|
| 1 | Washing rubbing down and stopping of distempered surfaces any type of wall incl preperation of old surface and then apply two coats of oil bound distemper of any tint including 1mm wall care putty etc complete all as specified and directed. |
| 2 | Preperation of old plastered surfaces ofceiling and making smooth surface by applying ready mix putty where required and apply one coat ofoil bound distemper etc complete all as specified and directed. |
| 3 | M&L for preparation of surfaces by bio wash of approved make by jet spray/brush to remove algae, dust particle, smoke soot, moulds, moss and efforescent salts etc by washing, rubbing down and stopping of any type of old painted wall surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ ltr and UV resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm on of wall, ceiling cornices including one coat of ready mix putty where required etc complete all as specified and directed. |
| 4 | Preperation of old painted surfaces of woodand applying one coat of synthetic enamel paint any description not other described over 10cm width or girth etc complete all as specified and directed. |
| 5 | -ditto- as per BoQ Item No 4 above but on steel surfaces etc complete all as specified and directed. |
| 6 | Taking down cement plaster on brick wall stone wall etc including raking outjoints, hacking for key securing down with water etc complete all as specified and directed. |
| 7 | M&L for rendering 10 mm thick in cement mortar 1:6on fair faces of brick work or concrete surfaces finish even & smooth without using extra cement etc complete all as specified and directed. |
| 8 | M&L for preparation of newly plastered surfaces preparatory to distempering,Priming plastered and other surfaces with alkali resistant priming paint, 1mm thick wall care putty & applying two coats of distemper oil emulsion, white or tinted on walls etc complete all as specified and directed. |
| 9 | M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface with liquid WPC as per manufacturer instruction and finished surface even and smooth without using extra cement complete all as specified and directed (Note - liquid WPC shall not be measured and paid separately) |
| 10 | M&L for applyingtwo or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ ltr and UV resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over new surface incl preparation of surfaces of walls etc complete all as specified and directed. |
| 11 | M & L 5mm thick plastering in cement mortar 1:3 finished even & smooth, without using extra cement on ceiling etc complete all as specified and directed. |
| 12 | M&L, preparing newly plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and directed. |
| 13 | Taking down 15 mm GI steel tubing and connections etc complete all as specified and directed. |
| 14 | S&F of CPVC 20mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 15 | S&F in repair bib taps (long body) , cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule & fixed . Size 15mm etc complete all as specified and directed. |
| 16 | Supply and fixed in repair 15 mm size stop valve copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union etc complete all as specified and directed. |
| 17 | S&F sinks with drainage board made of stainless steel 1 mm thick kitchen with plug ,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410mm x 330mm x160mm fixed in repairs etc complete all as specified and directed. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. |
| 19 | M&L 15mm thick Screed bed or bedding layer 1:6 for laying floor finishes etc complete all as specified and directed. |
| 20 | M & L Rendering 10 mm thick in cement mortar 1:4 on Vertical Surface etc complete all as specified and directed. |
| 21 | M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing etc complete all as specified and directed. |
| 22 | Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations etc complete all as specified and directed. |
| 23 | M&L Glazed ceramic coloured tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mmthick set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. |
| 24 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. |
| 25 | Taking down shutters of any description not exceeding 1 sqm eachfrom chowkhats, complete all as specified and as directed. |
| 26 | Taking down shutters of any description, exceeding 1.0 sqm but not exceeding 2 sqm each, from chowkhats, complete all as specified and directed. |
| 27 | Taking down chowkatsor framesnot exceeding1.5 Sqmeach complete all as specified and directed. |
| 28 | Taking down chowkatsor frames exceeding1.5 Sqmand notexceeding 4 Sqm each complete all as specified and directed. |
| 29 | S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed. |
| 30 | S&F 2nd class hard wood, 35 mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a); supplied & fitted to Chowkatsall as specified. |
| 31 | S&F factory made second class hard wood plain framed panelled shutter (Two panel) with lock rail and pannel of 9mm thicks BWP commercial ply or 12 mm veneeredparticle board with commercial vereered on both faces the size of rails and style as per IS 1003 (Part-I) kiln seasond and chemically pressure treated 40 mm thicks etc complete all as specified and directed. |
