|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 1 meter from cutting edge |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 3 | P/L of stone Solling (Dully hand packed) incl. watering dressing and ramming with all carriages loadinf unloading and stacking (Complete Job) |
| 4 | Providing and laying in position cement concrete of specified grade 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 5 | Providing and laying in position cement concrete of specified grade 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 6 | Brick work with FPS bricks of class designation 75 in foundtion & plinth in cement mortar 1:6 (1 cement, 6 coarse sand) i/c extra for Brick work with FPS bricks of class designation 75 in superstructure upto plinth level |
| 7 | Brick work with FPS bricks of class designation 75 in foundtion & plinth in cement mortar 1:6 (1 cement, 6 coarse sand) i/c extra for Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto floor V |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for: Columns, pillars, piers, abutments, posts and struts. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended Floor |
| 12 | Reinforced cement conc. Work up to plinth level excld. Centring, shuttering in 1:1.5:3 20mm stone agg. Nominal size |
| 13 | Reinforced cement conc. Work in beams, suspended floors roofs having slope upto 15 deg. Landing balconies, shelves, lintels upto floor 5 level excld. Centring, shuttering in 1:1.5:3 20mm stone agg. Nominal size |
| 14 | Providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 15 | Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars) |
| 16 | Structural steel welded in built up sections incld cutting hoisting fixing in positon and applying a priminng coat of approved steel primer with painting all complete 40x40x5 mm |
| 17 | Dry Random Rubble massonry with hard stone in foundation and plinth without bond stone |
| 18 | Providing and laying vitrified floor tiles (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown (KAJARIA, SOMANY , NITCO OR EQ) (600 mm x 600 mm) |
| 19 | P/F first quality ceramic glazed wall tiles of app make in all colour shades excpt begundy, bottle green black of any size in skirting risers of steps dados over 12mm bed of cement mortar 1:3 complete |
| 20 | 12 mm Cement Plaster of mix 1:4(1 cement:4 coarse sand) |
| 21 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1:4 |
| 22 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 23 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 26 | P/F stainless steel railing made of hollow tubes, channels, plates.etc. incl. welding griding buffing, polishing and making curvature( Where ever Required) and fixing the same with stainless steel nuts and bolts complete including fixing the rail over SS posts with necessary acessories and stainless steel desh fasteners, Stainless steel bolts of required size on the top of the floor or the side of the watw slab with suitable arrangements as per approval of EIC -304 ( Complete JOb) |
| 27 | Carriage of materials By Mech.Transport, from source to site of work for 30 km avg lead |
| 28 | Carriage of Bricks By Mech.Transport, from source to site of work for 30 km avg lead |
| 29 | Sanitry and water supply Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 30 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 31 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 32 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 33 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 34 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 35 | Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia. |
| 36 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 37 | P/F of Cp/PVC Tube connecting pipe with sink/Basin/flushig Cistern and all other fitting accessories all complete job as per Directions of Site Engineer |
| 38 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe, 20mm OD(SDR-7.4) |
| 39 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe, 25mm OD(SDR-7.4) |
| 40 | P/F of PPR Unions 20mm |
| 41 | P/F of PPR Unions 25mm |
| 42 | Providing and fixing soil waste pipes 100mm dia PVC B-Class 100 MM |
| 43 | Providing and fixing soil waste pipes 100mm dia PVC B-Class 75 MM |
| 44 | Providing and fixing in position PVC Por S Traps |
| 45 | Water storage tank PVC tripple layer of approved brand with all necessary fittings |
| 46 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls. Please Enable Macros to View BoQ information |
