|
| 1 | Disconnecting electric supply and dismantling old unsv LT cubical electric meter panel/box of any type/ size including electric meters and all connected MCCB/MCBs, CT, Volt & Ammeter and control wiring,etc at various locations of JAKLI RC complete all as specified and directed by engr-in-charge. |
| 2 | Supply, fixing and fabricate LT cubical electric meter panel/box of any type/ size and commissioning of MS sheet electric meter box 2 mm thick double door with locking arrangement of size/ dimention not less than 130 x 75 x 30 cm with suitable thickness of hylem sheet for fixing existing electric meter 06 Nos, including provision of new MCCB 100 Amp -01 No, MCB SPN 32 Amp-07 Nos with suitable size of copper busbar for phase & neutral,CTs, Volt meter, Ammeter selector switch,and see through glass 08 connnecting internally prewired copper conductor through PVC conduit concealed with electric meter connection of required size and applied with powder coated synthetic enameled paint and making good to the distrubed wall surfaceand making good to the distrubed wall surface etc complete all as specified directed by Engr-in-Charge. |
| 3 | M & L for disconnecting electric supply from electric meters and dismantling bldg electric distribution panels of any size including MCCB, MCBs volt & ammeter and control wiring etc complete at various OTM, Offrs and JCO/OR accn at JAKLI RC and material and labour for denting, panel doors as per site, one coat of red oxide and two coats of powder coated synthetic enameled paint, fixing of suitable capacity new busbar,MCCBs/MCBs, Volt & Ammeter, CTs, selector switch and control wiring and making connection with existing electric meters including connecting internally prewired copper conductor through PVC conduit in concealed and making good to the distrubed wall surface etc complete all as specified directed by Engr-in-Charge. Note: The rates for denting, Painting, panel doors, busbar,CTs, selector switch, PVC conduit, control wiring and making good to the distrubed wall surface are include the cost of item. (ii) MCCBs, MCBs, Volt & Ammeter ara measured and paid separately. |
| 4 | Supply and fixing of moulded case circuit breaker Four pole 200 Amps 25 KA capacity 415V 50Hz with adjustable thermal and magnetic relayincl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 5 | Supply and fixing of moulded case circuit breaker Four pole 160Amps 25 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply and fixing of moulded case circuit breaker Four pole 125 Amps 35 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 7 | Supply and fixing of moulded case circuit breaker Four pole 100 Amps25 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 8 | Supply and fixing of moulded case circuit breaker Four pole 63 Amps25 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 9 | Taking down old and unserviceable, distribution board any type including/ sheet metal enclosures, after removing all connection and make good the disturbed surface all as directed by Engr-in-charge. |
| 10 | Supply and fixing in replacement Sheet Metal enclosuredouble door for DBs when MCBs to be used TPN-4 Waywith 200 Amp rated bus bar complete all as specified and directed. |
| 11 | Supply and fixing in replacement Sheet Metal enclosuredouble door for DBs when MCBs to be used SPN- 8 Way with 200 Amp rated bus bar complete all as specified and directed. |
| 12 | Description all as per ser Item No 11 above but SPN - 12 Way complete all as specified and directed. |
| 13 | Supply and fixing in replacement 415V 10KA \"B\" curve miniature circuit breaker (MCB) TPN and current carryingcapacity63 Amp in the DB complete with connection testing and commissioning complete all as directed by Engr-in-charge. |
| 14 | Supply and fixing in replacementamp rating 240V, 10KA \"B\"curve miniature circuit breaker (MCB) SPN and current carrying capacity 40 Amps in the MCB DB complete with connection testing and commissioning. |
| 15 | Supply and fixing replacementamp rating 240V, 10KA \"B\"curve miniature circuit breaker (MCB) SP and current carrying capacity 5-32 Amps in the MCB DB complete with connection testing and commissioning complete all as directed by Engr-in-charge. |
| 16 | Taking down old and unserviceable submain wiring any size of two core including earth wire complete including batten/ conduit and make good the disturbed surface to match the existingsurface complete all as directed by Engr-in-charge. |
| 17 | M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4.0 Sqmm to be drawn through in PVCcasing caping in walls/roof/floors including taking down the old submain wiring all as directed by Engineer in Charge.Notes:- (i) Two wires of 4 sqmm and one wire of 4.0 sqmmand one run of PVC conduit shall be measured as one unit complete all as directed by Engr-in-charge.. |