| 32 | S&F powder coated anodised aluminum frame for sliding door, sliding windows, ventilators, partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 33 | S&F powder coated aluminium shutters for window/ ventilators, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 Nos), suitable handle (1 No) complete all as specified and directed. |
| 34 | S&F 4 mm thick, sheet glass, plain/frosted ordinary quality and glazingwithoil putty / beedingin squares not exceeding 0.5 sqm each pane all as specified . |
| 35 | M&L Preparing new wooden surfaces of any description exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primerall as specified and directed. |
| 36 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire & avrage width of aperture 1.4 mm & fixed with aluminium wire staple fixed wooden/aluminium doors/window etc complete all as specified and directed. |
| 37 | S&F300 mm , MS rat tail rod pattern springs, including roller and roller plate complete fixed etc complete all as specified and directed. |
| 38 | S&F Aluminium , anodized barrel tower bolt of extruded section & fixed 150mm long in size etc complete all as specified and directed. |
| 39 | S&F Extruded aluminium alloy handles, fabricated type, anodized. 150 mm long in size fixed etc complete all as specified and directed. |
| 40 | S&F 100 mm longbutt hinges, medium weight, cold rolled mild steelcomplete all as specified and directed |
| 41 | S & Ffloor door stopper 140mm long of aluminium alloy body and fixed to door shutter.fixed etc complete all as specified and directed. |
| 42 | S&F aluminium alloy anodized sliding door bolt withhasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt or extruded section or cast aluminum alloy and fixed 250mm size etc complete all as specified and directed. |
| 43 | S&F 19 mm dia decorative aluminium anodized alloy curtain rod fixed with two brackets in each window length fixed in repairs etc complete all as specified and directed. |
| 44 | S&F continuous (piano) hinges, 30mm wide mild steel, bright finish or electrogalvanised etc complete all as specified and directed. |
| 45 | S&F Ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed etc complete all as specified and directed. |
| 46 | S&F aluminium mortice lock 2 levers, vertical type, size 65 mm complete all as specified and directed. |
| 47 | M&L for 18 mm thick marine ply wood grade BWP, type waterproof BB fixed with screws to timberframe work, block boards, grade 2 quality, interior grade, fixed with screws to timber framed work for kitchen cabinet,cupboard etc complete all as specified and directed. |
| 48 | Providing chemical emulsion for post construction anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors/wall etc complete all as specified and directed. |
| 49 | Providing chemical emulsion for post constr anti termite treatmentalong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron etc complete all as specified and directed. |
| 50 | M&L for 18mm thick multiwood modular kitchen cabinets (box type), inside depth not less than 0.55M, water proof, termite & borer proof, corrosion free with melamine polished shutter and auto closer counter sunk hinges, stainless steel handles and fixing of baskets complete all as specified and directed.Note : (i) Only front facing area of cabinet in sqm will be measured for payment, which includes necessary material and labour for fixing/fabrication of cabinet with adhessives, cleats and SS hinges, auto closer counter sunk hinges, stainless steel handles (ii) The rate inclusive of dismantling of existing cupboards and the rate for existing dismantled particle board/wooden board added in schedule of credit in sqm (iii) Stainless steel baskets mentioned as supply only seperately and fixing under this item. |
| 51 | Supply only a set of stainless steel baskets with fittings as in modular kitchen cabinet as per following details : (i) Plate basket 21\" x 19\" x 8\" - 01 No (ii) Plain basket 21\" x 19\" x 8\" -01 No (iii) Plain basket 17\" x 19\" x 8\" - 01 No (iv) Cutlery basket 17\" x 19\" x 4\" - 01 No (v) Cup & saucer basket 17\" x 19\" x 4\" - 01 No (vi) Single pull out 8\" - 01 No (vii) GT- PT & drop tray 22\" - 01 No (viii) Telescopic channels of appropriate size as required to fix the baskets in cabinet (Make : First quality of sleek/Ebco/Dolin) all as specified and directed by Engr-in-Charge |
| 52 | Dismatling plain or corrugated steel sheeting/AC sheet, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed. |
| 53 | M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 54 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 55 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for complete all as specified. |
| 56 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 Gde E-165 ® etc complete all as specified and directed. |
| 57 | M&L for 2 coats ofsynthetic enamel paint on new Steel surfacesof any description, not otherwise descri-bed, over 10cm width or girth includingpreparation of surfaces etc complete all as specified and directed. |
| 58 | Note: An amount of Rs 13060.00 on account of Credit Schedule for Schedule A Part II shall be deducted from the total amount of BOQ to arrive at Contract Sum. |
