|
| 1 | Table Office Clerk Steel, FD 1004 |
| 2 | S&F in replacement withnew table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS of Make (As per particular specification) including teak wood edging 6 mm thick duly french polished after preparation of surface shall be provided all around the top as per drg complete all as specified and directed. |
| 3 | S&F in replacemnt withnew lock with duplicate key for table of (As per sampleand as directed by Engr-in-Charge) all as shown on drawing. |
| 4 | S&F in replacement withnew rubber shoe of superior quality as per sample approved. |
| 5 | S&F in replacement with new PVC recessed handle of superior quality as per sample approved and making the drawer movements smooth by applying grease/suitable lubricant as directed by Engr-in-Charge |
| 6 | M&Lfor preparation surface of table and paint one coat synthetic enamel paint 1st grade of colour as directed by Engr-in-Charge Make : (As per particular specification) internally and externally complete incl applying putty wherever required. |
| 7 | Table Office Officer Steel (FD-1003) |
| 8 | S&F in replacement with new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS of Make (As per particular specification) including teak wood edging 6 mm thickduly french polished after preparation of surface shall be provided all around the top all as directed . |
| 9 | S&F in replacement with new lock with duplicate key for table of make as per particular specification all as shown on drawing. |
| 10 | S&F in replacement with new rubber shoes of superior quality as per sample approved. |
| 11 | S&F in replacement with new PVC recessed handle of trade pattern of superior quality as per sample approvedand making the drawer movements smooth by applying grease/suitable lubricant as directed by Engr-in-Charge |
| 12 | M&Lfor preparation surface of tableand paint one coat synthetic enamel paint 1st grade of colour as directed by Engr-in-Charge (Make as per particular specification) internally and externally complete incl applying putty where required. |
| 13 | Charpoy GI pipe FD-220 |
| 14 | S&F in replacement with newplywood commercial 12mm thick BWP grade ISI marked of Make as per particular specification of size 1980x900mm all as directed by Engr-in-Charge. |
| 15 | Almirah steel large FD-1031 |
| 16 | S&F in replacement with new lock with duplicate key of Make : (As per particular specification) all as shown on drawing. |
| 17 | S&F in replacement with new 125mm CP handle with nut and bolts of Make as per particular specification |
| 18 | S&F in replacement with new 75mm hinges of superior quality as per sample approved. |
| 19 | M&L for repair ofshelves of almirah for fixing the shelves in place using required clips/welding all as directed by Engr-in-Charge. |
| 20 | M&Lfor preparation surface of Almirah Steel large and paint one coat synthetic enamel paint 1st grade of colouras directed by Engr-in-Charge (Make as per particular specification) internally and externally complete incl applying putty where required. |
| 21 | Almirah med steel FD-243 |
| 22 | S&F in replacement with new lock with duplicate key of Make : (As per particular specification) all as shown on drawing. |
| 23 | S&F in replacement with new 125mm CP handle with nut and bolts of Make as per particular specification and all as shown on drawing. |
| 24 | S&F in replacement with new 75mm hinges ofsuperior quality of make as per sample approved. |
| 25 | M&Lfor preparation surface of Almirah Steel Medium and paint one coat synthetic enamel paint 1st grade of colouras directed by Engr-in-Charge (make as per particular specification) internally and externally complete incl applying putty where required. |
| 26 | Charpoy IP hard top FD/MAP II/01 |
| 27 | S&F in replacement with top made of plywood commercial 12mm thick confirming to IS BWP grade in one piece of Make as per particular specification all as shown on drawing. |
| 28 | S&F in replacement with new rubber shoe of superior quality as per sample approved. |
| 29 | M&Lfor preparation of surface of charpoy and paint one coat synthetic enamel paint 1st grade of colouras directed by Engr-in-Charge (Make as per particular specification) to complete steel surface incl applying putty where required. |
| 30 | Bed Hard FD/E6/MAP/08 (R) |
| 31 | S&F in replacement with new plywood top commercial 12mm thick BWP grade ISI marked of Make as per particular specification to bed hard all asshown on drawing and as directed by Engr in Charge |
| 32 | S&F in replacement with new new head board18/19mm thick prelaminated Partical board exterior grade confirming to IS of Make as per particular specification to bed hard all as per shown on drawing. |
| 33 | S&F in replacement with newfoot board18/19mm thick prelaminated MDF board exterior grade confirming to IS of Make as per particular specification to bed hard all as per shown on drawing. |
