|
| 1 | SITC of Three Phase Open well ISI marked Submersible Pump Set of 7.5 HP capacity suitable for operation on 415V(+10%), 3-Phase AC supply compatible for operations on dynamic variable frequency/speed having IP 68 Protection including providing required no\"s of heavy duty MS clamps made of flat iron and suitable size top cover made of suitable thick MS sheet as required. and making of flexible IP68 cable connections etc. complete as required. |
| 2 | SITC of Three Phase Open well ISI marked Submersible Pump Set of 1.5 HP capacity suitable for operation on 415V(+10%), 3-Phase AC supply compatible for operations on dynamic variable frequency/speed having IP 68 Protection including providing required no\"s of heavy duty MS clamps made of flat iron and suitable size top cover made of suitable thick MS sheet as required. and making of flexible IP68 cable connections etc. complete of suitable head and discharge etc. complete as required. |
| 3 | SITC of Single Jet Crown Nozzles complete with ball joint for 15 Degree Pivoting made of Brass with Nickle Plating, flow straightner in following size. Height of water stream up to 10 mtrs. etc. complete as required.15 mm internal threaded with 6 mm orfice. |
| 4 | 25 mm internal threaded with 12 mm orfice. |
| 5 | SITC of Eco Cluster Nozzle made of Stainless Steel with inlet dia. 40 mm and 21 Nos. Single Jets to create 38 mm dia. Full Jet for height 10 mtr water level in depended etc. complete as required. |
| 6 | Supplying and fixing of following size of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 7 | Supplying and Laying of following size DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS: 14930, Part-II complete with fitting and cutting, jointing etc. direct-in-ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia. (OD-63 mm & ID-51 mm nominal) |
| 8 | Supplying, Fixing, Testing and Commissioning of Butterly Valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washer, gaskets confirming to IS 13095 of following size as required. 100 mm dia. |
| 9 | SITC of 100 mm dia. Debris Collection Strainer in Stainless steel 304 grade etc. complete as required. |
| 10 | SITC of fixing of following dia. Gun metal gate valve (Screwed type) on the existing pipeline, including testing & commissioning etc. complete as required.50 mm dia. |
| 11 | SITC of fixing of following dia. Gun metal Horizontal Non-Return valve (screwed type) on the existing pipeline, including testing & commissioning etc. complete as required.100 mm dia. |
| 12 | 50 mm dia. |
| 13 | SITC of underwater Luminaries surface mounted RGB LED Spot Light 6 x 3W with IP 68 protection, SS/aluminium dia. casting body with power coated paint, soft rubber gasket along with 2 years free replacement guaranty etc. complete as required. |
| 14 | Supplying & fixing PVC insulated PVC sheathed copper conductor Submersible Flat cable ISI marked in existing metal/HDPE/PVC/Pipe/in Bore well/in Sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required.3 Core 2.5 Sq mm Flat Cable |
| 15 | 3 Core 6 Sq mm Flat Cable |
| 16 | SITC of 40 mm dia. Revolving Jets with 6 arms in brass/gunmetal with chrome plated body as per design to produce dancing pattern water effect etc. complete as required. |
| 17 | SITC of following dia. Ball Joint for Bubbler Stream Jet Nozzle in brass/gunmetal with chrome plated body etc. complete as required. 25 mm dia. |
| 18 | 40 mm dia. |
| 19 | SITC of 3.00 Mtr. x 3.00 Mtr. Square shaped in 50 mm dia. Pipe size Stainless Steel 304 Grade having provision with 120 Nos. 15 mm dia. sockets and 50 mm dia. 2 Nos. etc. complete as required. |
| 20 | SITC of 0.45 Mtr. dia. Circular Shaped Ring in 25 mm dia. Pipe size Stainless Steel 304 Grade having provision with 25 Nos. 6 mm dia. sockets and 25 mm dia. 2 Nos. etc. complete as required. |
| 21 | SITC of adjustable Stainless Steel Stand (SS-304) for LED Lights 6 x 3 Watt & 12 x 3 Watt with all accessories including nuts, bolts etc. complete as required. |
| 22 | Supplying and Laying of PVC Insulated and FRLS Multi Core Round Sheathed Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade up to 1100 Volts as per IS: 694:2010 etc. complete as required.4C x 2.5 sq. mm |
| 23 | SITC of UPVC Pipes of confirming to IS 4985:2000 including all UPVC fitting i/c jointing with good quality solvent of following sizes etc. complete as required.110 mm OD Pipe for Delivery Lines |
| 24 | 63 mm OD Pipe for Delivery Lines |
