lever repair.
297	Gear oil cheaking and adding necessary.
298	Glass regulator machine reparing 1 job.
299	Grill tapping
300	HALF YOKE CUTTING AND WEALDING
301	HALF YOUKE CHANGING
302	HALF YOUKE CUTTING & WELDING
303	Hand brake oil new changing
304	Hand brake system over hauling.
305	HEAD :& BLOCK FACING
306	HEAD CRACK REPAIRING
307	HEAD GARNING
308	Head Gasket Chang 1 job
309	HIGH ROD CHANGE
310	HOOD FRAM PAINTING WITH PAINT
311	Hood frame repairing.
312	HOOD MAKING
313	HOOD REXIN FITTING CHARGE
314	HOOTER BROCKET CHANGE
315	HOOTER NEW FITTING
316	HOOTER REPAIRING & FITTING
317	Horn necessary repairing and fitting.
318	HORN REPAIR
319	Hub new changing with lathe job.
320	Hub strat new changing with lock.
321	Hubs lathe turning one job.
322	INDICATOR LIGHT FETTING
323	INJECTOR FETTING
324	INJECTOR PUMP FITTING
325	INJECTOR SERVICING
326	KILOMETER CABLE / PENION FITTING
327	King pin bearing new changing / repair (one side).
328	King pin bush lathe massing -1 job.
329	King pin bush lathe work side.
330	king pin greasing
331	King pin Over hauling one side.
332	King pin over holling 1 job
333	Knuckle Oil Seal Changing.
334	KNUCKEL WEALDING AND THRATE MAKING
335	Light line checking repairing and necessary bulb changing.
336	Link overhauling one side
337	Main Bearing Changing Re-fitting the Same Including Labour Charges Comp. 1job.
338	Main bearing oil seal changing (Charge including opening and fitting).
339	MAIN SHAFT WELDING & TURNING
340	Making /writing STOP plate including cost of all materials & labour charges one.
341	Making of police plate including cost of all materials and labor charges (NORMAL)
342	Making police plate including cost of all materials and labor charges (VIP)
343	Making registration Numbering both front and rear side including cost of all materials.
344	MARSHALL REPAIRING
345	MASTER CYLINDER ASEMBLY CHANGE
346	Master cylinder repair kit change 1 job.
347	Matting set new making by rubber including cost of labour charge.
348	MIDDLE CROSS CHANGE
349	Middle cross member new plate making and electric welding.
350	Mobil and mobil filter change diesel filter change air cleaner servicing .
351	Mobil chamber necessary welding
352	Mudguard damage portion patch repair with materials and labour charges. 1 side
353	Mudguard Inner damage portion cutting wealding including cost of all materials and labour charges comp.one PC..
354	Mudguard rubber new fitting both side .
355	New fitting siren with connection & new making bracket including cost of all materials.
356	New R.T box making fitting the same.
357	Nozzel oppening and fitting one job.
358	OIL METER NEW FITTING
359	OIL PRESSURE PIPE CHANGE
360	OIL PUMP NEW FITTING
361	Oil pump repairing.
362	One set new horn fitting with connection.
363	ONE SET SPRING PATTY CHANGE
364	ONE SET SPRING PATTY UP
365	One side axle repair including lathe job.
366	One side door checking and adjusting.
367	One side shockabsorber new fitting (fornt).
368	One side shockabsorber new fitting (rear).
369	One side shockabsorber plate welding (fornt).
370	One side shockabsorber plate welding (rear).
371	One side spendel repair including lathe job.
372	One side spring bush change .
373	Opening back rest adding dunlop pillow rexine & covering with best quality foam rexine ,one job including cost of all materials and labour charges.
374	Opening front both side hub & drum break servicing hub greasing change oil seal and fitting adjusting bleading comp. One job.
375	Opening front seat adding dunlop pillow rexine & covering with best quality foam rexine including cost of all materials and labour charges one job.
376	Opening P/Shaft change yoke & teeth cross bearing ,holder etc,cutting & welding of yoke & fitting fixing comp. One job.
377	Opening P/Shaft cross ,holder change.
378	Opening P/Shaft cross bearing change.
379	Opening P/Shaft yoke & teeth change.
380	Opening rear both side hub & drum break servicing bearing greasing fitting adjusting bleeding comp.one job.
381	Opening rear seat adding dunlop pillow rexin and covering with best quality cost of all materials one job.
382	Painting the chassis and applying rubber seal comp lower portion of floor & dikky applying ICI anticrosive paint including cost of all materials & labour charge comp one job.
383	PAPULAR SHAFT OPENING FITTING
384	Piston ring changing & valve grinding 1 job
385	Piston with pin and circlip change 1 job
386	POPULOR SHAFT YOKE & TEETH CUTTING & WELDING
387	Pressure Plate change.
388	Propular shaft cross bearing new changing .
389	PUMP & NOZZEL OVERHAULING
390	PUMP OPENING FITTING
391	PUMPTURE TUBE REPAIRING
392	RADIATOR 1PC. PIPER CUTTING & SOLDERING
393	RADIATOR CROSS CHANGE
394	Radiator hose pipe change.
395	Radiator opening fitting.
396	Radiator servicing./ opining and fitting.
397	Radiotor braket damage portion macking.
398	Radiotor leakage portion repairing.
399	Radiotor open out neccssary repairing leakage soldering and refitting the same.
400	Rear body floor complete damaged portion cutting out and providing new M.S.Sheet (1.15 guage) including cost of all materials and labour charges one job.
401	Rear both side spring high up and bush changing.
402	Rear bumper new changing and fitting.
403	Rear differential repair including lath job.
404	Rear door rubber changing.