| 18 | M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through in PVCcasing caping in walls/roof/floors including taking down the old submain wiring all as directed by Engineer in Charge.Notes:- (i) Two wires of 6 sqmm and one wire of 6 sqmmand one run of PVC conduit shall be measured as one unit complete all as directed by Engr-in-charge. |
| 19 | M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 10 Sqmm, earth continuity conductor of size 10 Sqmm to be drawn through in PVCcasing caping in walls/roof/floors including taking down the old submain wiring all as directed by Engineer in Charge.Notes:- (i) Two wires of 10 sqmm and one wire of 10 sqmmand one run of PVC conduit shall be measured as one unit complete all as directed by Engr-in-charge. |
| 20 | Taking down old and unserviceablealumunium/copper point wiring inbatten/ conduit and make good the disturbed surface to match the existingsurface, complete all as specified and directed by Engr-in-charge. |
| 21 | M&L for Point wiring using FRLSLH PVC insulated unsheathed, multistranded copper conductor cable 1.5 sqmm drawn through and including PVC conduit of min 20 mm dia by Cutting chases for conduits and sinking\"s for boxes and making good to walls, floors etc fo concealed conduit wiring with modular flush box metal of GI sheetminimum 1.8 mm thickwith earth terminal for safety, flush metal GI box ofrequired modules as per site requirement and modular cover plate with support frame white in colour of required modules,3mm thick including all fittings i.e. tees, bands and junction boxes, screwsetc. complete for one light/fan/bulb point controlled by one switch 6 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing) Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate complete. Note:- (a) wiring shall be done by using colour coding(b) Earth wire shall be of green colour. |
| 22 | Description all as per ser item No 21 above One 3 pin socket outlet, 5/6 Amp socket outlet on same boardwith other switches. |
| 23 | Description all as per ser item No 21 above but One 3 pin socket outlet, 5/6 Amp socket outlet on independent board complete all as directed by Engr-in-charge.. |
| 24 | Description all as per ser item No 21 above but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as directed by Engr-in-charge. |
| 25 | Description all as per ser item No 21 abovebut One bell / buzzer point controlled by one bell push on independent board complete all as specified and directed. |
| 26 | Supply and fixing socket,6A - 2/3 pin combined 2 module, fabio series 6 Amps 3 pinunversal socket with child safety shutter, Shrouded terminals compatible with all standard mobile chargers, ISI marked for the same board complete all as specified and directed. |
| 27 | Supply and fixing modular switch 1 way 6A, 1 module modular Switch fabio classic white series/Switch fabio classic white with indicator, ISI marked switch complete all as specified and directed. |
| 28 | Supply and fixing modular switch 2 way 6A, 1 module modular Switch fabio classic white series/Switch fabio classic white with indicator, ISI marked switch complete all as specified and directed. |
| 29 | Supply and fixing modular bell/buzzer switch 1 way 6A, 1 module modular Switch fabio classic white series/Switch fabio classic white with indicator, ISI marked switch complete all as specified and directed. |
| 30 | M & L for point wiring to one 3 pin 15/16 Amps socket outlet independent switch board, using FRLS-H PVC insulated unsheathed, multistranded copper conductor cable 2.5 sqmm drawn through and including PVC conduit of min 20 mm dia by Cutting chases for conduits and sinking\"s for boxes and making good to walls, floors etc for concealed conduit wiring with modular flush box metal of GI sheetminimum 1.2 mm thick with earth terminal for safety, flush metal GI box ofrequired modules as per site requirement and modular cover plate with support frame white in colourof required modules,3mm thick including all fittings i.e. tees, bands and junction boxes, screwsetc. complete for power point controlled with cables, 2.5 sq. mm size, Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate complete. (2.5 Sqmm for Phase and neutral and 2.5 Sqmm for earthing) complete all as directed by Engr-in-charge. |
| 31 | Supply and fixing in replacementSocket6/16A - 2/3 pin combined 2 module,(Fabio classic white) shuttered socket (heavy duty) 3 pinunversal socket with child safety shutter, Shrouded terminals compatible 2 ton AC and 3.5 KW geyser, ISI marked for the same board complete all as specified and directed. |
