Name of Work: Special Repair toNH-516 from Km 0.000to 5.350 Km and from KM 336.500 to KM 338.450 ofNH-59 in the State of Odisha
Sl. No.
Item Description
1
Providing and applying tack coat with emulsionpressure distributor at the rate of 0.20kg per sqm on the prepared surface/ granular surface cleaned with mechanical brooms for Fresh laid surface cleaned with Mechanical broom.As per Data Book P 139 Sr. No. 5.2(503) Data for 7000 sqmUnit- 1 sqm
2
Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects. Pg-147-505.
3
Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete in all respects. Pg-151.Unit = cumTaking output = 191 cum
4
Road marking with Hot applied thermoplastic compound with Reflectorising Glass beads on bituminous surface by providing and laying of hot applied thermoplastic compound 2.5mm thick including Reflectorising glass beads @ 250gms per sqm area thickness of 2.5mm.is exclusive of surface applied glass beadsThe finished surface to be level uniform and free from streaks and holes as per IRC: 35 Data Book P.295 Sr. 8.13 (803) Data for 600sqm Unit- 1sqm
5
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign at curveS in ghat portion as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing, Fig.15.72 Single Chevron(Normal) IRC : 67-2012complete. 90 cm equilateral triangle
6
60 cm Circular(Speed Limit)
7
Hazard Marker
8
60cmx50cm(Chevron signs)
9
80cmx60cm(Informatary Sign Boards)
10
90cm Octagon(Stop sign boards)
11
Providing and Fixing of bi-directional retro reflective raised pavement markers of approved colour , quality and make conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesive including cost of all materials, labour,transportation, taxex, duties, sundries, T&P etc. complete. SoR 2022, P-235, Sl-15 For Edge line and C/L@ 18m C/C
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