405	Rear floor necessary places cutting out and new sheet M.S.sheet (1.15 guage) providing including cost of all materials and labour charges comp.one job.
406	REAR GLASS / RUBBER CHANGE
407	Rear load body long beam opening fitting wooden bracket cutting drilling including cost of all materials and labour charges comp.one job.
408	Rear middle seat new making VIP Type inculding materials and labour charges one job.
409	REAR MUDGUARD INNER PLATE CHANGING ONE SIDE
410	REAR MUDGUARD ONE PC.FITTING & MAKING
411	Rear one wheel bracket changing .
412	Rear seat frame new making.
413	REAR SEAT REPAIRING BY RAXIN FOME ETC.
414	REAR SIDE CHATTAL PLATE CHANGING ONE SIDE
415	REAR WINDOW CHANNEL CHANGE
416	REAR WINDOW RUBBER CHANGE
417	RED COLOUR PAINTING
418	Removing old hood new hood making by best quality rexine cloth including cost of all materials and labour charges.
419	Replacing left and right side lower channel by welding and new one as per original including cost of all materials & labour charges comp.
420	Right side floor damaged portion cutting and new M.S.Sheet providing including cost of all materials (Front side) one job.
421	ROCKER ASSEMBLY FITTING
422	Rocker bush fitting and remaring 1 job.
423	ROCKER BUSH REMAIRING
424	Rocker cheriae change.
425	ROCKER SHAFT, BUSH FITTING
426	Rocker stand change.
427	Roof carrter with stair making
428	Roof tarfelt fitting cost of all materials including labour charges comp.one job.
429	Star box fitting
430	VIP light fitting
431	Scraping thoroughly the body to remove the old painting the whole body with ICI Duco paint 3(Three) coat and also rubbing and polishing including cost of all materials and labour charges comp. And also including application of Primer and Surfacer one job.
432	Seat (Rear one side ) dismentalling brake rest & seat extention and high including cost of all mettarials. 1 job.
433	SEAT COVER MAKING
434	seat front dismentalling brake rest frame extention and high including cost of all matterials 1 job , also seat high extra.
435	SELF ARMATURE REWINDING
436	Self armiture changing .
437	Self commodar catting & place.
438	Self over huling and servicing
439	SELF REPAIRING & FITTING
440	Self solonoid switch repair / change.
441	Self startar fielt coil tapping.
442	Self starter bendix changing.
443	Self starter head changing.
444	SERVO KIT CHANGE
445	SHACKLE CHANGE
446	SIDE GLASS CHANNEL CHANGE
447	SIDE GLASS RUBBER CHANGE
448	SIDE LIGHT FITTING
449	Silencer box and tail pipe gas welding.
450	SILENCER BOX WELDING
451	SILENCER FITTING
452	SILENCER PACKING CHANGE
453	SILENCER PIPE WELDING
454	Spark plug new fitting 1 job.
455	SPARKING PULLY NEW FITTING
456	Speedometre comp. Changing .
457	Speedometre cable with casing changing.
458	Spring high up one side.
459	Spring pati welding each.
460	Spring hanger electric welding one PC.
461	SPRING ONE SET HIGH MAKING
462	SPRING ONE SET OPENING FITTING
463	Star pinion new changing .
464	STEARING BOX BUSH REMARING AND FITTING
465	STEARING COLUM NEW FITTING
466	STEARING CROSS ASSEMBLY CHANGE
467	STEARING JACKET BEARING FITTING
468	STEARING ROD RANGA SOLDERING
469	STEARING WHEEL CHANGE
470	STEARING YOKE AND TEETH CHANGE
471	Steel top strighting patching welding including labour charges.
472	Steering Bell crank over hauling and greasing.
473	Steering box. Opening and overhuling.
474	Steering system overhauling.
475	Stepney cover new making by rexine.
476	Str. Ball crank over houling and greasing
477	Suspension balance bush change.
478	Suspension bush kit changing.
479	Suspension nassary palce welding.
480	Suspension overhauling both side.
481	SUSPENSUR KANCHI CHANGE
482	Tail bearing new changnig.
483	Tail oil seal new changing.
484	TAIL PENION OIL SEAL CHANGING
485	TANA ROD BRACKET CHANGE
486	TANA ROD NEW FITTING
487	Takia making with all materials.
488	Tapped adjusting including labour charge 1 job.
489	Tarfelting inside flooe (complete) best quality including cost of all materials & labour charges.
490	TARPOLIN FITTING PESTING
491	TERMINAL CLAMP WELDING
492	Tie-rod set chang and wheel alighment .
493	Timing belt change.
494	Timing Cover Changing 1job.
495	Timing Cover Oil Seal Changing 1job.
496	TANA ROD REPAIR
497	Touch up whole body with ICI Duco paint one coat and also rubbing and polishing including cost of all materials & labour charges one job.
498	Touching up paint necessary places of all body with ICI Duco paint one cost and also rubbing and polishing including cost of all materials and labour charges comp.one job.
499	Tube lickage repering one job
500	TURBO O / FITTING

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

West Bengal Tenders

Vehicles and Accessories Tenders

Vehicle Maintenance Tenders

Vehicle Maintenance Service Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Schedule Of Jobs For Tvs Max Motorcycle - A.C. Pump Repair Kit Changing 2 A.C.Pump Fitting 3 Acc Wire Change 4 Air Cleaneer New Fitting 5 Air Compressure Big End Bearing Change 6 Air Compressure Cupling Change 7 Air Compressure Pipe, Malda-West Bengal

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Schedule Of Jobs For Tvs Max Motorcycle - A.C. Pump Repair Kit Changing 2 A.C.Pump Fitting 3 Acc Wire Change 4 Air Cleaneer New Fitting 5 Air Compressure Big End Bearing Change 6 Air Compressure Cupling Change 7 Air Compressure Pipe, Malda-West Bengal

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us