| 34 | S&F in replacement with new rubber shoe of superior quality as per sample approved. |
| 35 | M&Lfor preparation of surface of Bed Hard and paint one coat synthetic enamel paint 1st grade of colouras directed by Engr-in-Charge (Make as per particular specification) to complete steel surface incl applying putty where required. |
| 36 | Rack shoe steel FD/MAP II/02 |
| 37 | M&Lfor preparation of surface of rack shoe and paint one coat synthetic enamel paint 1st grade of colour Black or as directed (Make as per particular specification) to complete steel surface incl applying putty where required. |
| 38 | Rack Adjustable steel 6 tier FD-1038 |
| 39 | M&Lfor preparation surface of and paint one coat synthetic enamel paint 1st grade of colouras directed by Engr-in-Charge (Make as per particular specification) to complete steel surface incl applying putty where required. |
| 40 | M&Lfor removing unsv nut and bolts S & F new nut and bolts of superior quality to fixing the shelves system all as shown on drawing. |
| 41 | Locker steel , FD -1029 |
| 42 | S&F in replacement with new CP hasp and staple as per drg of Make as per particular specification |
| 43 | S&F in replacement with new 125mm CP handle with nut and bolts of Make as per particular specification and all as shown on drawing. |
| 44 | S&F in replacement with new 75mm hinges of superior qualityas per sample approved. |
| 45 | S&F in replacement with new CP hanging rod with brackets as per drg including necessary welding of brackets |
| 46 | M&Lfor preparation of surface of locker and paint one coat synthetic enamel paint 1st grade of colour as directed by Engr-in-Charge (Make as per particular specification) internally and externally complete incl applying putty where required. |
| 47 | Table Computer FD/E6/MAP/03 |
| 48 | S&F in replacement with new key board tray made out of 18/19 mm prelaminated Particle board exterior grade on telescopic channel of shape and size with PVC lipping all around as directed and as shown in drg. |
| 49 | S&F in replacement with new telescopic channel of approved make as directed by Engr-in-Charge and all as per drawing including fixing of keyboard tray/drawers in place. |
| 50 | S&F in replacement with new drawer made out of 18/19 mm prelaminated Particle board exterior grade on telescopic channel of shape and size with PVC lipping as directed and a knob as shown in drg. |
| 51 | Table Bedside FD/E6/MAP/15(R) |
| 52 | S&F in replacement with new top drawer made out of 18mm prelaminated particle board for the front face and 12mm plywood BWP grade on sides ,bottom and back and PVC lipping all around as directed including fixing of the drawers in place and rest all as shown in drg. |
| 53 | S&F in replacement with new bottom drawer made out of 18mm prelaminated partcle board for the front face and 12mm plywood BWP grade on sides,bottom and back and PVC lipping all around as directed including fixing of the drawers in place and rest all as shown in drg. |
| 54 | M&Lfor preparation of surface of table bedside and paint one coat synthetic enamel paint 1st grade of colouras directed by Engr-in-Charge (Make as per particular specification) complete as directed. |
| 55 | Chair writing(Chair padded with arms), FD/E6/MAP/12 |
| 56 | S&F PVC Lipping andtapestry cloth of superior quality as approved.Note: Each unit include cloth change for both seat and back includingremoving old unserviceable Tapestry cloth and PVC Lipping of chair writing both of back rest and seat and replacing the same and . |
| 57 | S&F in replacement with new arms rest made of black integral skin polyurethane with MS insert and with nut and bolts of trade pattern as approved. |
| 58 | M&L forpreparation of surface of Chair writing painting of two coat synthetic enamel paint 1st grade of colouras directed by Engr-in-Charge (Make as per particular specification) complete as directed. |
| 59 | Chair revolving cushioned seat & back PCM-7031,FD/E6/MAP/01,PCH-5002T |
| 60 | S&F in replacement with new gas lift/hydraulic assy including tighting the frame work etc. |
| 61 | S&F arm rest of superior quality, nut and bolts includingremoving old unsv Poly Urathene Armrest |
| 62 | S&F in replacement with new wheel base including tighting the frame work. |
| 63 | S&F in replacement with new castor wheel of superior quality including tighting the frame work. |
| 64 | M&L for removingold seat and back cover cloth and upholstering new tapestry cloth along with PVC lipping for seat and back of superior quality as specified and directed. Note: Each unit include cloth change for both seat and back. |
| 65 | Chair Varandah GI FD- 259 |
| 66 | M&L for removing old unserviceable cane/newar from chair varandah and recanning with approved quality of cane plastic 4mm/5mm half round wide in Godrej Pattern complete all as specified and directed by Engineer in Charge. |
