|
| 1 | Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 110 watt to 130 Watt and confirming to IP 66 Protection having company LOGO engraved complete in all respect including labour. CAT - AAA.12100-14300 system lumens high power LED with lenses, > 110lm/W, PF>0.95, THD<10% at full load, CRI>70, potted driver set (Not circuitory), phase to phase protection at 440 V & > 300V auto cut and re-start feature, with 5 year warrantee. |
| 2 | Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 75 watt to 90 Watt and Confirming to IP 66 Protection having company LOGO engraved complete in all respect including labour. CAT-AAA8250-9900 system lumens high power LED with lenses, > 110lm/W, PF>0.95, THD<10% at full load, CRI>70, potted driver set (Not circuitory), phase to phase protection at 440 V & > 300V auto cut and re-start feature, with 5 year warrantee. |
| 3 | Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 4 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing and lenses built with mandatory driver set suitable for 140 to 150 Watt. Confirming to IP 65/66 protection complete in all respect including labour. CAT- AAA1540-16500 system lumens high power LED with lenses, > 110lm/W, PF>0.95, THD<10% at full load, CRI>70, potted driver set (Not circuitory), phase to phase protection at 440 V & > 300V auto cut and re-start feature, with 5 year warrantee. |
| 5 | Supply and laying aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (10 sq. mm 4 core.) |
| 6 | 25 sq. mm 3-1/2 core. |
| 7 | Supply and Wiring of submains with two nos. of 2.5 sq. mm. FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T & P required for proper completion of the work as directed at site by Engineer in charge. |
| 8 | Supply and fixing of 1 mtr. 40 mm. dia. G.I. pipe bracket with pole cap suitable for 9 mtr. S.T. pole all complete required for proper completion of work as per direction of E./Ic. |
| 9 | Supply & erection of \"D\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. |
| 10 | Supply & fixing of 75 mm x 90 mm shackle insulator /100 mm x 65 mm pin insulator including G.I. Bolts / spindle nuts etc. complete in all respect. |
| 11 | Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm.) of specified size and shape including form work, plastering if required, curing etc. as required. (volume of pole/pipe not to be deducted). |
| 12 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. |
| 13 | Supply and fixing of 40 Amp. TPN of of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. |
| 14 | Less 5 % on Total of all above items as per government sanction order. (Rs. 1,73,63,134.00 x 5% = 8,68,156.70) Please Enable Macros to View BoQ information |