| 25 | 50 mm OD Pipe for Delivery Lines |
| 26 | 32 mm OD Pipe for Delivery Lines |
| 27 | SITC of Fordged Brass Ball Valve complete as required.25 mm dia. |
| 28 | 40 mm dia. |
| 29 | 50 mm dia. |
| 30 | SITC of Stainless Steel 304 grade Sump Cover having size of 600 mm x 1500 mm including cutting, fixing/welding etc. complete as required. |
| 31 | SITC of 150 mm dia. and 1000 mm long GI Manifold to Connected Main Delivery Pipes to Pump etc. complete as required. |
| 32 | SITC of 900 mm dia. FRP Pressure High Rate Sand Filter for filtration of suspended material from water body complete with50 MM dia. input and output six position multiport valve for filter, backwash, rinse, waste, re- circulate and close all flow to pool the filter body manufactures in fibre glass with UV Resistance surface provided with oil pressure gauge, pressure 2.5 Kg/sq. cm and water turnover capacity of 31200 litre per hour etc. complete as required. |
| 33 | SITC of Silica Sand for filter with granulometry between 0.4-0.8 mm etc. complete as required. |
| 34 | SITC of Chlorine Feeder 6 Kg-Inline System having inlet size of 50 mm dia. etc. complete as required. |
| 35 | SITC of Floor Inlets Nozzle having inlet size of 50 mm dia. etc. complete as required. |
| 36 | SITC of floor mounted LT Feeder Pillar cubical type double door of size 900 (H) mm x 900 mm (W) x 300 mm (D) with general arrangement made out of 2 mm thick MS CRCA Sheet having hinged gasket covers and screwed knobs with double locking arrangement & Locking Hooks and separate Rain Protection Cover with extension of 100 mm in Width & Depth, supported with MS Angle Iron legs and bottom frame of size 40 mm x 40 mm x 6 mm x 1 mtr. long grouted with 1:3:6 CC foundation and should be 0.7 mtr. above ground level. Legs (around 25% of length OR as per direction of AE(E)-in-Charge) should be covered with brick walls, duly 1:4 cement plaster, connections, inter connections with suitable size of FRLS PVC insulated copper conductor using thimbles, ferrules wherever required, Painting with Primer, Numbering, Identification Plate of Component embossed and/or printed in Metalincluding Supply & Fixing of following accessories etc. complete as required (as per drawing approved by Engineer-in-Charge).(For 7.5 HP Pump-1 No. and 1.5 HP Filtration and Drain Pump-1 No.)a) 100 A, 30 kA Ics=100% Icu and Operational Voltage 690 V, 4 Pole MCCB- 1 No. (Incomer).b) 6 A to 32 A ratings, SP MCB, “C” curve, 10 KA breaking capacity- 2 Nos.c) 6 A to 32 A ratings, DP MCB, “C” curve, 10 KA breaking capacity- 4 Nos.d) 6 A to 32 A ratings, TPN MCB, “C” curve, 10 KA breaking capacity- 2 Nos.e) Single Phase Preventor VSP2- 2 Nos.f) Volt Selector Switch- 1 No.g) Ammeter (0-100 A) 96 sq. mm in size and 100/5 CT’s Ratio- 2 Set.h) Voltmeter (0-500 V) 96 sq. mm in size with Selector Switch- 1 Set.i) Auxiliary Contactor Block- 1NO- 2 Nos.j) Auxiliary Contactor Block- 1NC- 2 Nos.k) Overload Relay 7.5-10 Amp- 2 Nos.l) TPN Power Contractors MNX-9- 2 Nos.m) Digital Time Switch- 2 Nos.n) Start/Stop Push Button Assembly- 2 Nos.o) Indication Lamp (RYB) with Control HRC Fuse with Fuse Fitting- 2 Set.p) Pump Selector Switch- 1 No.q) 100 A, 4-Strip Al. Bus-Bar of minimum 400 mm long and of size 30 mm x 5 mm with sleeve and nut-bolts- 1 Set.r) 200 mm x 150 mm MV Danger Notice Plate of 2 mm thickness- 1 No.s) Earthing Stud- 2 Nos.t) Lifting hook on the top of feeder pillar- 1 Set. u) Lamp Holder inside Feeder Pillar- 1 No.v) 4 Way Neutral Link- 2 Nos. |
| 37 | Excavation and cleaning of malba from existing pit in fountain body with the help of labour and making it suitable for water filling i/c water proofing and repair of fountain body. |
| 38 | Supplying of following sizes of XLPE (Cross Linked Poly Ethylene) Insulated PVC Sheathed Alumimium Conductor Armoured Power Cable of 1.1 KV grade including connection, testing etc. as required.4C x 25 sq. mm |
| 39 | Laying of one number PVC Insulated and PVC Sheathed/XLPE Power Cable of 1.1 KV grade of following size Direct-In-Ground including Excavation and Refilling the Trench etc. as required, but Excluding Sand Cushioning and Protective Covering.Up to 35 sq. mm |
| 40 | Laying of one number PVC Insulated and PVC Sheathed/XLPE Power Cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required.Up to 35 sq. mm |
| 41 | Routine Maintenance & Operation of Fountain and other Electrical & Mechanical equipment’s associated with fountain as per Terms & Condition attached. |