| 67 | S&F in replacement with new Hard rubber shoe of superior quality as shown on drawing. |
| 68 | M&L for preparation of steel surfaces of chair varandah by scrapping, rubbing, cleaning including making good of bendsand appyling two coat of synthetic enamal paint of colouras directed by Engr-in-Charge (Make as per particular specification) complete as directed. |
| 69 | CHAIR CBA STEEL WITH ARMS FD-75(M) |
| 70 | M&L for removing existing old unserviceable Seat and Back(Both) of Chair Steel Tubular with Arm (FD-75) and Welding MS FIat 11\" x 2\" and 4mm thick for seat (02 Nos) and Welding MS FIat 8\" x 2\" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge and carrying out below tasks:-(a)Scrapping Steel GI Tubing parts (frame Work) of chairs for removal of rust, dirt and applying Two coat of SE paint (colour or shades approved by Engr-in-Charge) (b) S&F Plywood 12mm thick commercial size 18\" x 17\" fixed on welded MS Flat (Iron) with the help of suitable screw for a seat and paste 50mm U Foam (Cushion) on plywood for cushioning of Seat coverd with tapestry cloth and black cloth linen at bottom side with the help of suitable stapler pin and upholstery work.(c) S&F Plywood 12mm thick commercial size 18\" x 15½\"fixed on welded MS Flat (Iron) with the help of suitable screw for a Back and paste 50mm U Foam (cushion) on plywood for cushioning of Back coverd fully with tapestry cloth with the help of suitable stapler pin and upholstery work .Note : (i) Fixing of both Seat and Back including all the above mentioned tasks such as welding,fixing and painting will be considered as one unit. (ii). Tapestry cloth shades shall be as approved by Engr-in-Charge |
| 71 | S&F in replacement with new caps as per drg. |
| 72 | S&F in replacement with new hand rest made of PVC in Black colour as per sample. |
| 73 | S&F in replacement with new suitable PVC/hard rubber shoes as directed by Engr in Charge. |
| 74 | Table typist Steel, FD 1005 |
| 75 | S&F in replacement with new table top in one piece made out of 18/19mm thick prelaminated partical board exterior grade confirming to IS of Make (As per particular specification) including teak wood edging 6 mm thick duly french polished after preparation of surface shall be provided all around the top as per drg. |
| 76 | S&F in replacement with new lock with duplicate key for table of (As per sampleand as directed by Engr-in-Charge) all as shown on drawing. |
| 77 | S&F in replacement with new rubber shoe of superior quality as per sample approved. |
| 78 | S&F in replacement with new PVC recessed handle of superior quality as per sample approved and making the drawer movements smooth by applying grease/suitable lubricant as directed by Engr-in-Charge |
| 79 | M&Lfor preparation surface of table and paint one coat synthetic enamel paint 1st grade of colour as directed by Engr-in-Charge Make : (As per particular specification) internally and externally complete incl applying putty wherever required. |
| 80 | Table 3\"x3\" Steel, FD 1009 |
| 81 | S&F in replacement with new table top in one piece made out of 18/19mm thick prelaminated partical board exterior grade confirming to IS of Make (As per particular specification) including teak wood edging 6 mm thick duly french polished after preparation of surface shall be provided all around the top as per drg. |
| 82 | S&F in replacement with new rubber shoe of superior quality as per sample approved. |
| 83 | M&Lfor preparation surface of table and paint one coat synthetic enamel paint 1st grade of colour as directed by Engr-in-Charge Make : (As per particular specification) internally and externally complete incl applying putty wherever required. |
| 84 | Almirah Large steel 1/2Hx1/2SH FD-1034 |
| 85 | S&F in replacement with new lock with duplicate key of Make : (As per particular specification) all as shown on drawing. |
| 86 | S&F in replacement with new 125mm CP handle with nut and bolts of Make as per particular specification |
| 87 | S&F in replacement with new 75mm hinges of superior quality as per sample approved. |
| 88 | M&Lfor repair of door system and shelves of almirah to make it functional smoothly all as directed by Engr-in-Charge. |
| 89 | M&Lfor preparation surface of Almirah Steel large1/2H x 1/2SH and paint one coat synthetic enamel paint 1st grade of colouras directed by Engr-in-Charge (Make as per particular specification) internally and externally complete incl applying putty where required. |
| 90 | Steel furniture (Tables, Locker, Almirah,Book case, Bed, Chair etc) |
| 91 | M&Lfor electric welding point upto exec 10mm to 25mm to the broken joints of steel furniture (tables, locker, almirah, book case, bed, chair etc) wherever required all as directed by Engr-in-Charge |