| 32 | Supply and fixingin replacement modular Switch fabio classic white series/Switch fabio classic white with indicator, ISI marked 16 Amps One Way switch complete all as specified and directed. |
| 33 | Supply and fixing in repairCeiling rose, 3 phase/PVC/polycarbonate, isolated body type complete all as specified and directed. |
| 34 | Supply and fixing in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd at site complete all as per specified and directed. |
| 35 | Supply & Fixing in repair only LED lights fitting 20 W LED 6000K(4Ft),(Warm/ Warm White) 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 36 | Supply and fixing in repair LED light fitting2 feet, 10 watt 220 V AC (Warm/ White) decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 37 | Supply and fixing in repair modular 5 stepped type electronic fan regulator- 2M 100W laser marking as reqd at site complete all as per specified and directed. |
| 38 | Supply and fixing in repair round shape slim fit down light LED 15 Watt round recess (Warm/ Warm White) 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size completecomplete all as specified and directed. |
| 39 | Supply and fixing in repair square shape 36 watt 220 volts AC recessed mounting typelow depth aesthetically designed LED 2x2 feetflat (Warm/ Warm White) panels, with high efficiency PMMA diffuser soft glare free light (Warm/ Warm White) suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 40 | Supply and fixingin repair socket out let 5 Amps 3 pin flush type for the same board complete all as specified and directed. |
| 41 | Supply and fixingin repairs witch socket combination 5 Amps 2 in 1 flush type multipurposes for independent board complete all as specified and directed. |
| 42 | Supply and fixingin repair switch socket combination out let 5/16 Amps 5 in 1 flush type complete all as specified and directed. |
| 43 | Supply and fixingin replacement Single pole and neutral enclosure with a two pin and earth plug and socketcomplete withone single pole MCB 20 Amp, 240 Volts complete all as specified and directed. |
| 44 | Renewal of Earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr.below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :-(a) Excavation and earth work or drilling hole for electrode in any type of soil (b)PCC pit in cement concrete 1:2:4 TYPE B-1 (.c)CI cover with suitable handle(d)Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified.(e)15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead.(f)Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion. |
| 45 | Supply and fixing in replacement 415V 10KA \"B\" curve miniature circuit breaker (MCB) TPN and current carryingcapacity63 Amp in the DB complete with connection testing and commissioning complete all as directed by Engr-in-charge. |
| 46 | Supply and fixing in replacement 415V 10KA \"B\" curve miniature circuit breaker (MCB) TPN and current carryingcapacity40 Amp in the DB complete with connection testing and commissioning complete all as directed by Engr-in-charge. |
| 47 | Supply and fixing in replacementamp rating 240V, 10KA \"B\"curve miniature circuit breaker (MCB) SPN and current carrying capacity 40 Amps in the MCB DB complete with connection testing and commissioning complete all as directed by Engr-in-charge. |
| 48 | Supply and fixing in replacementamp rating 240V, 10KA \"B\"curve miniature circuit breaker (MCB) SPN and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning complete all as directed by Engr-in-charge. |
| 49 | Supply and fixing replacementamp rating 240V, 10KA \"B\"curve miniature circuit breaker (MCB) SP and current carrying capacity 5-32 Amps in the MCB DB complete with connection testing and commissioning complete all as directed by Engr-in-charge. |
| 50 | S & F of Energy efficient LED street LightLuminaire 30/35 watts capacity comprises a die-cast aluminium housing including connections with 2 run of 1.5 Sq mm copper unsheathed wire multistranded from ceiling rose / junction box to the connector of fitting, complete all as specified. |
| 51 | M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 1.5 Sqmm, earth continuity conductor of size 1.5 Sqmm to be drawn through in PVCcasing caping in walls/roof/floors including taking down the old submain wiring all as directed by Engineer in Charge.Notes:- (i) Two wires of 1.5 sqmm and one wire of 1.5 sqmmand one run of PVC conduit shall be measured as one unit complete all as directed by Engr-in-charge. |
| 52 | S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting of LED lamp 9 watt complete all as specified and directed. |
| 53 | S & F LED lamp 9W LED lamp suitable for B-22 holder complete all as specified and directed. |
| 54 | Notes :- Amount of Credit Schedule for Schedule \"A\" Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum. |
